Name: soap formation from triglycerides
Uploaded: 2020-03-26T07:22:28.000Z
Duration: 4 min 10 s
Channel: JoVE

Vegetable oils and animal fats are naturally occurring lipids in plants or animals. Oils and fats are often in the form of triglycerides, which are formed from a molecule of glycerol and three fatty acids. A fatty acid is a weak carboxylic acid with a hydrocarbon chain as the functional group. In the triglyceride, the three fatty acids are linked to the molecule of glycerol by ester bonds. A triglyceride, therefore, has three ester groups, making the molecule a triester.
An ester is a type of organic molecule that is like a carboxylic acid, with the hydrogen of the hydroxyl replaced by an alkyl or aryl group. This group is labeled R-prime to show that it may be different from the R-group on the other side. In a triglyceride, R-prime is the glycerol backbone, and each R-group is the chain of a fatty acid.
Fatty acids with double bonds in their carbon chains are known as unsaturated fatty acids. These double bonds tend to be in the cis conformation, which puts a bend in the chain. Triglycerides with these bent chains can&#39;t fit closely together, so the attractive forces between them are typically long-range and weak.
Fatty acids with only single bonds between the carbon atoms are saturated. These unbent chains allow triglycerides to pack closely together, enabling stronger, short-range intermolecular interactions. This gives saturated triglycerides a higher melting point than unsaturated triglycerides, which are usually liquid at room temperature.
Triglycerides can be converted back to fatty acids and glycerol by hydrolyzing the three esters. Ester hydrolysis is a reaction that breaks an ester bond with a molecule of water or a hydroxide ion to form a carboxylic acid and an alcohol. One common use of ester hydrolysis is to create soaps, which are the salts of fatty acids from triglycerides. This process is called saponification.
In this reaction, hydroxide ions attack each of the three ester carbonyls in the triglyceride, yielding three fatty acid molecules and one molecule of glycerol. The fatty acid carboxylates associate with the counterion from the base, which is usually sodium or potassium.
But how does soap work? The long carbon chain is lipophilic and hydrophobic, meaning that it is attracted to fats but not to water. The carboxylate group is hydrophilic, meaning that it is attracted to water. When you mix soap and water, the long carbon chains tend to interact with each other and avoid interaction with water molecules, while the carboxylate groups prefer to interact with water. Ultimately, the soap molecules form clusters called micelles, with the hydrophilic carboxylates facing outward.
Now, let&#39;s assume there is hydrophobic grease on your hands. Simply rinsing your hands with water would not remove the grease. When you wash with soap, the grease interacts with the soap&#39;s carbon chains. As the soap molecules form micelles, they bring the grease into the hydrophobic core enclosing it in a hydrophilic shell that can then be rinsed away with water.
In this lab, you will perform as a saponification reaction to create soap from coconut oil and sodium hydroxide. You will then test the tolerance of your soap for hard water by comparing the foaming ability in deionized water, tap water, and a calcium chloride solution, which mimics extremely hard water.

