Journal
/
Engineering
/
3D Printing – Evaluating Particle Emissions of a 3D Printing Pen
JoVE Journal
Engineering
This content is Free Access.
JoVE Journal Engineering
3D Printing – Evaluating Particle Emissions of a 3D Printing Pen

3D Printing – Evaluating Particle Emissions of a 3D Printing Pen

DOI:
10.3791/61829-v

•

06:44 min

•

October 09, 2020

•

, , , , ,
1Department of Chemical and Product Safety,German Federal Institute for Risk Assessment (BfR), 2Department of Biological Safety,German Federal Institute for Risk Assessment (BfR)

Chapters

  • 00:04Introduction
  • 00:37Protocol Setup
  • 01:233D Pen Aerosol Emission Measurement Setup
  • 02:103D Pen Aerosol Emission Measurement
  • 03:21Metal Content Quantification
  • 04:31Results: Representative Particle Size and Geometric Mean Diameter Distribution and Sample Imaging
  • 06:06Conclusion

Summary

Automatic Translation

Automatic Translation

This protocol presents a method to analyze the emission of 3D printing pens. Particle concentration and particle size distribution of the released particle is measured. Released particles are further analyzed with transmission electron microscopy (TEM). Metal content in filaments is quantified by inductively coupled plasma mass spectrometry (ICP-MS).

Tags

Keywords: 3D Printing3D PenParticle EmissionsAerosol EmissionsAir QualityCharacterizationSMPSCPCHEPA FilterParticle Size DistributionBreathing ZoneEmission MeasurementAir InletDesiccatorFilamentTemperaturePrinting Process

Article

Embed

ADD TO PLAYLIST

Usage Statistics

Related Videos

check_url/61829?article_type=v

Micro 3D Printing Using a Digital Projector and its Application in the Study of Soft Materials Mechanics
check_url/61829?article_type=v

High-resolution, High-speed, Three-dimensional Video Imaging with Digital Fringe Projection Techniques
check_url/61829?article_type=v

Printing Fabrication of Bulk Heterojunction Solar Cells and In Situ Morphology Characterization
check_url/61829?article_type=v

Digital Printing of Titanium Dioxide for Dye Sensitized Solar Cells
check_url/61829?article_type=v

Challenges in Rheological Characterization of Highly Concentrated Suspensions — A Case Study for Screen-printing Silver Pastes
check_url/61829?article_type=v

3D Printing of Biomolecular Models for Research and Pedagogy
check_url/61829?article_type=v

Multi-material Ceramic-Based Components – Additive Manufacturing of Black-and-white Zirconia Components by Thermoplastic 3D-Printing (CerAM – T3DP)
check_url/61829?article_type=v

Scalable Stamp Printing and Fabrication of Hemiwicking Surfaces
check_url/61829?article_type=v

Hybrid Printing for the Fabrication of Smart Sensors
check_url/61829?article_type=v

Multimodal 3D Printing of Phantoms to Simulate Biological Tissue

Read Article