Pulmonary epithelial cells can be isolated from the respiratory tract of mice and cultured at air-liquid interface as a model of differentiated respiratory epithelium. A protocol is described for isolating, culturing and exposing these cells to mainstream cigarette smoke, in order to study molecular responses to this environmental toxin.
Date Published: 2/21/2011, Issue 48; doi: 10.3791/2513
Keywords: Medicine, Issue 48, Air-Liquid Interface, Cell isolation, Cigarette smoke, Epithelial cells
Lam, H. C., Choi, A. M., Ryter, S. W. Isolation of Mouse Respiratory Epithelial Cells and Exposure to Experimental Cigarette Smoke at Air Liquid Interface . J. Vis. Exp. (48), e2513, doi:10.3791/2513 (2011).
Pulmonary epithelial cells can be isolated from the respiratory tract of mice and cultured at air-liquid interface (ALI) as a model of differentiated respiratory epithelium. A protocol is described for isolating and exposing these cells to mainstream cigarette smoke (CS), in order to study epithelial cell responses to CS exposure. The protocol consists of three parts: the isolation of airway epithelial cells from mouse trachea, the culturing of these cells at air-liquid interface (ALI) as fully differentiated epithelial cells, and the delivery of calibrated mainstream CS to these cells in culture. The ALI culture system allows the culture of respiratory epithelia under conditions that more closely resemble their physiological setting than ordinary liquid culture systems. The study of molecular and lung cellular responses to CS exposure is a critical component of understanding the impact of environmental air pollution on human health. Research findings in this area may ultimately contribute towards understanding the etiology of chronic obstructive pulmonary disease (COPD), and other tobacco-related diseases, which represent major global health problems.
The overall protocol requires 2 days for cell isolations from animal tissue, 5-10 days for cell proliferation, and an additional 10-14 days for cell differentiation at air-liquid interface. An additional day is required for cell exposures and harvesting of samples.
1. Isolation of Mouse Tracheobronchial Epithelial Cells (MTEC).
Note: All procedures described below have been reviewed and approved by the Institutional Animal Care and Use Committee at Brigham and Women's Hospital/ Harvard Medical School Area.
Before getting started:
- Prepare Ham's F12 Media containing antibiotics. To 250 mL Ham's F12 basal media (Cellgro) add 2.50 mL of a 100 X Penicillin/Streptomycin (102 U/mL-102 mg/mL) solution and 250 μL of a 1000 X Fungizone solution. Store at 4°C for up to 4 weeks.
- Prepare a solution of 0.15% Pronase. Add 15 mg Pronase to 10 mL of Ham's F12 Media containing antibiotics. Make fresh and keep on ice until use.
- Prepare a clean work surface and sterile surgical instruments appropriate for small animal surgery, and a lamellar tissue culture hood for cell isolations. All other equipment is considered standard for animal cell culture including humidified CO2 incubators, cold room, tabletop cell centrifuges, inverted microscope, and disposable plastic pipette and culture ware.
- Prepare collagen I solution (50 μg/mL in 0.02 N acetic acid). Pipette 1.0 mL collagen solution into each well of a 12 well transwell plate (Corning). Wrap in parafilm and let stand overnight on a flat surface at room temperature.
- Using a commercially-available mouse strain (i.e., C57Bl/6, male 6-8 weeks old), euthanize mice using an approved method of euthanasia such as CO2-induced narcosis. Typically 6 mice will yield enough cells (1.5-2.0 x 105 cells/mouse) to seed a 12-well transwell plate.
- Spray the animal carcasses with 70% EtOH solution to sterilize the field.
- With clean surgical scissors and scalpel, remove the skin around the tracheal area, and expose the trachea. Open the abdomen, cut along the sternum, and remove the rib cage. Remove tissue until the end of the trachea is exposed.
- Place tracheas into a 50 mL conical tube containing 30 mL Ham's F12 media containing antibiotics, on ice.
- In a sterile lamellar flow hood, transfer tracheal tissue to a sterile 100 mm Petri dish containing 10 mL Ham's F12 media containing antibiotics.
- Gently dissect connective tissue with sterile forceps and surgical scissors.
- Transfer tracheal tissue to a new 100 mm Petri dish containing 10 mL Ham's F12 media containing antibiotics to rinse. Cut tracheas along vertical axis to expose lumen.
- Transfer tracheas to a 50 mL tube containing 10 mL 0.15% Pronase solution and incubate overnight at 4°C.