hydrolysis of an ester

<h4>Triglycerides</h4>
Triglycerides are triester molecules composed of a glycerol backbone that is bound to 3 fatty acids. These form the basis of many biological lipids that are found in vegetable oils and fats. Lipids that are isolated from plant material are the basis of vegetable oils, whereas lipids extracted from animals are used as lard or general sources of fats.
A fatty acid molecule has a long carbon chain &#8212; between 12 and 20 carbons &#8212; with a weak organic acid at one end. Some fatty acids have double bonds in the carbon chain. These are &#8216;unsaturated&#8217; fats. Because of the double bond in the carbon chain, these fatty acids typically have a bent chain shape, as the bond tends to adopt the cis conformation rather than the trans conformation.
The triglyceride molecules in an unsaturated fatty acid are unable to stack uniformly, leading to less attractive forces between the molecules. Thus, unsaturated fats are usually liquid at room temperature. In contrast, saturated fats, meaning those with only single bonds in their carbon chain, are able to stack because their chain is more regular in shape. Saturated fats, therefore, have stronger attractive forces between the molecules and, as a result, higher melting points. Thus, saturated fats tend to be solid at room temperature.
<h4>Hydrolysis Reaction</h4>
Triglycerides, like other molecules possessing ester groups, are able to undergo hydrolysis. Hydrolysis is a type of chemical reaction where a water molecule breaks a bond. In the case of an ester hydrolysis, the nucleophile &#8212; water or a hydroxide ion &#8212; attacks the carbonyl carbon of the ester group to break the ester bond. One fragment of the original molecule gains the hydrogen ion from water to form an alcohol, while the other fragment gains the hydroxide group to form a salt of the carboxylic acid.
Under normal conditions, only a few hydrolysis reactions occur without the addition of a strong acid or base. The strong acid or base acts as a catalyst to speed up the reaction, and it is recovered at the end. The hydrolysis reaction is reversible. It is called a condensation reaction because it produces water as a side product.
The hydrolysis of a triglyceride is one of the oldest examples of a hydrolysis reaction, as it has been used for centuries to make soap. The reaction is called saponification.
<h4>Saponification </h4>
During saponification, hydroxide ions attack the carbonyl groups in the three esters of the triglyceride. Therefore, the stoichiometric addition of three moles of sodium hydroxide to one mole of triglyceride will result in the hydrolysis of the three ester groups. This reaction produces three moles of soap molecules and one mole of glycerol. Often, the reaction will be performed with sodium hydroxide as the limiting reagent to minimize the amount of unreacted triglyceride, which can reduce the drying effect of soap.
A soap molecule has a long hydrophobic carbon chain with a polar hydrophilic carboxylate anion on the other end. The difference in solubility along the molecule enables its cleaning ability. In water, the long carbon chains of the soap molecules will be attracted to one another and reorganize to avoid the polar water molecules. This orients the polar carboxylate heads towards the water molecules, forming a spherical structure known as a micelle. The center is hydrophobic, and the exterior is hydrophilic, allowing micelles to be soluble in aqueous solutions.
The micelle properties of soap are essential to its cleaning ability. Simply rinsing grease or oil off a surface cannot remove it. This is because grease is hydrophobic and not water-soluble. However, when soap is used, the grease enters the interior of the micelle. The exterior of the micelle is hydrophilic, so it can be rinsed away with water.
A significant drawback to soap is its intolerance to hard water. Hard water is an aqueous solution containing magnesium, iron, and calcium ions in the form of minerals. The &#8220;hardness&#8221; of water is dependent on the concentration of these ions. In the presence of metallic cations, soap molecules will interact with the molecules and cause them to fall out of solution, forming a salt precipitate more commonly referred to as soap scum.
<h4>References</h4>
<ol>
	<li style="font-size:17px">Kotz, J.C., Treichel Jr, P.M., Townsend, J.R. (2012). Chemistry and Chemical Reactivity. Belmont, CA: Brooks/Cole, Cengage Learning.</li>
	<li style="font-size:17px">Silberg, M.S. (2015). Chemistry: The Molecular Nature of Matter and Change. Boston, MA: McGraw Hill.</li>
	<li style="font-size:17px">Streiwiester, A., Heathcock, C.H., Kosower, E.M. (1998). Introduction to Organic Chemistry. Upper Saddle River, NJ: Prentice Hall.</li>
</ol>

Hydrolysis of an Ester

Triglycerides
Triglycerides are triester molecules composed of a glycerol backbone that is bound to 3 fatty acids. These form the basis of many biological ...

Education

JoVE Lab Manual

Chemistry

soap formation from triglycerides

Triglycerides are lipids made of a glycerol backbone linked to three fatty acids. They are common in vegetable oils and animal fats. Plant lipids are the basis of vegetable oils, while animal lipids are used as lard or general sources of fats.

A fatty acid has a long carbon chain, usually between 12 and 20 carbons, with a weak organic acid at one end. Some fatty acids contain double bonds. These are unsaturated fats. The double bond usually gives the chain a bent, cis shape. As a result, unsaturated triglycerides do not stack evenly and have weaker attractions between molecules. They are usually liquid at room temperature. Saturated fats have only single bonds. Their chains are more regular, so they stack more easily. This gives them stronger attractions and higher melting points, which is why they are often solid at room temperature.

