Shoulder Exam II

Physical Examinations III

Your institution must subscribe to JoVE's Clinical Skills collection to access this content.

Fill out the form below to receive a free trial or learn more about access:

Welcome!

Enter your email below to get your free 1 hour trial to JoVE!





By clicking "Submit", you agree to our policies.

 

Overview

Source: Robert E. Sallis, MD. Kaiser Permanente, Fontana, California, USA

The shoulder exam continues by checking the strength of the rotator cuff muscles and biceps tendons. The rotator cuff muscles (supraspinatus, infraspinatus, teres minor, and subscapularis) act as compressors, holding the humeral head in place against the glenoid. Injury and degeneration of the rotator cuff tendons are the most common sources of shoulder pain.

The strength testing of the rotator muscle is performed by testing motions against resistance applied by the examiner. Pain with these resisted motions suggests tendonitis; weakness suggests a rotator cuff tear. The strength tested is followed by tests for impingement syndrome, shoulder instability, and labrum injury. It is important to test both of the shoulders and compare between the sides. The opposite shoulder should be used as the standard to evaluate the injured shoulder, provided it has not been injured as well.

Cite this Video

JoVE Science Education Database. Physical Examinations III. Shoulder Exam II. JoVE, Cambridge, MA, (2017).

Procedure

1. Strength Testing of the Rotator Cuff Muscle

Strength testing of the rotator cuff is assessed using resisted motion. The following resisted motions should be tested:

  1. External rotation: Ask the patient to bend both elbows to 90o with arms hanging at the side, and then to push both hands away from the midline against resistance. This tests strength of the infraspinatus and teres minor.
  2. Internal rotation: Ask the patient to bend both elbows to 90o with arms hanging at the side and then to push both hands toward the midline against resistance. This tests the strength of the subscapularis muscle.
  3. Empty can test: Ask the patient to raise both arms at the side to 90o with thumbs down and then move arms forward 30°. Ask the patient to hold the arms in this position while you attempt to push the arms down. This maneuver tests the strength of the supraspinatus muscle.
  4. Speeds test: Have the patient raise both arms in front to 90o with the palms up and elbows bent to 15o flexion. Ask the patient to hold the arms in this position while you attempt to push the arms down. This maneuver tests the strength of the biceps.
  5. Yergason's test: Ask the patient to bend the elbow to 90o and hold while you attempt to pull the arm down, at the same time trying to twist it into pronation. This maneuver tests the strength of the biceps.
  6. Triceps test: Ask the patient to bend the elbow forward to 90o and then push hands forward against your resistance. This tests strength of the triceps

2. Impingement Signs/Impingement Test

Impingement signs are used to diagnose impingement syndrome. Three impingement signs are elicited by passively moving the shoulder into the following positions while watching for pain or lack of motion.

  1. Neer's impingement sign: Passively raise the patient's affected arm in front (with the palm pointing down) as far as it can go overhead before significant pain is felt. Compare to the unaffected arm.
  2. Hawkins' impingement sign: Raise the patient's arm forward to 90o with the elbow also bent to 90o. From there, passively rotate the shoulder internally and externally.
  3. Crossover test: Passively raise the unaffected arm forward to 90o and then move it across the body with the elbow bent as far as it can go toward the opposite shoulder. This maneuver also worsens AC joint pain.
  4. The impingement test involves injecting local anesthetic (such as lidocaine) into the subacromial space. The impingement signs are then repeated and relief of pain confirms the impingement syndrome. Rotator cuff (RC) strength testing should also be retested after injection to relieve painful inhibition of strength and more accurately assess for RC tear.

3. Instability Tests

Several tests can be done to assess for glenohumeral joint instability. These include:

  1. Apprehension tests: These are positive only when they provoke an unpleasant sensation of the shoulder coming out of joint. Simple pain with these tests may be from rotator cuff or labrum injury, rather than instability. The apprehension tests are done in both the anterior and posterior direction.
    1. Anterior apprehension test:
      1. Position the patient supine with shoulder raised up from the side to 90o and the elbow bent to 90°.
      2. Apply an anterior force to the posterior aspect of the shoulder pushing the humeral head forward.
    2. Posterior apprehension test:
      1. Position the patient supine with the shoulder raised up from the side to 90o and the elbow bent to 90°.
      2. Apply a posterior force to the anterior aspect of the patient's shoulder pushing the humeral head backward.
  2. Relocation test:
    1. Position the patient supine, with the arm raised from the side to 90o and hanging off the edge of the exam table while the elbow is bent to 90o.
    2. Rotate the patient's shoulder externally until discomfort is noted.
    3. Apply posterior pressure to the anterior humeral head. No change or worsening of discomfort with this maneuver suggests simple impingement; relief in the discomfort suggests anterior instability.
  3. Sulcus Sign
    1. Have the patient to stand or sit with the arms hanging at the side.
    2. Grasp the patient's arm just above the elbow and pull it downward. A downward pull on the arm causes a prominent "sulcus" to form (between acromion and humeral head), with inferior instability (this often suggests multidirectional instability).

