Source : Laboratoire de Alan Lester – Université du Colorado Boulder
Les propriétés physiques des minéraux comprennent divers attributs mesurables et perceptibles, y compris la couleur, la strie, propriétés magnétiques, dureté, forme de croissance cristalline et clivage de cristal. Chacune de ces propriétés sont minérales spécifiques, et elles sont fondamentalement liées à d’un minéral particulier composition chimique et structure atomique.
Cette expérience porte sur deux propriétés qui en découlent principalement de répétition symétrique de groupements atomiques fondamentales, structurels, appelées cellules d’unité, au sein d’un réseau cristallin, une forme de croissance cristalline et clivage de cristal.
Forme de croissance cristalline est l’expression macroscopique de symétrie au niveau atomique, générée par le processus de croissance naturelle de l’ajout de cellules (les composantes moléculaires de minéraux) pour un réseau cristallin croissant. Zones d’unité-cellule-addition rapide deviennent les bords entre les surfaces planes, c’est-à-dire des visages, du cristal.
Il est important de reconnaître que les roches sont des regroupements de grains minéraux. La plupart des roches sont polyminérales (plusieurs sortes de grains minéraux), mais certains sont effectivement monominéraliques (composé d’un seul minéral). Étant donné que les roches sont des combinaisons des minéraux, roches ne sont pas dénommés ayant la forme cristalline. Dans certains cas, les géologues se référer aux rochers comme ayant un clivage général, mais ici, le terme est simplement utilisé pour faire référence à rupture répétitive des surfaces et n’est pas le reflet de la structure cristalline atomique. Donc, en général, le clivage de forme et de cristal de cristal termes sont utilisés en référence à des échantillons de minéraux et pas des échantillons de roche.
Tous les minéraux possèdent des propriétés physiques, mais les caractéristiques spécifiques et facilement reconnaissables, associées aux propriétés ne sont pas toujours exprimées dans un cristal individuel. Par exemple, les cristaux de quartz ont une forme hexagonale caractéristique, mais en cas de croissance cristalline dans un environnement où les autres minéraux bloque ou affecter la forme de croissance naturelle (qui est généralement le cas dans la plupart des roches) puis la forme hexagonale ne se forme pas. Donc, dans cette optique, il est important de choisir soigneusement un groupe approprié d’échantillons pour la croissance des cristaux ou analyse de cristal de clivage, que pas tous les échantillons montrent ces principales caractéristiques.
En outre, bien que le clivage cristal est relativement facile de tester — en cassant un échantillon avec un marteau — minéraux différents apportent une gamme de qualité de clivage, tels que les surfaces planes, générées par la rupture peuvent être déchiquetés et rugueux (appelés « pauvres-clivage ») ou très lisses (appelée « bon- » ou « excellent clivage »). Dans certains cas (par exemple le quartz), forces de liaison cristallographiques sont uniformes dans tous les sens, et cela se traduit par un minéral à l’absence de plans de clivage reconnaissable.
Historically, evaluating the physical properties of minerals has been a key first step in mineral identification. Even today, when lacking microscopic and modern analytical instrumentation (e.g. petrographic microscopy, x-ray diffraction, x-ray fluorescence, and electron microprobe techniques), observed physical properties are still quite useful as diagnostic tools for mineral identification. This is particularly the case in field geologic studies.
Evaluating and observing the physical properties of minerals is an excellent means to demonstrate the critical dependence of macroscopic features on atomic-level structure and arrangement.
The key physical properties of minerals are not always expressed in specific samples. Therefore, actually being able to recognize and use these properties as diagnostic tools requires a combination of science, experience, and craft. Often, the geologist must utilize a hand lens to evaluate relatively small mineral crystals or grains within the matrix of a larger rock. In such cases, it can become a distinct challenge to identify the useful aspects of crystal form and crystal cleavage.
In an academic or teaching setting, the evaluation of minerals via hand sample analysis is an exercise that demonstrates how repetitive patterns and characteristics are imposed by the physical chemistry of natural materials. In other words, for any specific mineral, there are certain crystallographic features (e.g. crystal morphology) and physical properties (e.g. color, hardness, streak) that are imposed by chemical composition and atomic structure.
In the realm of mineral resources and exploration geology, the identification of minerals via hand sample is a key component of fieldwork, aimed at locating potential ores and economically useful deposits. For example, the identification of various metal sulfides (pyrite, sphalerite, galena) in association with hydrothermal iron oxy-hydroxides (hematite, goethite, limonite) can be indicative of potential Au- and Ag-rich veins and regions.
In the context of historical geology (deciphering the deep temporal history of a region), mineral identification can set the stage for interpretations of ancient conditions. For example, certain metamorphic minerals (e.g. the Al2SiO5 polymorphs, kyanite, andalusite, and sillimanite) are markers of particular pressure and temperature conditions in the ancient crust.
Minerals are inorganic substances found in the Earth, with unique properties that aid in identification and analysis.
Many minerals exhibit crystalline structure. These crystalline materials have highly ordered atomic arrangements, made up of repeating atomic groupings, called unit cells. Because unit cells are identical within a crystal, they are responsible for the symmetry of the crystal on the micro- and macro-scale.