- On the second day, have ready:
- Prepare a DNAse I solution. To 18 mL of Ham's F12 Media containing antibiotics add 2 mL of a 10 mg/mL Bovine Serum Albumin (BSA) stock solution, and 10 mg of crude pancreatic DNAse I. Make 1 mL aliquots and store at -20°C (thawed on ice before use).
- Prepare Ham's F12 media containing antibiotics with 20% fetal bovine serum (FBS). To 200 mL Ham's F12 basal media (Invitrogen) add 50 mL heat inactivated FBS, 2.5 mL of a 100 X Penicillin/Streptomycin (102 U/mL-102 mg/mL) solution, and 250 μL of a 1000 X Fungizone solution.
- Prepare MTEC Basic Medium containing antibiotics. To 475.5 mL DMEM/F12 basic media (Cellgro) add 7.5 mL 1 M HEPES solution, 10 mL of 200 mM glutamine solution, 2 mL of a 7.5% NaHCO3 solution, 5 mL of a 100 X penicillin/streptomycin solution, 500 μL of a 1000 X Fungizone solution
- Prepare MTEC medium/10% FBS. To 45 mL of MTEC basic medium containing antibiotics, add 5 mL heat inactivated FBS.
- Gently rock the tube (from Step 1.8) 10-12 times, and then let it stand for 30-60 minutes at 4°C.
- Add 10 mL Ham's F12 media containing 20% FBS and antibiotics to the tube and rock 12 times.
- Prepare 3 15 mL conical tubes containing 10 mL Ham's F12 media containing 20% FBS and antibiotics.
- Remove tracheas from Pronase solution, setting aside this solution on ice. Transfer tracheas to first conical tube containing Ham's F12 and invert tube 12 times. Repeat this process two more times.
- Combine Pronase solution with the three supernatants from step 1.13 into one 50 mL tube. Discard remaining tissue.
- Centrifuge at 1400rpm (390 x g; Eppendorf 5810R centrifuge equipped with an A-4-62 rotor) for 10 min at 4°C, and discard supernatant.
- Gently resuspend the pellet in 1 mL DNAse solution (100-200 μL/trachea) and incubate 5 min on ice.
- Centrifuge at 1400rpm (390 x g) for 5 min at 4°C, and discard supernatant.
- Resuspend the cell pellet in 8 mL MTEC medium containing 10% FBS
- Plate cell suspension on Primaria Plates (Falcon). Incubate at 37°C in an atmosphere of 95% air, 5% CO2 for 5 hrs (Note: this is a negative selection step for fibroblasts).
- Collect cell suspension from plates and rinse plates twice with 4 mL MTEC containing 10% FBS. Pool cell suspension and washes together in a 50 mL conical tube.
- Conserve 1 mL for cytospin and cell counting Spin in a tabletop centrifuge for 5 min at 5,000 rpm (Eppendorf 5415D). Remove 500 μL and resuspend pellet in remaining supernatant Use 100 μL for cell counting using the Trypan Blue vital staining method. Conserve 4 aliquots of 100 μL for cytospin analysis
- Spin remaining 15 mL cell suspension at 1400rpm (390 x g), at 4°C for 10 min.
2. Propagation and Differentiation of MTEC At Air-Liquid Interface
Prepare retinoic acid stock solutions Stock solution A: Weigh Retinoic acid in the dark (Mr 300.44 g/mol) to make a 5 mM stock solution in 95% EtOH. Store in a foil wrapped tube at -80°C As needed, prepare Stock solution B (5 μM) by adding 50 μL Stock A, 500 μL BSA solution (100 mg/ mL) and 49.5 mL Hank's balanced salt solution (HBSS). Store in a foil wrapped tube at -80°C for up to 4 weeks.
Prepare MTEC proliferation medium containing retinoic acid. To 45.7 mL MTEC basal media containing antibiotics, add 2.5 mL heat-inactivated FBS, 1 mL Retinoic acid Stock B, 250 μL Insulin solution (2 mg/mL insulin in 4 mM HCl ), 250 μL Epidermal growth factor solution (5 μg/mL EGF in HBS containing 1 mg/mL BSA), 200 μL bovine pituitary extract (15 mg/mL in HBS containing 1 mg/mL BSA), 50 μL Transferrin solution (5 mg/mL transferrin in HBS containing 1 mg/mL BSA), 50 μL cholera toxin solution (100 mg/mL in HBS containing 1 mg/mL BSA). Filter sterilize final media preparation and use within 2 days of preparation.