4. Labrum Tests

  1. Clunk test:
    Position the patient supine and passively rotate the shoulder through a full overhead range of motion. A prominent clunk or pop may indicate a labrum tear.
  2. Labrum grind test:
    1. Position the patient supine with the elbow bent to 90° and shoulder raised from the side to 90°.
    2. Grasp the patient's upper arm and compress the humeral head into glenoid while internally and externally rotating the humerus. Significant pain or clunking with this maneuver suggests labrum injury.
  3. O'Brien's test (can be performed with the patient sitting or standing):
    1. Have the patient forward flex both arms to 90°, with 10° horizontal adduction and elbows extended.
    2. Ask the patient to rotate the shoulders so the thumbs are pointing up and apply a downward force to both arms.
    3. Repeat with the patient internally rotating the shoulder so the thumbs are pointing down. Increased pain in the thumbs down position (compared to the thumbs up) is suggestive of SLAP (superior labrum, anterior/posterior) injury to the labrum. Note that this maneuver will also aggravate acromioclavicular joint pain.

Examination of the shoulder includes simple but sensitive tests, which help a clinician, reach a diagnosis.

In shoulder exam part one, we covered inspection, palpation, and testing the range of motion. This video will focus on the maneuvers evaluating muscle strength and a few special tests for specific shoulder injuries and diseases.

The strength of the rotator cuff muscle is assessed by testing movement against resistance provided by the examiner. Pain with these resisted motions suggests tendonitis, whereas weakness suggests a tear. On the other hand, the special tests are performed to reproduce the symptoms of impingement syndrome, shoulder instability, or labrum injury.

First, lets review the strength tests, which involve a series of resisted motions. Remember, it is important to compare one side to the other in assessing pain or weakness. These maneuvers assess the muscles of the rotator cuff, and then the biceps and the triceps.

Start by testing the infraspinatus and teres minor muscles by examining external rotation motion against resistance. With elbows bent to 90°, ask the patient to push both hands away from the midline while you try to push them inwards. Next, assess the subscapularis muscle by doing to opposite and testing internal rotation against resistance. The following maneuver evaluates the supraspinatus muscle (2.4.1). This is the "empty-can test". Have the patient raise both the arms to their sides and about 30° forward with their thumbs down. Then instruct them to hold this position, while you are attempting to push their arms down.

The following two tests evaluate the biceps muscle. For the first test called the Speeds Test, have the patient raise both arms in front to 90° with their palms up and elbows bent to 15° flexion. Ask them to hold this position while you attempt to push the arms down. Next, for the Yergason's Test, ask the patient to bend their elbow to 90° and hold while you attempt to pull their arm down, at the same time trying to twist it into pronation. Finally, test the triceps. Request the patient to bend the elbow forward to 90° and then ask them to push against your hand in an attempt straighten the arm.

After the muscle strength tests, the next group of maneuvers is performed to elicit the pain associated with the impingement syndrome, which is a painful condition caused by inflammation and degeneration of rotator cuff tendons when they are impinged, or trapped, in the subacromial space.

Start with eliciting the Neer's impingement sign. Passively raise the patient's affected arm in front of them and overhead. This test is considered positive if pain is reproduced at maximal forward flexion. For the next test called the Hawkins' impingement sign. Raise the patient's arm forward to 90° with the elbow bent to 90°, and passively rotate the shoulder externally and internally. Finally, perform the crossover test. Raise the patient's arm forward to 90° and move it across the body towards the opposite shoulder. Repeat the same maneuver on the other side and note if the patient feels any pain over the acromioclavicular joint.

The next group of maneuvers assess for glenohumeral joint instability, which refers to the inability of maintaining the humeral head centered inside the glenoid fossa.

The first set of maneuvers in this group is called the Apprehension Tests done in both the anterior and posterior direction. Position the arm in 90° abduction position and elbow bent to 90° and apply an anterior force to the posterior aspect of the shoulder. Next, ask the patient to lie down, and in the same arm position apply a posterior force on the anterior aspect of the shoulder. These tests are considered positive only when they provoke an unpleasant sensation of the shoulder coming out of joint. Simple pain with these tests may be from rotator cuff or labrum injury, rather than instability.

For the subsequent test, called the Relocation Test, passively rotate the patient's shoulder externally until discomfort is noted. Then apply downward pressure to the anterior humeral head. This should relieve the shoulder discomfort in patients with anterior instability. Next, request the patient to stand up. With their arms hanging at the sides, grasp the patient's arm just above their elbow and pull it downward. This would cause formation of a prominent sulcus between the acromion and the humeral head in a patient with inferior instability.

