View the full transcript and gain access to JoVE Science Education videos
Q1: What should you do immediately when a chemical spill occurs in the lab?
First, put on proper personal protective equipment such as chemical resistant gloves and safety goggles. Stop the flow of the spilled material to minimize damage, then isolate the spill site by marking or roping off the area. For large or acutely dangerous chemical spills, evacuate immediately and contact local emergency services.
Q2: How do you contain a chemical spill after controlling its flow?
Use sorbent material from chemical spill kits located in the laboratory directly on or around the spilled material. Prevent the spill from spreading to surrounding areas and ensure it does not go down any drains. This containment step is critical to limiting environmental and health hazards.
Q3: What cleanup and disposal steps are required after a chemical spill?
Remove sorbent material used to absorb the spill and place it in a container labeled as hazardous waste. Dispose of gloves and contaminated garments immediately. Decontamination or neutralization of the area may be required depending on the chemical's toxicity. Verify with your organization's EHS office that cleanup meets regulatory requirements.
Q4: Why is responding quickly to a chemical spill important?
The more quickly a spill is controlled, the more likely it will be contained in a small area, reducing potential damage to public health and the environment. Delayed response increases contamination risk and severity of consequences. All spills must comply with regulations such as RCRA and the Emergency Planning and Community Right-to-Know Act.
Q5: What role does the EHS office play in chemical spill cleanup?
The person responsible for the spill should report it to the EHS office. EHS will oversee or assist in cleanup depending on the toxicity or quantity of the material. They ensure decontamination or neutralization occurs as needed and verify that all cleanup meets regulatory standards and requirements.
Q6: How can you prevent chemical spills from happening in the laboratory?
Assess the types of chemical hazards present and pay close attention to their storage. Maintain laboratory equipment used near chemicals by periodically checking for leaks, loose connections, or faulty valves. Understanding chemical storage categories hazards and compatibilities helps minimize accidental releases.
Q7: What information should be provided to emergency responders during a large chemical spill?
Have someone remain near the spill scene to provide information from safety data sheets to emergency responders. This critical information helps responders understand the chemical's hazards, appropriate containment methods, and necessary precautions. Never leave the scene unattended during a large or dangerous spill emergency.
Copyright © 2026 MyJoVE Corporation. All rights reserved