- Remove collagen solution from transwell plates, let stand under hood for 5 min, and wash with PBS 2 times.
- Following centrifugation, resuspend the cell pellet in an appropriate volume of proliferation media (500 μL) to facilitate plating of 7.5 x 104-1.0 x105 cells per well. Pipette 500 μL cell suspension onto the apical surface of the transwell polycarbonate membrane insert. Add 1.5 mL of proliferation media to the basal compartment of the transwell.
- Incubate the submerged MTEC cultures at 37°C in a humidified incubator containing 95% air, 5% CO2 for 7-10 days.
- Wait three days before changing media the first time. Change media every other day. Monitor cultures by visual inspection and measurement of transepithelial cell resistance using an electrode (EVOM Ohmvoltometer, World Precision Instruments, Sarasota, FL).
- When cells appear confluent and epithelial resistance reaches 1000 Ω/cm2, the cells are ready to differentiate at ALI.
- Prepare MTEC basal media containing 2% NuSerum. Add NuSerum to MTEC basic medium to a final concentration of 2% V/V. Add retinoic acid Stock B to a final concentration of 1 X 10-7 M before using. Prepare fresh and use within 2 days.
- Allow cell to differentiate for 10-14 days, by removing apical media and replacing the basal media with 750 μL MTEC basal media containing 2% Nuserum and retinoic acid. Change the basal media and wash the apical side with MTEC containing 2% NuSerum every other day.
3. Application of Cigarette Smoke to Cultured Epithelial Cells
- Expose the apical side of the transwell cultures to mainstream cigarette smoke using a CS cell exposure system (EMI Instruments, Pittsburgh, PA). See Figure 1 for photograph of the apparatus. See Table of specific reagents and equipment for technical specifications. In brief, the apparatus consists of a peristaltic pump which smokes each cigarette in ~7-8 puffs, drawing in the mainstream smoke into a polypropylene line that is connected to a vented exposure chamber. The exposure chamber is maintained at 37°C by circulating water, and maintained at an atmosphere of 5% CO2 on a gas line. The cells can be exposed to the smoke using Kentucky 3R4F research reference filter cigarettes (The Tobacco Research Institute, University of Kentucky, Lexington, KY). Typically cells are exposed to the smoke from 1-2 cigarettes, yielding 100-200 mg/m3 of total particulate matter (TPM). Control cultures are exposed to room air for an equivalent exposure period.
- The TPM is measured according to the manufacturer's protocol supplied with the TE-10c smoking machine (Teague Enterprises). In brief, a filter (Pallflex) is placed in an inline stainless steel holder on a sampling tube leading from the sampling port on the smoking chamber to a constant flow pump (sampling unit). An outflow tube connects the sampling unit to a gas meter (Dry Gas Meter, ONM61,67, AEM). The filter is weighed before and after gas sampling. The total material deposited on the filter in mg is normalized for the total volume of air sampled.
- The cells can then be harvested at any time point (i.e., 0-24 hrs) post exposure for standard cell analytical procedures (i.e., Western immunoblot analysis, mRNA analysis, etc.) or microscopy (i.e., confocal or electron microscopy). The culture media can also be analyzed for cytokines or LDH release for cytotoxicity assays.
4. Representative Results
Successful epithelial isolation, proliferation, and differentiation at ALI should yield an intact monolayer with a cobblestone morphology. Transepithelilal cell resistance of healthy cultures should be approximately 1000-2000 Ω/cm2. Figure 2 depicts a monolayer of mouse respiratory epithelial cells stained for epithelial cell and cilia markers under control conditions and after cigarette smoke exposure. Figure 3 shows representative electron micrographs of healthy MTEC cultures, depicting ultrastructure and cilia morphology.
Figure 1. Preparation of epithelial cells proceeds through three phases, an isolation step, a propagation stage, and a differentiation stage at air-liquid interface (scheme). Epithelial cells are isolated from mouse trachea, seeded onto transwells where they proliferate in submerged culture, and then converted into air-liquid interface where they fully differentiate. Experiments are typically conducted on the 24th day of continuous culture. The picture depicts a model system for exposure of cultured cells to mainstream cigarette smoke. A transwell ALI culture system is placed inside a custom modular cigarette smoke delivery system which is controlled for temperature, humidity and CO2.
