Uv-activated Adhesive Chamber
Uv-activated Adhesive Chamber - Related Videos
12:42
Human Neutrophil Flow Chamber Adhesion Assay
0 Views •
Cited by 11 •
2014
A method of quantitating neutrophil adhesion is reported. This method creates a dynamic flow environment similar to that encountered in a blood vessel. It allows the investigation of neutrophil adhesion to either purified adhesion molecules (ligand) or endothelial cell substrate (HUVEC) in a context similar to the in vivo environment with sheer stress.
03:10
Micro-Parallel Plate Flow Chamber Model for Studying Bacterial Adhesion to Human Endothelial Cells
0 Views •
2026
Source: Claes, J., et al, In Vitro and In Vivo Model to Study Bacterial Adhesion to the Vessel Wall Under Flow Conditions. J. Vis. Exp. (2015).This video demonstrates a method for studying host-pathogen interactions using a micro-parallel plate flow chamber seeded with human primary endothelial cells. Following endothelial cell activation by an ionophore and perfusion with fluorescently labeled bacteria, the cells release von Willebrand factor (VWF), which binds bacterial adhesins under shear...
09:14
Static Adhesion Assay for the Study of Integrin Activation in T Lymphocytes
0 Views •
Cited by 21 •
2014
Static adhesion assay is a powerful tool that can be used to model the interactions between T lymphocytes and other cell types. Interactions are generated by injecting labeled T cells into wells coated with adhesion molecules, while a plate reader is used to quantify the number of adherent cells following serial washes.
07:40
Assay of Adhesion Under Shear Stress for the Study of T Lymphocyte-Adhesion Molecule Interactions
0 Views •
Cited by 3 •
2016
This flow adhesion assay provides a simple, high impact model of T cell-epithelial cell interactions. A syringe pump is used to generate shear stress, and confocal microscopy captures images for quantification. The goal of these studies is to effectively quantify T cell adhesion using flow conditions.
06:32
A Chitosan Based, Laser Activated Thin Film Surgical Adhesive, 'SurgiLux': Preparation and Demonstration
0 Views •
Cited by 33 •
2012
The fabrication of a novel, flexible thin film surgical adhesive from FDA approved ingredients, chitosan and indocyanine green is described. Bonding of this adhesive to collagenous tissue through a simple activation process with a low-powered infra-red laser is demonstrated.
FAQs
Ultraviolet exposure converts the adhesive from a workable material into a solid structure that secures the chamber components. This timing allows the enclosure to be positioned before fixation occurs, rather than requiring the assembly to be rigid from the beginning. The result is a sealed space whose geometry can be established around the biological sample or reagent.
Localized curing allows fixation to occur where the chamber is being assembled while limiting unnecessary disturbance to nearby sample regions. The rapid transition from workable adhesive to a secured structure can help preserve the intended arrangement of delicate specimens or reagents. This supports more consistent preparation when the experiment depends on a defined sample area.
A sealed chamber establishes a defined internal environment around the specimen or reagent. That enclosure can support containment and controlled access during handling or observation, while keeping the experimental space organized for microscopy or surface-based assays. By standardizing the area in which the sample is examined, the chamber can contribute to reproducible preparation and analysis.
Its value comes from combining workable assembly with rapid, localized fixation. Researchers can arrange chamber components around a biological sample or reagent, then secure that arrangement after the desired configuration is established. This combination is relevant when experiments require a sealed space, access to a defined specimen region, or observation with limited disturbance during preparation.
Assembly begins by arranging the chamber components around the biological sample or reagent while the adhesive remains workable. Once the intended enclosure and sample position are established, ultraviolet light is applied to cure the adhesive and secure the components. The completed chamber can then provide the sealed space needed for handling, observation, or an assay.
Preparation requires chamber components, a light-curable adhesive, and an ultraviolet light source for fixation. The biological material may be a specimen or reagent intended for handling, microscopy, or a surface-based assay. Together, these elements allow researchers to form the enclosure, cure it after positioning, and maintain a defined internal space for the experiment.
Researchers may choose it when a study requires sample containment, microscopy, surface-based assays, or another setup with controlled access to a specimen or reagent. The approach is especially relevant when rapid fabrication and reduced disturbance during preparation matter. Its sealed configuration can support consistent handling and analysis across experiments using a defined sample space.
The chambers can provide a secured, defined internal environment for biological samples or reagents and support direct observation or surface-based analysis. Their rapid curing can simplify device fabrication, while the localized fixation may reduce disruption during preparation. These features can improve the reproducibility of sample setup and help maintain a consistent configuration for subsequent analysis.