Name: solids, liquids, gases, and plasma
Uploaded: 2023-06-23T15:38:43.000Z
Duration: 1 min 20 s
Channel: JoVE

K12 Standards

Virginia  Standards of Learning

HIgh School

Physics

PH.9

PH.9.e

States of Matter

Matter exists in three main physical forms: solid, liquid, and gas.
All molecules of matter have a specific amount of kinetic energy, which determines their physical state.
The molecules of solids are densely packed with little space around them and have limited movement. This gives solids a definite shape and volume.
Molecules in liquids are bound by strong, attractive forces, leaving little space around them. Yet they have enough energy to move freely, so the liquids can flow.
In gases, the molecules have high kinetic energy, move quickly past each other, and, as a result, have negligible intermolecular forces. With a lot of space around the molecules, gases have low densities making them compressible.
Matter can convert from one state to another as temperature and pressure change.
When the temperature rises, molecules can gain enough kinetic energy to overcome the intermolecular forces and transition to a less ordered state.
When the pressure rises, molecules are pushed closer to each other, increasing the intermolecular forces and changing matter to a more ordered state.&#160;

states of matter

Solids, liquids, and gases are the three states of matter commonly found on Earth. A solid is rigid and possesses a definite shape. A liquid flows and takes the shape of its container, except it forms a flat or slightly curved upper surface when acted upon by gravity. Both liquid and solid samples have volumes nearly independent of pressure. A gas takes both the shape and volume of its container.
Scientists have discovered a fourth state of matter, plasma, that occurs naturally in the interiors of stars. A plasma is a gaseous state of matter that contains appreciable numbers of electrically charged particles. The presence of these charged particles imparts unique properties to plasmas that justify their classification as a state of matter distinct from gases. In addition to stars, plasmas are found in some other high-temperature environments (both natural and man-made), such as lightning strikes, certain television screens, and specialized analytical instruments used to detect trace amounts of metals.
Some samples of matter appear to have one or more properties of solids, liquids, and gases simultaneously. This can occur when the sample is composed of many small pieces. For example, we can pour sand as if it were a liquid because it is composed of many small grains of solid sand. Matter can also have properties of more than one state when it is a mixture, such as with clouds. Clouds appear to behave somewhat like gases, but they are mixtures of air (gas) and tiny water particles (liquid or solid).
The differences in the properties of a solid, liquid, or gas reflect the strengths of the attractive forces between the atoms, molecules, or ions that make up each phase. The phase in which a substance exists depends on the relative extents of its intermolecular forces (IMFs) and the&#160; kinetic energies (KE) of the molecules. Particles in a solid are tightly packed together and often arranged in a regular pattern. In a liquid, they are close together with no regular arrangement. In a gas, they are far apart with no regular arrangement. Particles in a solid vibrate about fixed positions and do not generally move in relation to one another. In a liquid, they move past each other but remain in constant contact. In a gas, they move independently of one another except when they collide.
This text is adapted from <a href="https://openstax.org/books/chemistry-2e/pages/1-2-phases-and-classification-of-matter">Openstax, Chemistry 2e, Section 1.2: Phases and Classification of Matter</a> and&#160;&#160; <a href="https://openstax.org/books/chemistry-2e/pages/10-1-intermolecular-forces">Openstax, Chemistry 2e, Section 10.1: Intermolecular Forces</a>

Solids, liquids, and gases are the three states of matter commonly found on Earth. A solid is rigid and possesses a definite shape. A liquid flows and ...

Education

JoVE Core

Anatomy and Physiology

Unit 1

Fundamentals of Chemistry

KEY TERMS AND CONCEPTS

solids, liquids, gases, and plasma

Solids, liquids, gases, and plasma are the main forms of matter described here. Solids are rigid and keep a definite shape. Liquids flow and take the shape of their container, although gravity gives the surface a flat or slightly curved top. Solids and liquids also have volumes that stay nearly the same even when pressure changes.