Now lets review the final group of tests called the labrum tests. These maneuvers are performed to diagnose the injury of the cartilage rim that surrounds the glenoid fossa called the glenoid labrum.

Start with the "Clunk test". In seated position, passively rotate the patient's shoulder through a full range of motion. A prominent "clunk" or a "pop" may indicate labrum tear. For the next test, have the patient bend their elbow to 90° and raise their shoulder on the side to 90°. Then grasp the upper arm and compress their humeral head is into the glenoid cavity, while rotating the humerus internally and externally. This maneuver is called the Labrum Grind Test, and it induces significant pain or "clunking" in patients with a labrum injury.

Finally, perform the "O'Brien's test" for SLAP, that is superior labrum, anterior and posterior labral injury. Ask the patient to forward flex both arms to 90° with 10° horizontal adduction and elbows extended. Instruct them to rotate their arms so their thumbs are pointing up. Then apply a downward force on both arms. Repeat the same maneuver in thumbs down position. Increased pain in the thumbs down position, compared to the thumbs up, is suggestive of SLAP injury. Note that this maneuver will also aggravate acromioclavicular joint pain. This test concludes the shoulder examination. Remember, that systematic evaluation of a patient with shoulder pain should also include the neck exam.

You've just watched JoVE's video demonstrating a part of the shoulder examination. In our first video on this topic, we reviewed how to perform inspection and palpation of the shoulder and how to evaluate range of motion. The current video demonstrated how to test the shoulder muscles strength, and how to perform special tests for the impingement syndrome, shoulder instability, and labrum injury. As always, thanks for watching!

Summary

The clinical evaluation of the shoulder begins with inspection, palpation, and testing range of motion, followed by strength testing of the rotator cuff and biceps muscles. While assessing the strength of the rotator cuff muscles, it is essential to differentiate true muscle weakness from a painful inhibition of strength that can be seen with severe tendonitis. The next part of the exam is the assessment for signs of impingement, using the Neer's, Hawkins, and crossover tests. Pain or lack of motion with these maneuvers suggests impingement of the rotator cuff tendons in the subacromial space. Stability of the shoulder is then evaluated using the anterior and posterior drawer tests, the sulcus sign, and the relocation test. Finally, the labrum is evaluated for injury using the clunk test, labrum grind test, and O'Brien's test.

1. Strength Testing of the Rotator Cuff Muscle

Strength testing of the rotator cuff is assessed using resisted motion. The following resisted motions should be tested:

  1. External rotation: Ask the patient to bend both elbows to 90o with arms hanging at the side, and then to push both hands away from the midline against resistance. This tests strength of the infraspinatus and teres minor.
  2. Internal rotation: Ask the patient to bend both elbows to 90o with arms hanging at the side and then to push both hands toward the midline against resistance. This tests the strength of the subscapularis muscle.
  3. Empty can test: Ask the patient to raise both arms at the side to 90o with thumbs down and then move arms forward 30°. Ask the patient to hold the arms in this position while you attempt to push the arms down. This maneuver tests the strength of the supraspinatus muscle.
  4. Speeds test: Have the patient raise both arms in front to 90o with the palms up and elbows bent to 15o flexion. Ask the patient to hold the arms in this position while you attempt to push the arms down. This maneuver tests the strength of the biceps.
  5. Yergason's test: Ask the patient to bend the elbow to 90o and hold while you attempt to pull the arm down, at the same time trying to twist it into pronation. This maneuver tests the strength of the biceps.
  6. Triceps test: Ask the patient to bend the elbow forward to 90o and then push hands forward against your resistance. This tests strength of the triceps

2. Impingement Signs/Impingement Test

Impingement signs are used to diagnose impingement syndrome. Three impingement signs are elicited by passively moving the shoulder into the following positions while watching for pain or lack of motion.

  1. Neer's impingement sign: Passively raise the patient's affected arm in front (with the palm pointing down) as far as it can go overhead before significant pain is felt. Compare to the unaffected arm.
  2. Hawkins' impingement sign: Raise the patient's arm forward to 90o with the elbow also bent to 90o. From there, passively rotate the shoulder internally and externally.
  3. Crossover test: Passively raise the unaffected arm forward to 90o and then move it across the body with the elbow bent as far as it can go toward the opposite shoulder. This maneuver also worsens AC joint pain.
  4. The impingement test involves injecting local anesthetic (such as lidocaine) into the subacromial space. The impingement signs are then repeated and relief of pain confirms the impingement syndrome. Rotator cuff (RC) strength testing should also be retested after injection to relieve painful inhibition of strength and more accurately assess for RC tear.