This symmetry causes mineral crystals to break, or cleave, in a predictable way. Cleavage is the tendency of a crystal to break along weak structural planes. Thus, the way a mineral cleaves provides insight into its crystal structure.
This video will demonstrate the analysis of macro-scale mineral crystal forms by breaking mineral samples and observing their cleavage.
Crystalline solids contain atoms organized in a repeated pattern, whereas amorphous solids have no order. For example, carbon can be found in many forms. The atoms in amorphous carbon are randomly organized, whereas the atoms in diamond are arranged in an ordered crystal.
A crystal is an array of repeating, identical unit cells, which are defined by the length of the unit cell edges and the angles between them. These repeated structures extend infinitely in three spatial directions, and define the uniformity and properties of the crystal.
There are seven basic unit cells. The simplest unit cell, the cube, has equal edge lengths, and an atom at each corner. Variations include tetragonal and orthorhombic, which possess different edge lengths.
Rhombohedral crystal structures possess similar parallel face geometry without right angles. Monoclinic and triclinic are similar in shape, but with varied angles and edge lengths. Finally, the hexagonal structure is composed of two parallel hexagonal faces, with six rectangular faces.
Variations in these structures arise when additional atoms are contained in the crystal face, called face-centered, or in the crystal body, called body centered.
When crystals are broken, they tend to cleave along structurally weak crystal planes. The cleavage quality depends on the strength of the bonds in and across the plane. Good cleavage occurs when the strength of the bonds within the place are stronger than those across the plane. Poor cleavage can occur when the bond strength is strong across the crystal plane. Crystals may cleave in one direction, called basal cleavage, resulting in two cleaved faces. This results from strong atomic bonds within the plane, but weak bonds between the planes.
Similarly, crystals may cleave in two directions, due to two weak planes, resulting in four cleaved faces and two fractured faces. Cubic and rhombohedral forms result from cleavage in three directions. Octahedral and dodecahedral forms arise from four and six fracture planes, respectively.
Some minerals don’t cleave along a crystal plane at all, due to strong bonds in all directions, and instead result in irregular fracture.
Now that we’ve covered the basics of crystal structure, and the different types of crystal cleavage, let’s look at these properties in real mineral samples.
To analyze crystal forms, first collect a group of mineral samples, such as quartz, halite, calcite, garnet, biotite, and muscovite.
Place the sample on the observation surface. Rotate the sample in order to observe all sides. Look for crystal faces, crystal edges, and crystal vertices.
Where possible, measure the interfacial angles using a goniometer. To do so, lay one side of the goniometer on a particular crystal face, and the other side of the goniometer on an adjoining face. Then read the angle.
Compare the observations to the set of characteristic crystalline polyhedra. Repeat these steps for other minerals, and note the differences.
Quartz samples have a hexagonal dipyramidal crystal form, as indicated by the 6 sides.
The calcite material, exhibits scalenohedron form, as shown by the 8 faces of the twinned pyramid structure.
Halite, shows characteristic cubic structure, with 90° angles.
Garnet has angled surfaces with 12 sides, indicative of its dodecahedron form.
Finally, biotite can show an apparent hexagonal form.
Next, to observe crystal cleavage, first put on eye protection.
Place a piece of quartz on the breaking surface. Using a hammer, break the piece of quartz. Using a hand lens, observe the broken piece of quartz for cleavage surfaces. Notice that quartz has none.
The unit cells in the quartz crystal lattice have comparably equal bond strengths in all directions, resulting in a crystal with no preferred breaking planes, called conchoidal fracture.
Next, repeat this breaking step for other specimens. Use a hand lens to evaluate different cleavage qualities.
When there is a dramatic difference in bond strengths in a particular orientation, such as between sheets of silicate groupings in the case of mica, a nearly perfect cleavage is generated between these sheets, called basal cleavage.
Biotite and muscovite each display basal cleavage, with a single break plane.
Halite displays cubic cleavage, resulting from three cleavage planes at 90°.
Calcite displays rhombohedral cleavage, resulting from three cleavage planes at 120 and 60°.
The analysis of crystal structure is important to understanding the types of minerals found in the field.
The quantitative analysis of crystal structure can be performed using X-ray diffraction, or XRD.
In this example, the crystal structure of an iron oxide was synthesized from a mixture of hematite and iron at high temperature and pressure in a diamond anvil cell. The XRD scattering pattern was analyzed throughout the reaction to determine the crystal structure.
The results showed smooth or spotty Debye rings, which indicate crystallinity. The location of each ring elucidates the crystal structure, as each ring corresponds to a crystal plane.
Due to its planar cleavage property, and therefore atomically flat surface, mica is frequently used as a substrate for small molecule imaging.
In this example, mica was used as a substrate for the imaging of photoreceptor molecules using atomic force microscopy, or AFM. The protein sample was adsorbed to a freshly cleaved mica sheet, and then rinsed with buffer.
The sample was then imaged using a fluid cell. The mica substrate enabled high resolution imaging of the protein sample due to its atomically flat surface.
You’ve just watched JoVE’s introduction to physical properties of minerals. You should now understand the basics of crystal unit cells, and how to determine crystal cleavage planes. Thanks for watching!