Gases behave differently from solids and liquids. A gas takes both the shape and the volume of its container. In matter with this behavior, the particles are far apart and do not stay in regular positions.

Plasma is a fourth state of matter. It is a gaseous state that contains many electrically charged particles. Because of these charges, plasma has properties that are different from ordinary gases. Plasma occurs naturally in the interiors of stars and can also be found in lightning strikes, some television screens, and special analytical instruments that detect trace metals.

Some materials can seem to show more than one state at once. Sand can be poured like a liquid because it is made of many small solid grains. Clouds also mix different states, since they contain air as a gas along with tiny water particles that may be liquid or solid.

The state of a substance depends on the balance between intermolecular forces and kinetic energy. Intermolecular forces are the attractions between atoms, molecules, or ions, and kinetic energy is the motion of the particles. In a solid, particles are tightly packed and often arranged in a regular pattern. They vibrate in fixed positions rather than moving past one another. In a liquid, particles stay close together with no regular arrangement. They move past each other while remaining in constant contact. In a gas, particles are far apart, move independently, and only interact when they collide.

Solids, Liquids, Gases, and Plasma

what is matter?

Matter, Mass, and Weight Basics

Matter is the substance that makes up the universe, from a grain of sand to a star. Scientists define matter as anything that occupies space and has mass. Mass is the amount of matter in an object, while weight depends on gravity. Mass stays the same whether an object is on Earth or in the zero-gravity environment of outer space. Weight changes when gravity changes. An object weighs more where gravity is stronger and less where gravity is weaker. A piece of cheese that weighs a pound on Earth...

the periodic table and organismal elements

the-periodic-table-and-organismal-elements

Organismal Elements in the Periodic Table

The periodic table helps identify the elements that make up living organisms. Biology groups these as organismal elements because they are the chemical building blocks of life. These elements are found in different amounts in the body. Some are present in large quantities, while others are needed only in small amounts. The video connects the periodic table to the elements that organisms actually use. Understanding organismal elements helps students link chemistry to biology. It shows how...

atomic structure

From Atomos to the Modern Atom

Atoms are the tiny building blocks of matter, and ideas about them go back to the Greek philosopher Democritus. He suggested that everything on Earth is made of atomos, a Greek word meaning "indivisible." That idea later led to the modern word atom. In the 19th century, John Dalton developed an atomic theory that is still largely correct today. He proposed five key ideas. All matter is made of tiny particles called atoms. Atoms of the same element are alike, and atoms of different elements are...

chemical symbols

Chemical Symbols and Element Names

Chemical symbols are short abbreviations that stand for an element or a single atom of that element. Mercury, for example, has the symbol Hg. The same symbol can point to one atom of mercury in the microscopic domain or to a sample labeled as many atoms of mercury in the macroscopic domain. Many symbols come from the element’s common name. Others are shortened from a name in another language. Most chemical symbols use one or two letters. For a few elements with atomic numbers above 112,...

atomic number and mass number

Atomic Identity, Mass, and Isotopes

Atomic identity depends on the number of protons in the nucleus, and mass depends on protons and neutrons together. The number of protons is the atomic number, or Z. It defines the element. For example, any atom with six protons is carbon, no matter how many neutrons or electrons it has. In a neutral atom, the number of protons equals the number of electrons. Because of that, the atomic number also tells you the number of electrons in the atom. The total number of protons and neutrons is...

atomic weight

Atomic Mass and Mole Calculations

Atomic mass and mole calculations help explain how much matter is in atoms and compounds. Protons and neutrons have about the same mass, about 1.67 × 10 -24 grams. Scientists define that mass as one atomic mass unit, or amu, also called one Dalton. Electrons are much lighter than protons. They weigh only 9.11 × 10 -28 grams, or about 1/1800 of an atomic mass unit. Because of that small mass, electrons do not add much to an element’s overall atomic mass. When chemists calculate atomic mass,...