Triglycerides can also undergo hydrolysis because they contain ester groups. Hydrolysis is a reaction in which water breaks a bond. In ester hydrolysis, a nucleophile such as water or a hydroxide ion attacks the carbonyl carbon of the ester. One part of the molecule becomes an alcohol after gaining a hydrogen ion from water. The other part becomes a salt of a carboxylic acid after gaining the hydroxide group. Under normal conditions, only a few hydrolysis reactions occur without a strong acid or base. The acid or base acts as a catalyst and is recovered at the end. This reaction is reversible. It is also called a condensation reaction because water is formed as a side product.

The hydrolysis of triglycerides is one of the oldest examples of this chemistry and has been used for centuries to make soap. This reaction is called saponification. During saponification, hydroxide ions attack the carbonyl groups in the three ester bonds of the triglyceride. With three moles of sodium hydroxide for one mole of triglyceride, all three ester groups can be hydrolyzed. The products are three moles of soap molecules and one mole of glycerol. In practice, sodium hydroxide is often the limiting reagent so less triglyceride is left over. That helps reduce the drying effect of the soap.

Soap Formation from Triglycerides

lab techniques

Measuring with Accuracy in the Lab

Measuring with accuracy in the lab starts with careful records, the right tools, and correct reading of data. Scientists use lab notebooks to record how an experiment was done. These notes include the amounts of materials used and each step of the procedure. Without that record, an experiment cannot be repeated in the same way. Balances and glassware are used to measure solids and liquids for experiments. The precision of a measurement depends on the equipment used. Digital balances show the...

scientific measurement and lab skills

Graphs, Curve Fit, and Standard Deviation

Two-dimensional graphs help students compare an independent variable with a dependent variable in science data. In a chemistry example, temperature is the independent variable and volume is the dependent variable. After data are collected, the relationship between the two measurements must be quantified so it can be evaluated and compared with other relationships. A graph can also show when no relationship exists between the two variables. To make a two-dimensional graph, each data point needs...

stoichiometry, product yield, and limiting reactants

stoichiometry-product-yield-and-limiting-reactants

Balancing Equations and Reactant Limits

Chemical equations show how reactants change into products during a reaction. Stoichiometry is the study of the relative amounts of reactants and products. It is based on the Law of Conservation of Mass, which says matter is neither created nor destroyed. Because atoms are only rearranged, the number and identity of atoms must match on both sides of a reaction. That is why a chemical equation must be balanced. A balanced equation has the same number of atoms for each element in the reactants...

redox reactions

Oxidation States in Redox Reactions

Oxidation states help identify redox reactions. In a redox reaction, oxidation is the loss of one or more electrons, and reduction is the gain of one or more electrons. These reactions are often tracked by changes in oxidation state, also called oxidation number. Each atom in a molecule has an oxidation state. This number shows how oxidized an atom is compared with its free elemental form. It is written as the charge an atom would have if every bond were purely ionic. In that model, bonding...

ideal gas law

Gas Laws Behind the Ideal Gas Equation

The ideal gas equation brings together the main gas laws used in chemistry. Gases have molecules that are far apart, so their behavior is described with four measurable variables: pressure, volume, number of moles, and temperature. The ideal gas law links these variables with the gas constant, R, which equals 8.314 J·K−1 mol−1. Boyle’s law describes the link between pressure and volume. When temperature and the number of moles stay constant, pressure and volume change in opposite directions.

acid and base concentrations

Acids, Bases, and pH in Titration

Acids, bases, and pH explain how acidic or basic a solution is. An Arrhenius acid releases hydrogen ions when it dissolves in water, while an Arrhenius base releases hydroxide ions. These reactions also create conjugate partners: an acid forms a conjugate base after losing hydrogen, and a base forms a conjugate acid after losing hydroxyl. Every acid has a conjugate base, and every base has a conjugate acid. pH measures the amount of hydrogen ions in a solution. The pH scale runs from 0 to 14...

buffers

Buffer pH and the Common Ion Effect

Buffer solutions help keep pH steady when acids or bases are added. In water, an Arrhenius acid (HA) dissociates into hydrogen ions, H+, and a conjugate base, A-. More hydrogen ions make a solution more acidic and lower its pH. An Arrhenius base (BOH) dissociates into a conjugate acid, B+, and hydroxide ions, OH-. Strong acids and strong bases usually change pH a lot because they react completely in water and raise the amount of H+ or OH-. Buffers reduce those pH changes. A buffer usually...