Figure 2. Epithelial cell cultures were fixed and stained for nuclei (Hoechst 33258), F-actin (green; Alexa-Fluor 488-conjugated Phalloidin) and the cilia marker acetylated α-tubulin (red; Cy3-conjugated secondary antibody). The lower panels show equivalent images of epithelial cells taken 4 hours after exposure to cigarette smoke (2 cigarettes, 150 mg/m3). (B) Lactate dehydrogenase (LDH) release was measured in the basal medium 24 hours after exposure to varying doses of cigarette smoke as indicated.
Figure 3. Air-liquid interface cultures of epithelial cells isolated from mouse tracheal epithelium differentiate in several subtypes that by transmission electron microscopy (TEM) have the characteristics of ciliated, basal, and non-ciliated cells 1. These cells typify pseudostratified respiratory epithelium. Figure labels correspond to: bb: basal body, a: axoneme, m: mitochondria, n: nucleus, s: substrate (polycarbonate membrane), mv: microvili
Subscription Required. Please recommend JoVE to your librarian.
The protocol describing isolation of mouse tracheal epithelial cells is adapted from the protocols of You et al., 1, and others 2-3 with modifications. As with any protocol describing cell isolations, the most critical aspect is to avoid contamination from bacterial or fungal pathogens by using strict aseptic techniques. A second critical step is to avoid fibroblast contamination of the cultures, which can be avoided by careful dissection of the tracheas, and negative selection as described in Step 1.19. Provided that the cultures are monitored, washed, and the culture media replenished every other day following the initial 72 hour incubation, the cultures should fully differentiate in approximately two weeks from the initiation of ALI.
Chronic obstructive pulmonary disease (COPD), which is largely caused by chronic cigarette smoke exposure, continues to represent a major global health problem 4-7. COPD, is characterized by progressive airflow limitation, destructive alveolar loss (emphysema), and exaggerated inflammatory responses of the lung to cigarette smoke 4-7. A large number of studies have used alveolar, bronchial, and airway epithelial cell systems to attempt to model lung cell responses to CS. Many of these studies have been conducted in epithelial cell or transformed lines (i.e., Beas-2b), see Refs 8-11 for examples. The ALI transwell culture system allows the culture of pulmonary epithelial cells in fashion that is closer to their physiological orientation in the airway, than that which can be provided by conventional liquid (submerged) culture 1-3. Although the featured protocol describes the application of this system to mouse tracheal primary cultures 1, in principle other primary epithelial cells can be applied (i.e., mouse Type II epithelial cells, Human bronchial epithelial cells, etc.). The application of live mainstream CS to cell cultures represents a model that perhaps more closely approximates human exposure to CS than application of aqueous cigarette smoke extract (CSE), which is commonly used in cellular studies of CS exposure 12-15. CSE represents a soluble fraction of mainstream smoke that lacks many chemical components of whole smoke. While both CS exposure systems have limitations, CSE has the advantage of being more easily calibrated, since a single preparation can be used for multiple experiments, and dosing is achieved by dilution 15-16. On the other hand, we include here a method for quantifying mainstream smoke delivery based on TPM measurements. The elucidation of molecular and cellular responses to toxin exposure, in particular CS as exemplified in this article, will further the understanding of the impact of air pollution on human health, in particular the etiology of chronic diseases of the lung.
Subscription Required. Please recommend JoVE to your librarian.
No conflicts of interest declared.
We thank Emeka Ifedigbo for technical assistance and Dr. Shivraj Tyagi for valuable expertise. We also thank the Harvard NeuroDiscovery Center for assistance with microscopy. This work was supported in part by an American Heart Association Predoctoral grant 09PRE2250120 to Hilaire Lam, and NIH grants, R01-HL60234, R01-HL55330, R01-HL079904, awarded to A. M. K. Choi.