isotopes and radioisotopes

Radioisotopes in Medicine and Imaging

Radioisotopes are unstable isotopes that can be used to study the body and treat disease. An isotope is an atom of the same element that has a different mass because it contains a different number of neutrons. It still has the same number of protons, so it remains chemically identical. English chemist Frederick Soddy explained this idea in the early 1900s and later received the Nobel Prize in Chemistry in 1921. Some isotopes have more neutrons than usual and are called heavy isotopes. These...

electron behavior

Electron Shells and Discovery

Electrons are negatively charged subatomic particles that stay near the positively charged nucleus of an atom. They occupy spaces linked to energy levels called shells. They are also arranged into subshells and orbitals within each shell. An electron’s shell shows its general energy level. Electrons closer to the nucleus have less energy, while electrons farther away have more energy. The outer shells have more space, so they can hold more electrons than the inner shells. Subshells describe...

introduction to chemical bonds

How Atoms Bond to Reach Stability

Atoms bond to become more stable, and their outermost electrons play the biggest role in that process. The inner electron shell can hold two electrons. The next two shells can each hold eight electrons. This is called the octet rule. It states that, except for the innermost shell, atoms are most stable when their valence shell, or outer shell, has eight electrons. When atoms do not have enough electrons to fill that outer shell, they form chemical bonds with other atoms. A chemical bond is the...

ionic bonds

Ionic Bonds and Charge Transfer

Ionic bonds form when atoms transfer electrons and become charged particles. A positive ion and a negative ion attract each other because opposite charges pull together. This type of bonding helps explain how some substances are held together. In many cases, an atom loses one or more electrons, while another atom gains them. The atom that loses electrons becomes a cation, which is a positively charged ion. The atom that gains electrons becomes an anion, which is a negatively charged ion. The...

covalent bonds

Polar and Nonpolar Covalent Bonds

Covalent bonds form when atoms share electrons to fill their valence shells. The way those shared electrons are pulled depends on electronegativity, which is an atom's tendency to attract electrons in a bond. That difference also helps explain why some molecules are polar and others are nonpolar. Atoms with similar electronegativities form nonpolar covalent bonds. In these bonds, electrons are shared equally, so there is no charge across the molecule. When two atoms have different...

hydrogen bonds

Hydrogen Bonding and DNA Stability

Hydrogen bonding helps explain why some molecules stick together more strongly than others. A hydrogen bond forms when a weakly positive hydrogen atom, already bonded to an electronegative atom, is attracted to another electronegative atom on a nearby polar molecule. Common examples include water, hydrogen fluoride, and ammonia. This attraction happens because hydrogen has a much lower electronegativity than atoms such as fluorine, oxygen, and nitrogen. The electronegativity difference, along...

ions, molecules, and compounds

Atomic Charges, Bonds, and Compounds

Atoms can gain or lose electrons during chemical reactions and become ions. An ion is an atom with an electrical charge. This charge is positive or negative, and it often helps the atom reach a full valence shell. Some atoms are more likely to donate electrons, while others are more likely to accept them. Potassium is one example. It has atomic number 19 and one electron in its valence shell, so it is likely to donate that electron and become a slightly positive ion called a cation. Fluorine...

Solids, liquids, gases, and plasma are the main forms of matter described here. Solids are rigid and keep a definite shape. Liquids flow and take the shape of their container, although gravity gives the surface a flat or slightly curved top. Solids and liquids also have volumes that stay nearly the same even when pressure changes. Gases behave differently from solids and liquids. A gas takes both the shape and the volume of its container. In matter with this behavior, the particles are far...

colloids and suspensions

Suspensions, Sedimentation, and Colloids

Suspensions and colloids are two common kinds of mixtures seen in everyday life. Mud and water, flour and water, and tempera paint are suspensions. These mixtures are heterogeneous, which means their particles are not spread out evenly. The particles are relatively large and can be seen with the naked eye or a magnifying glass. Suspension particles make mixtures cloudy, and they settle out after mixing. The settling of particles in a suspension is called sedimentation. A blood test can measure...