enthalpy of reaction

Reaction Heat, Hess’s Law, and Calorimetry

Reaction heat is explained through enthalpy, Hess’s law, and calorimetry. These ideas show how heat moves during chemical reactions and how scientists measure it. Thermodynamics is the study of heat energy and other forms of energy, such as work. Its laws are used across science, from biology to physics. The first law says energy is conserved in an isolated system. Energy can change form, such as thermal energy becoming work, but it cannot be created or destroyed. The second law of...

solubility

Solubility in Water and Other Solvents

Solubility describes how much of a solute can dissolve in a specific solvent. It is usually reported as solute mass per solvent volume or as solute mass per solvent mass. For example, sodium chloride has a solubility of 36 g per 100 mL of water at room temperature. If solubility is given by solvent mass, that mass must be converted to volume for later calculations. Temperature changes solubility. Sodium carbonate dissolves at about 7 g per 100 mL of water at 0 °C, 22 g per 100 mL at room...

metal flame emission

Flame Test Metal Color Clues

Flame testing uses a metal sample and a flame to identify a substance by its color. Each element gives off a characteristic light emission in the flame, so the color can help distinguish one element from another. This same idea appears in fireworks, where different metal components create different colors. The color comes from energy absorbed by the metallic component. When a species absorbs energy, that energy can go into translation, vibration, rotation, or electron excitement. Electron...

balmer series

Hydrogen Emission Lines

Hydrogen emission lines show how electrons move between fixed energy levels in the Bohr model. Niels Bohr proposed this model for the hydrogen atom in 1913. In this model, an electron can only occupy certain orbits, and it cannot exist between them. These energy states are labeled with the quantum number n. The ground state is n = 1. Higher values, such as n = 2, 3, 4, and so on, are excited states. An electron changes state only by absorbing or emitting energy equal to the difference between...

beer's law

Absorbance Spectra and Beer-Lambert Analysis

Absorbance spectra and the Beer-Lambert Law show how light can be used to study molecules in solution. When light hits a substance, it may be absorbed, transmitted, or reflected. A substance often interacts with a range of wavelengths, and each wavelength can affect the molecules or atoms in a different way. When a molecule absorbs light, that energy can be used for translation, vibration, rotation, or electron excitement. Electron excitement is especially important in spectroscopy because it...

concentration dependence

Reaction Order and Rate Constants

Chemical kinetics describes the speed of a chemical reaction. The rate depends on the reaction mechanism, the complexity of the reaction, and the number of reactants involved. Reactant concentration also affects how fast a reaction happens. The rate law is the experimental relationship that connects these factors to reaction rate. In the rate law, each reactant contributes through a reaction order. The general form is r = k[A]^m[B]^n for aA + bB + ... → cC. Here, r is the reaction rate, k is...

temperature dependence

Reaction Rate, Arrhenius, and Catalysts

Chemical kinetics explains how fast a reaction happens and why that speed changes. The reaction rate is the speed of a chemical reaction. It is defined as the change in concentration of a reactant or product over time. Reaction speed depends on several factors, including the concentration of the reactants and the temperature of the reaction. Each reactant affects the rate in a specific way. That relationship is described by the rate law. The rate law is an equation that connects the...

galvanic cells

Battery Power from Redox Reactions

Electrochemistry studies how chemical change and electrical energy are linked. In this branch of chemistry, electrons move from one species to another. That movement can either produce current or be driven by an applied current. The main reaction in electrochemistry is the oxidation-reduction, or redox, reaction. A redox reaction has two half-reactions. Oxidation is the loss of electrons, and reduction is the gain of electrons. These changes also shift the oxidation state of each substance. The...

electrolytic cells

Electroplating with Electrolytic Cells

Electrochemistry links electrical energy with chemical change, and electrolytic cells show how electricity can drive a nonspontaneous reaction. In these reactions, electrons move from one species to another. The key chemistry is a redox reaction, or oxidation-reduction reaction, which happens in two half-reactions. Oxidation is the loss of electrons, and reduction is the gain of electrons. The substance that loses electrons is the reducing agent, and the substance that gains electrons is the...