|Ham’s F12 Medium 1X
||From rat tail
||From Bovine Pancreas
|Bovine Serum Albumin
|Hank’s Balanced Salt Solution
||GIBCO, by Life Technologies
||Without Ca++ or Mg++
||Without L-Glutamine or HEPES
|HEPES, 1M in H2O
|Amphotericin B (Fungizone)
|Epidermal growth factor
|Bovine pituitary Extract
||12 mm, 0.4 mm Pore
|Primaria 100 mm culture dish
*The cigarette smoking machine is a custom designed and fabricated 14"x14"x20" Dual chambered and water jacketed light tint clear proof 1/2" thick polycarbonate Lexan chamber for cigarette smoke exposure with temperature controlled, water level sensor controlled shut off system. A cigarette smoking/puffing unit is installed for a variable cigarette puffing rates. When the unit is in use, it mimics an incubator in the sense that the temperature, humidity and carbon dioxide are controlled in the system. The system includes: (I) a customized dual chamber/water jacketed unit that maintains a controlled environment for tissue culture experiments. (II) A digital heavy duty, high precision dual pump water temperature circulator system with water level sensor and temperature control (III) A cigarette smoking unit with puffing pump. (IV) A pump cycle sensor control rate cycler (IV) A Stainless steel high precision in-Line filter holder. (V) A Detachable lid mounted 11/2" size axial uniformity cigarette smoke mixing fan. (VI) A medium size water bath with mounting bracket for the water circulator. (VII) A 1/2’ thick Plexiglas tray with brackets for the puff pump and holder for cigarette ash collector.
This machine as described can be substituted with similar commercially-available smoking machines such as the kind available from TSE systems (www.tse-systems.com).
- You, Y., Richer, E.J., Huang, T., & Brody, S.L. Growth and differentiation of mouse tracheal epithelial cells: selection of a proliferative population. Am. J. Physiol. Lung Cell Mol. Physiol. 283, L1315-L1321 (2002).
- Davidson, D.J. et al. Murine epithelial cells: isolation and culture. J. Cyst. Fibros. 3 Suppl 2, 59-62 (2004).
- Davidson, D. J., Kilanowski, F. M., Randell, S.H., Sheppard, D.N., & Dorin, J. R. A primary culture model of differentiated murine tracheal epithelium. Am. J. Physiol. Lung Cell Mol. Physiol. 279, L766-L778 (2000).
- Rabe, K. F., et al.; Global Initiative for Chronic Obstructive Lung Disease. Global strategy for the diagnosis, management, and prevention of chronic obstructive pulmonary disease: GOLD executive summary. Am. J Respir. Crit. Care Med. 176, 532-555 (2007).
- Macnee W. Pathogenesis of chronic obstructive pulmonary disease. Clin. Chest Med. 28, 479-513 (2007).
- Tuder, R. M., Yoshida, T., Arap, W., Pasqualini, R., & Petrache, I. State of the art. Cellular and molecular mechanisms of alveolar destruction in emphysema: an evolutionary perspective. Proc. Am. Thorac. Soc. 3, 503-510 (2006).
- Yao H, Rahman I. Current concepts on the role of inflammation in COPD and lung cancer. Curr. Opin. Pharmacol. 9, 375-383 (2009).
- van der Toorn, M., et al. Cigarette smoke irreversibly modifies glutathione in airway epithelial cells. Am. J. Physiol. Lung Cell Mol. Physiol. 293, L1156-L1162 (2007).
- Slebos, D.J. et al. Mitochondrial localization and function of heme oxygenase-1 in cigarette smoke-induced cell death. Am. J. Respir. Cell Mol. Biol. 36, 409-417 (2007).
- Kim, H.P., et al. Autophagic proteins regulate cigarette smoke induced apoptosis: protective role of heme oxygenase-1. Autophagy 4:7, 887-895 (2008).
- Chen, Z. H., et al. Egr-1 regulates autophagy in cigarette smoke-induced chronic obstructive pulmonary disease. PLoS ONE 3, e3316. (2008).
- Okuwa, K., et al., In vitro micronucleus assay for cigarette smoke using a whole smoke exposure system: A comparison of smoking regimens. Exp Toxicol Pathol. 2009 [Epub ahead of print].
- St-Laurent, J., Proulx, L.I., Boulet, L.P., & Bissonnette, E. Comparison of two in vitro models of cigarette smoke exposure. Inhal. Toxicol. 21, 1148-1153 (2009).
- Watson AM, Benton AS, Rose MC, & Freishtat RJ. Cigarette smoke alters tissue inhibitor of metalloproteinase 1 and matrix metalloproteinase 9 levels in the basolateral secretions of human asthmatic bronchial epithelium in vitro. J Investig. Med. 58, 725-729 (2010).
- Rennard, S.I. Cigarette smoke in research. Am. J. Respir. Cell Mol. Biol. 31, 479-480 (2004).
- Shapiro, S.D. Smoke gets in your cells. Am. J. Respir. Cell Mol. Biol. 31, 481-482 (2004).