introduction to chemical reactions

Chemical Reaction Basics and Equilibrium

Chemical reactions start with reactants and end with products. Reactants are the substances that enter a reaction, and products are the new substances that form. For example, sodium and chloride ions are the reactants in the formation of table salt. Chemical reactions follow the law of conservation of mass. Matter is not created or destroyed during the reaction. That means the atoms and elements in the reactants are still present in the products, and nothing new appears in the products that...

types of chemical reactions: anabolic and catabolic

types-of-chemical-reactions-anabolic-and-catabolic

Anabolism, Catabolism, and ATP Use

Anabolism and catabolism are the two main kinds of metabolic reactions in the body. Metabolism is the total set of anabolic and catabolic reactions that keep life running. These reactions follow the first law of thermodynamics, which says energy cannot be created or destroyed. It can only change form. Anabolism builds larger, more complex molecules from smaller ones. These anabolic, or biosynthesis, reactions need energy in the form of ATP. They join monosaccharides into polysaccharides, fatty...

types of chemical reactions: exchange and reversible

types-of-chemical-reactions-exchange-and-reversible

Electron Transfer and Chemical Equilibrium

Exchange reactions and reversible reactions are two important ideas in chemistry. In an exchange reaction, synthesis and decomposition happen at the same time. Chemical bonds are both formed and broken. These reactions can absorb chemical energy, store it, and release it. A special type of exchange reaction is the oxidation-reduction reaction, or redox reaction. In a redox reaction, electrons move from one compound to another. The electrons often come from hydrogen atoms, which contain one...

energy transfer in chemical reactions

Chemical Energy and Reaction Types

Chemical reactions depend on energy transfer, chemical bonds, and the way matter collides. A reaction needs enough energy for particles to meet with the right force and precision. That energy can break old bonds and help form new ones. Kinetic energy is the energy of motion. A person lifting a brick uses kinetic energy to move the brick into place on a wall. Once the wall is built, it stores potential energy, which is the energy of position or structure. If the wall falls, that stored energy...

factors influencing the rate of chemical reactions

factors-influencing-the-rate-of-chemical-reactions

Chemical Reaction Rates and Catalysts

Chemical reaction rates depend on how often particles collide and whether those collisions have enough energy to start a reaction. That starting energy is called activation energy. Factors that affect reaction rate either lower that energy or make successful collisions more likely. Concentration and pressure can speed reactions up because they put more particles in the same space. When more particles are present, they are more likely to bump into one another. Chemists can also increase...

acids, bases and neutralization reactions

How pH Affects Cells and Digestion

Acids, bases, and pH help control how cells and body systems work. In biology, pH can strongly affect enzymes, proteins, and nucleic acids. Enzymes work best within a certain pH range, and pH changes can alter their structure or denature them, which changes how they function. Acids release hydrogen ions, or H+, in solution. A hydrogen ion is a proton, so it is very reactive in chemical reactions. Strong acids release all of their H+ in water and ionize completely. Hydrochloric acid (HCl) is a...

key terms and concepts

Explore how solids, liquids, gases, and plasma differ, plus how particle motion, intermolecular forces, and kinetic energy shape each state of matter.

Solids, Liquids, Gases, and Plasma | JoVE K12

anatomy and physiology

JoVE Core Anatomy and Physiology showcases the anatomical and physiological details of the human body in comprehensive, clear, and engaging video animations. This collection of lessons focuses on the structures, components, functions, and requirements of the human body. It is complemented by scientist-in-action videos that demonstrate the application of this knowledge in real-world medical and research settings.

Florida Department of Education

High School

Earth and Space Science

SC.912.E.5

SC.912.E.5.2

Physical Science

SC.912.P.8

SC.912.P.8.1

south-carolina-college-and-career-ready-science-standards

South Carolina College and Career Ready Science Standards

Chemistry

Matter and Its Interactions

C-PS1-1

C-PS1-3.

motion-and-stability-forces-and-interactions

Motion and Stability: Forces and Interactions

C-PS2-6.