proper lab notebook keeping

Recording a Reproducible Lab Experiment

Accurate lab notebook records are essential in science and organic chemistry labs. Without clear notes, descriptions, quantities, and observations, an experiment cannot be repeated or checked. Good record keeping supports reproducibility, which means other people can follow the same work and get similar results. A laboratory notebook is useful in school labs, research settings, and industry. It can also become a legal record when an idea, process, substance, or technique is patented and...

basic organic chemistry techniques

Organic Lab Glassware and Safe Handling

Organic chemistry labs use specific glassware, careful weighing steps, and controlled heating to keep reactions safe and accurate. Beakers and Erlenmeyer flasks are often used for mixing or holding solvents, but they are not meant for measuring volume unless only an approximate amount is needed. Volumetric glassware is used when a precise volume matters. This group includes graduated cylinders, volumetric pipettes, and volumetric flasks. A graduated cylinder is commonly used in the organic lab...

melting points

How Impurities Change Melting Points

Melting point helps identify an organic compound by showing the temperature where a solid turns into a liquid at 1 atmosphere of pressure. It is a physical property, like solubility, density, color, and electronegativity. Because the exact start of melting is hard to measure, the result is reported as a range. The lower end is when the first drops of liquid appear. The upper end is when the last solid has melted. Scientists compare this range with literature values to help identify a compound. <br...

boiling points

Boiling Point and Vapor Pressure

Boiling point and vapor pressure are key physical properties of a liquid. For a pure compound, the boiling point can help identify the substance. In experiments, the boiling point is usually recorded as a range because exact values are hard to measure and may differ by a few degrees from the literature value. Vapor pressure explains why a liquid boils. In a sealed container, some molecules at the liquid surface gain enough energy to escape into the gas phase. At the same time, some gas...

recrystallization

Purifying Crystals by Solubility

Purifying crystals by solubility is a key organic chemistry technique. Recrystallization uses differences in solubility to separate a desired solid product from starting materials, solvent, and impurities. It is one of the three standard purification methods, along with distillation and extraction. Solubility is the maximum amount of a substance that can dissolve in a fixed volume of solvent at a given temperature. Different solutes dissolve in different solvents, and their behavior can vary...

extraction

Separating Mixtures with Solvent Extraction

Solvent extraction is a common way to separate and isolate a target compound in organic chemistry. In this process, a solute moves from one phase to another so it can be separated from unreacted starting materials or impurities. Extraction is also useful when a product is dissolved in a reaction solvent that is hard to remove by evaporation, such as a solvent with a high boiling point. There are three main types of extraction. In solid-liquid extraction, the solute moves from a solid phase...

simple distillation

Separating Liquids by Boiling Point

Separating liquids by boiling point is the goal of distillation. A miscible mixture contains liquids that mix evenly, and it can be heated so that the more volatile liquid evaporates first. Volatility is a liquid’s tendency to vaporize, and boiling begins when bubbles form in the liquid phase. In a closed container, liquid and vapor can reach equilibrium, which means the rate of vaporization equals the rate of condensation. The pressure from the vapor above the liquid is called vapor pressure.

steam distillation

Steam Distillation and Low-Boiling Separation

Steam distillation is a separation method for temperature-sensitive organic compounds. It works best when the organic compound is immiscible in water, meaning the two liquids do not mix. The method helps remove the organic molecule from a non-volatile contaminant without using the higher temperatures needed for many other separations. In steam distillation, the immiscible mixture is heated until both water and the volatile organic compound distill together. The vapor rises to a condenser,...

thin-layer chromatography

TLC Separation by Polarity

Thin-layer chromatography (TLC) separates compounds in a mixture by polarity. It uses the same basic parts as other chromatography methods: a stationary phase, a mobile phase, and the solute. In TLC, the stationary phase is a thin coating on a plate instead of material packed into a column. The stationary phase in most TLC systems is polar silica gel, a form of silicon dioxide. Its surface has OH groups that can form hydrogen bonds. The sample is first spotted on a pencil start line with a...

column chromatography

Separating Mixtures by Polarity

Column chromatography separates compounds in an organic chemistry lab by using differences in physical properties. It is especially useful for microscale separations when less than 10 grams of material is available for analysis. The method can separate a mixture based on solubility, polarity, hydrophobicity, size, and charge. Any chromatography system has three main parts: the stationary phase, the mobile phase, and the sample mixture. In column chromatography, the stationary phase is usually...

