在这项工作中,我们描述了使用的原子探针层析成像技术研究中的CIGS型太阳能电池的吸收层的晶粒边界。这里也提出一种新颖的方法来准备包含所需的晶界结构与已知的原子探针提示。
与已有技术相比,原子探针断层扫描是一个独特的技术,能够在纳米级,并在三维空间中的化学特性的内部接口。事实上,APT具有高灵敏度(ppm级)和高空间分辨率(子纳米)。
在这里做了相当大的努力准备包含所需的晶界结构与已知的APT尖。事实上,特定于站点的样品制备使用聚焦离子束,电子背散射衍射和透射电子显微镜相结合,提出了这项工作。这种方法允许选择晶界已知的结构和位置,铜(铟,镓)硒薄膜薄膜加以研究,原子探针断层扫描。
最后,我们讨论了使用原子探针断层扫描技术来研究晶界(铜铟,镓)硒薄膜太阳能电池的优点和缺点。
超过二十年的,因为他们的效率高,抗辐射,长期稳定,一直在开发基于铜矿结构的化合物半导体沉积Cu(In,Ga)的硒(CIGS)作为吸收材料的薄膜太阳能电池性能和低的生产成本1-3。可以制造这些太阳能电池中,只有很少的材料消耗,由于CIGS吸收层的良好的光学性能,即,直接带隙和高吸收系数1,2。足以产生高的光吸收体膜的厚度只有几微米。由于电极的光生电荷载流子的扩散路径比较短,CIGS吸收体,可以以多晶形式。铜的最大效率(铟,镓)硒(CIGS)太阳能电池迄今取得的20.4%,这是所有薄膜太阳能电池中的最高值。
ove_content“>为进一步建立的CIGS薄膜光伏技术,既降低生产成本和提高太阳能电池的效率是必不可少的,后者是强烈地依赖于CIGS吸收层的微观结构和化学组成的内部接口,在吸收塔内的特定的晶界(GBS),发挥了举足轻重的作用,因为它们可能影响运输的光生载流子。CIGS太阳能电池方面尚未解决的主要问题之一是的良性性质CIGS GBS, 即多晶的CIGS吸收薄膜产量优秀的电池效率,尽管高密度的晶界和晶格缺陷。
几位作者研究金紫荆星章CIGS薄膜太阳能级就其电学性能5,6,性格和取向差7-9以及杂质分离10-13。但是,没有明确的联系这些properti之间ES可以成立至今。特别是,有相当大的缺乏有关本地的化学组成和晶界的杂质含量。
在过去的二十年中,原子探针断层扫描(APT)已成为一个有前途的纳米分析技术14-17。直到最近,APT的太阳能电池的研究已经在很大程度上限制在样品制备过程中的困难,并使用传统的脉冲电压的原子探针分析半导体材料的能力有限。这些限制已经在很大程度上克服的发展“升出法的基础上,聚焦离子束(FIB)铣18台 ,并引进脉冲激光APT 16。已经发表了多篇论文关于APT表征CIGS太阳能电池19-23,这是大力鼓励作进一步调查。
本文给出了如何学习内部I指引nterfaces在铜铟镓硒薄膜太阳能电池由原子探针层析成像技术。
在当前的工作中,我们提出了铜铟镓硒的随机HAGB中,化合物半导体材料,用于光伏应用APT结果。此外,我们还表明,APT结合互补的技术,如EBSD和TEM是一个功能强大的工具来阐明的CIGS太阳能电池的结构组成性能关系。不幸的是,APT和EDX / EELS在TEM之间的相关性是不可能的,因为首先,EDX / EELS有没有足够的分辨率来检测低Na和O浓度晶界其次,EDX / EELS是不敏感的所有元素,尤其是娜和O
<p class="jove_c…The authors have nothing to disclose.
这项工作是由德国研究基金会(DFG)(CH 943/2-1合同)成立。笔者想感谢沃尔夫冈迪图斯和斯特凡Paetel的Zentrum酒店献给Sonnenenergie和Wasserstoff-Forschung巴登 – 符腾堡州准备对这项工作的CIGS吸收层。