Georgia Standards of Excellence

9-12

SPS5.

The de Broglie Wavelength

In the macroscopic world, objects that are large enough to be seen by the naked eye follow the rules of classical physics. A billiard ball moving on a ...

dual-nature-of-electromagnetic-em-radiation

Dual Nature of Electromagnetic (EM) Radiation

Electromagnetic (EM) radiation consists of electric and magnetic field components oscillating in planes perpendicular to each other and mutually ...

The student will investigate and understand that extremely large and extremely small quantities are not necessarily described by the same laws as those studied in Newtonian physics. Topics, such as these listed, may be included. wave/particle duality;

PH.9.a

The Uncertainty Principle

Werner Heisenberg considered the limits of how accurately one can measure properties of an electron or other microscopic particles. He determined that ...

The Quantum-Mechanical Model of an Atom

Shortly after de Broglie published his ideas that the electron in a hydrogen atom could be better thought of as being a circular standing wave instead of ...

Quantum Numbers

It is said that the energy of an electron in an atom is quantized; that is, it can be equal only to certain specific values and can jump from one energy ...

The student will investigate and understand that extremely large and extremely small quantities are not necessarily described by the same laws as those studied in Newtonian physics. Topics, such as these listed, may be included. quantum mechanics and uncertainty;

PH.9.b

Principle of Equivalence

According to Albert Einstein (1897-1955), free-falling and feeling weightless are intrinsically linked. If a person were in free-fall under gravity, for ...

space-time-curvature-and-the-general-theory-of-relativity

Space-Time Curvature and the General Theory of Relativity

In 1905, Albert Einstein published his special theory of relativity. According to this theory, no matter in the universe can attain a speed greater than ...

The student will investigate and understand that extremely large and extremely small quantities are not necessarily described by the same laws as those studied in Newtonian physics. Topics, such as these listed, may be included. relativity;

PH.9.c

Nuclear Stability

Protons and neutrons, collectively called nucleons, are packed together tightly in a nucleus. With a radius of about 10&#8722;15 meters, a nucleus is ...

Nuclear Binding Energy

The difference between the calculated and experimentally measured masses is known as the mass defect of the atom. In the case of helium-4, the mass defect ...

Radioactive Decay and Radiometric Dating

Radioactivity is a spontaneous disintegration of an unstable nuclide and is a random process, as all the nuclei in the sample do not decay simultaneously. ...

Nuclear Fission

Many heavier elements with smaller binding energies per nucleon can decompose into more stable elements that have intermediate mass numbers and larger ...

Nuclear Power

Controlled nuclear fission reactions are used to generate electricity. Any nuclear reactor that produces power via the fission of uranium or plutonium by ...

Nuclear Fusion

The process of converting very light nuclei into heavier nuclei is also accompanied by the conversion of mass into large amounts of energy, a process ...

The student will investigate and understand that extremely large and extremely small quantities are not necessarily described by the same laws as those studied in Newtonian physics. Topics, such as these listed, may be included. nuclear physics;

PH.9.d

Molecular and Ionic 
Solids

Crystalline solids are divided into four types: molecular, ionic, metallic, and covalent network based on the type of constituent units and their ...

Metallic Solids

Metallic solids such as crystals of copper, aluminum, and iron are formed by metal atoms. The structure of metallic crystals is often described as a ...

Network Covalent Solids

Network covalent solids contain a three-dimensional network of covalently bonded atoms as found in the crystal structures of nonmetals like diamond, ...

physical-and-chemical-properties-of-matter

Physical and Chemical Properties of Matter

The characteristics that enable us to distinguish one substance from another are called properties.