Triglycerides are lipids made of a glycerol backbone linked to three fatty acids. They are common in vegetable oils and animal fats. Plant lipids are the basis of vegetable oils, while animal lipids are used as lard or general sources of fats. A fatty acid has a long carbon chain, usually between 12 and 20 carbons, with a weak organic acid at one end. Some fatty acids contain double bonds. These are unsaturated fats. The double bond usually gives the chain a bent, cis shape. As a result,...

synthesis of luminol

Luminol Chemiluminescence in Forensics

Luminol chemiluminescence shows how a chemical reaction can produce light and help with blood detection. Chemical reactions may be endothermic or exothermic, depending on whether they absorb or release heat as reactants become products. The enthalpy of a reaction is the energy difference between reactants and products, or ΔH. A positive ΔH means the reaction is endothermic. A negative ΔH means it is exothermic. Many reactions do not happen in a single step. They can pass through intermediates...

esterification

Ester Formation and Everyday Fragrances

Esters are organic compounds with a carbonyl group attached to an oxygen that connects to another alkyl or aryl group. Their general formula is RCOOR'. They are often made by reacting a carboxylic acid with an alcohol in an esterification reaction. In this process, the hydroxyl group of the acid is replaced by an alkyl or aryl group. Many simple esters have familiar fruit and flower smells because their structures are small and less complex. Formic acid and methanol can combine to form methyl...

identification of unknown aldehydes and ketones

identification-of-unknown-aldehydes-and-ketones

Carbonyl Tests for Aldehydes and Ketones

Aldehydes and ketones are carbonyl compounds, which means they contain a C=O functional group. A ketone has two alkyl or aryl groups attached to the carbonyl carbon. Acetone is the simplest ketone, with two methyl groups. An aldehyde is similar, but it has at least one hydrogen attached to the carbonyl carbon. Formaldehyde is the simplest aldehyde, and acetaldehyde has one hydrogen and one methyl group. The carbonyl carbon in both aldehydes and ketones is electrophilic because the oxygen atom...

uv-vis spectroscopy of dyes

How Dyes Absorb Visible Light

Dyes absorb visible light because their molecular structure lets them interact with specific wavelengths. When light hits a substance, some light is absorbed and the rest is reflected or transmitted. The color we see depends on the wavelength that is reflected. A blue substance reflects blue light, around 430 to 480 nm, and absorbs the complementary orange region, around 590 to 630 nm. Compounds that do not absorb in the visible range appear colorless to the human eye. Light also has energy and...

identifying alcohols

Alcohol Tests for Primary, Secondary, and Tertiary

Alcohol tests can help sort alcohols by structure and reactivity. Alcohols are organic molecules with a hydroxyl group attached to an alkyl or aryl group, written as ROH. If the carbon with the hydroxyl group has one R group, the alcohol is primary. If it has two R groups, it is secondary. If it has three R groups, it is tertiary. Alcohols can also be aromatic when they contain a benzene ring. Phenol is the simplest aromatic alcohol. To identify an alcohol, chemists can use its chemical...

chemistry

Comprehensive, curriculum-focused videos for both instructors and students in introductory chemistry lab courses.

https://cloudfront.jove.com/files/banners/scicat/labbio.jpg

Explore how triglycerides break down during saponification to form soap and glycerol, and learn how soap cleans grease and reacts in hard water.

Soap Formation from Triglycerides | JoVE K12

Prepare a high school soap-making lab with coconut oil, NaOH, CaCl2, HCl, molds, dyes, and fragrance oils. Includes safety gear and student station setup.

Soap Synthesis from Coconut Oil | JoVE K12

Make soap from coconut oil and sodium hydroxide, then test pH and foam in soft, tap, and hard water to see how minerals affect lather.

Soap Making and Hard Water Testing | JoVE K12

Soap Formation from Triglycerides

Description

Transcript

Tags