Back to chapter

7.4:

Foto-elektrisch Effect

JoVE Core
Chemistry
A subscription to JoVE is required to view this content.  Sign in or start your free trial.
JoVE Core Chemistry
Photoelectric Effect

Languages

Share

Wanneer licht van een bepaalde golflengte en frequentie een metaal raakt, worden elektronen uit het metaal geworpen. Dit fenomeen staat bekend als het foto-elektrisch effect. Alleen licht boven een drempelfrequentie kan echter elektronen uit het metaal werpen.Licht met een lagere frequentie werpt geen elektronen uit ongeacht de intensiteit. Hoe komt dit? Albert Einstein stelde voor dat licht zich gedraagt als een stroom deeltjes of kleine pakketjes.Een pakket of quantum licht wordt een foton genoemd. Elk foton heeft een energie, E, die afhangt van zijn frequentie, nu. De twee zijn gerelateerd door deze vergelijking, waarbij h de constante van Planck is en een waarde heeft van 6, 626 maal 10 tot de negatieve 34 joule-seconden.Licht, en dus fotonen, met een hogere frequentie hebben meer energie. Een elektron is gebonden aan een metaal met een bindingsenergie, phi. Dit staat ook bekend als de werkfunctie van het metaal, W.Er is dus een hoeveelheid energie groter dan W nodig om de aantrekkingskrachten te overwinnen en het elektron vrij te maken.Wanneer een foton met een energie groter dan W het metaal raakt, wordt zijn overtollige energie als kinetische energie overgedragen op het elektron en wordt het elektron uitgeworpen. Om het foto-elektrische effect samen te vatten, laagfrequent licht met een lange golflengte werpt geen elektronen uit het metaal. Door de intensiteit van laagfrequent licht te verhogen, neemt het aantal fotonen alleen maar toe.Elk foton heeft nog steeds dezelfde energie, wat niet genoeg is om elektronen vrij te maken. Licht met een kortere golflengte met een frequentie die hoger is dan de drempelfrequentie, werpt elektronen uit omdat elk foton een hogere energie heeft. Naarmate de frequentie van licht toeneemt, neemt ook de energie van het foton toe, en dus de kinetische energie van het uitgeworpen elektron.Hoe groter de intensiteit van het licht, hoe meer fotonen het metaal raken en hoe groter het aantal elektronen dat wordt uitgeworpen. Het foto-elektrische effect toont het deeltjesgedrag van licht aan.

7.4:

Foto-elektrisch Effect

When light of a particular wavelength strikes a metal surface, electrons are emitted. This is called the photoelectric effect. The minimum frequency of light that can cause such emission of electrons is called the threshold frequency, which is specific to the metal. Light with a frequency lower than the threshold frequency, even if it is of high intensity, cannot initiate the emission of electrons. However, when the frequency is higher than the threshold value, the number of electrons ejected is directly proportional to the intensity of the beam.

According to classical wave theory, a wave's energy depends on its intensity (which depends on its amplitude), not its frequency. One part of these observations was that the number of electrons ejected within a given time period was seen to increase as the brightness increased. In 1905, Albert Einstein was able to resolve the paradox by incorporating Planck's quantization findings into the discredited particle view of light.

Einstein argued that the quantized energies that Planck had postulated could be applied to the light in the photoelectric effect. The light striking the metal surface should not be viewed as a wave, but should instead be viewed as a stream of particles (later called photons) whose energy depended on their frequency, The amount of energy (E) in a light packet depends on its frequency (ν) according to the following equation:

Eq1

where h is Planck’s constant.

The photoelectric effect can be described by assuming that the light is quantized. A certain minimum energy is required to overcome the binding energy (Φ) experienced by an electron. This is also known as the work function (W) of the metal.

Since the electrons in the metal had a certain amount of binding energy keeping them there, the incident light needs to have more energy to free the electrons. Photons of low-frequency light do not contain enough energy to eject electrons from the metal. Even if the metal is exposed to such light for a long time, no emission of electrons is observed. An electron can only be emitted when a photon with energy greater than the work function strikes the metal.

Eq1

The excess energy of the photon is converted into kinetic energy of the emitted electron.

Eq1

Therefore, electrons are ejected when they are hit by photons having sufficient energy (a frequency greater than the threshold). The greater the frequency of incident light, the greater the kinetic energy imparted by the collisions to the escaping electrons. Einstein also argued that the light intensity did not depend on the amplitude of the incoming wave, but instead corresponded to the number of photons striking the surface within a given time period. The number of ejected electrons increases with brightness. The greater the number of incoming photons, the more likely that they will collide with some of the electrons.

The photoelectric effect strongly suggests the particle behavior of light. Einstein won the Nobel Prize in Physics in 1921 for his explanation of the photoelectric effect. Although many light phenomena could be explained either in terms of waves or particles, certain phenomena, such as the interference patterns obtained when light passed through a double slit, were completely contrary to a particle view of light, while other phenomena, such as the photoelectric effect, were completely contrary to a wave view of light. Somehow, at a deep fundamental level still not fully understood, light is both wavelike and particle-like. This is known as wave-particle duality.

This text is adapted from Openstax, Chemistry 2e, Section 6.1: Electromagnetic Energy.