Physical Properties of Matter

A physical property is ...

molecular-comparison-of-gases-liquids-and-solids

Molecular Comparison of Gases, Liquids, and Solids

Particles in a solid are tightly packed together (fixed shape) and often arranged in a regular pattern; in a liquid, they are close together with no ...

comparing-intermolecular-forces-melting-point-boiling-point

Comparing Intermolecular Forces: Melting Point, Boiling Point, and Miscibility

Intermolecular forces are attractive forces that exist between molecules. They dictate several bulk properties, such as melting points, boiling points, ...

Structures of Solids

Solids in which the atoms, ions, or molecules are arranged in a definite repeating pattern are known as crystalline solids. Metals and ionic compounds ...

lattice-centering-and-coordination-number

Lattice Centering and Coordination Number

The structure of a crystalline solid, whether a metal or not, is best described by considering its simplest repeating unit, which is referred to as its ...

Ionic Crystal Structures

Ionic crystals consist of two or more different kinds of ions that usually have different sizes. The packing of these ions into a crystal structure is ...

Chemical Bonds


Atoms participate in a chemical bond formation&#160;to acquire a completed valence-shell electron configuration similar to that of the noble gas nearest ...

Covalent Bonds

When two atoms share electrons to complete their valence shells they create a covalent bond. An atom&#x2019;s electronegativity&#x2014;the force with ...

Ionic Bonds

When atoms gain or lose electrons to achieve a more stable electron configuration they form ions. Ionic bonds are electrostatic attractions between ions ...

Hydrogen Bonds

Hydrogen BondsHydrogen bonds are weak attractions between atoms that have formed other chemical bonds. One of these atoms is electronegative, like oxygen, ...

Van der Waals Interactions

Atoms and molecules interact with each other through intermolecular forces. These electrostatic forces arise from attractive or repulsive interactions ...

Lewis Symbols and the Octet Rule

Chemical bonds are complex interactions between two or more atoms or ions, which reduce the potential energy of the molecule. Gilbert N. Lewis developed a ...

Ionic Bonding and Electron Transfer

Ions are atoms or molecules bearing an electrical charge. A cation (a positive ion) forms when a neutral atom loses one or more electrons from its valence ...

The Born-Haber Cycle

Lattice Energy&#xA0;

An ionic compound is stable because of the electrostatic attraction between its positive and negative ions. The lattice energy of a ...

trends-in-lattice-energy-ion-size-and-charge

Trends in Lattice Energy: Ion Size and Charge

An ionic compound is stable because of the electrostatic attraction between its positive and negative ions. The lattice energy of a compound is a measure ...

Covalent Bonding and Lewis Structures

Compared to ionic bonds, which results from the transfer of electrons between metallic and nonmetallic atoms, covalent bonds result from the mutual ...

Electronegativity

Whether a bond is nonpolar or polar covalent is determined by a property of the bonding atoms called electronegativity.&#xA0;

Electronegativity values of ...

bond-polarity-dipole-moment-and-percent-ionic-character

Bond Polarity, Dipole Moment, and Percent Ionic Character

Bond Polarity

The absolute value of the difference in electronegativity (&Delta;EN) of two bonded atoms provides a rough measure of the polarity to be ...

lewis-structures-of-molecular-compounds-and-polyatomic-ions

Lewis Structures of Molecular Compounds and Polyatomic Ions

To draw Lewis structures for complicated molecules and molecular ions, it is helpful to follow a step-by-step procedure as outlined:


	Determine the ...

Resonance

The Lewis structure of a nitrite anion (NO2&minus;) may actually be drawn in two different ways, distinguished by the locations of the N-O and N=O ...

Formal Charges

In some cases, there are seemingly more than one valid Lewis structures for molecules and polyatomic ions. The concept of formal charges can be used to ...

The student will investigate and understand that extremely large and extremely small quantities are not necessarily described by the same laws as those studied in Newtonian physics. Topics, such as these listed, may be included. solid state physics;

The student will investigate and understand that extremely large and extremely small quantities are not necessarily described by the same laws as those studied in Newtonian physics. Topics, such as these listed, may be included.

Solids, Liquids, Gases, and Plasma

Description

Transcript

Tags

More videos by Standards