3. Instability Tests

Several tests can be done to assess for glenohumeral joint instability. These include:

  1. Apprehension tests: These are positive only when they provoke an unpleasant sensation of the shoulder coming out of joint. Simple pain with these tests may be from rotator cuff or labrum injury, rather than instability. The apprehension tests are done in both the anterior and posterior direction.
    1. Anterior apprehension test:
      1. Position the patient supine with shoulder raised up from the side to 90o and the elbow bent to 90°.
      2. Apply an anterior force to the posterior aspect of the shoulder pushing the humeral head forward.
    2. Posterior apprehension test:
      1. Position the patient supine with the shoulder raised up from the side to 90o and the elbow bent to 90°.
      2. Apply a posterior force to the anterior aspect of the patient's shoulder pushing the humeral head backward.
  2. Relocation test:
    1. Position the patient supine, with the arm raised from the side to 90o and hanging off the edge of the exam table while the elbow is bent to 90o.
    2. Rotate the patient's shoulder externally until discomfort is noted.
    3. Apply posterior pressure to the anterior humeral head. No change or worsening of discomfort with this maneuver suggests simple impingement; relief in the discomfort suggests anterior instability.
  3. Sulcus Sign
    1. Have the patient to stand or sit with the arms hanging at the side.
    2. Grasp the patient's arm just above the elbow and pull it downward. A downward pull on the arm causes a prominent "sulcus" to form (between acromion and humeral head), with inferior instability (this often suggests multidirectional instability).

4. Labrum Tests

  1. Clunk test:
    Position the patient supine and passively rotate the shoulder through a full overhead range of motion. A prominent clunk or pop may indicate a labrum tear.
  2. Labrum grind test:
    1. Position the patient supine with the elbow bent to 90° and shoulder raised from the side to 90°.
    2. Grasp the patient's upper arm and compress the humeral head into glenoid while internally and externally rotating the humerus. Significant pain or clunking with this maneuver suggests labrum injury.
  3. O'Brien's test (can be performed with the patient sitting or standing):
    1. Have the patient forward flex both arms to 90°, with 10° horizontal adduction and elbows extended.
    2. Ask the patient to rotate the shoulders so the thumbs are pointing up and apply a downward force to both arms.
    3. Repeat with the patient internally rotating the shoulder so the thumbs are pointing down. Increased pain in the thumbs down position (compared to the thumbs up) is suggestive of SLAP (superior labrum, anterior/posterior) injury to the labrum. Note that this maneuver will also aggravate acromioclavicular joint pain.

Examination of the shoulder includes simple but sensitive tests, which help a clinician, reach a diagnosis.

In shoulder exam part one, we covered inspection, palpation, and testing the range of motion. This video will focus on the maneuvers evaluating muscle strength and a few special tests for specific shoulder injuries and diseases.

The strength of the rotator cuff muscle is assessed by testing movement against resistance provided by the examiner. Pain with these resisted motions suggests tendonitis, whereas weakness suggests a tear. On the other hand, the special tests are performed to reproduce the symptoms of impingement syndrome, shoulder instability, or labrum injury.

First, lets review the strength tests, which involve a series of resisted motions. Remember, it is important to compare one side to the other in assessing pain or weakness. These maneuvers assess the muscles of the rotator cuff, and then the biceps and the triceps.

Start by testing the infraspinatus and teres minor muscles by examining external rotation motion against resistance. With elbows bent to 90°, ask the patient to push both hands away from the midline while you try to push them inwards. Next, assess the subscapularis muscle by doing to opposite and testing internal rotation against resistance. The following maneuver evaluates the supraspinatus muscle (2.4.1). This is the "empty-can test". Have the patient raise both the arms to their sides and about 30° forward with their thumbs down. Then instruct them to hold this position, while you are attempting to push their arms down.

The following two tests evaluate the biceps muscle. For the first test called the Speeds Test, have the patient raise both arms in front to 90° with their palms up and elbows bent to 15° flexion. Ask them to hold this position while you attempt to push the arms down. Next, for the Yergason's Test, ask the patient to bend their elbow to 90° and hold while you attempt to pull their arm down, at the same time trying to twist it into pronation. Finally, test the triceps. Request the patient to bend the elbow forward to 90° and then ask them to push against your hand in an attempt straighten the arm.

After the muscle strength tests, the next group of maneuvers is performed to elicit the pain associated with the impingement syndrome, which is a painful condition caused by inflammation and degeneration of rotator cuff tendons when they are impinged, or trapped, in the subacromial space.

Start with eliciting the Neer's impingement sign. Passively raise the patient's affected arm in front of them and overhead. This test is considered positive if pain is reproduced at maximal forward flexion. For the next test called the Hawkins' impingement sign. Raise the patient's arm forward to 90° with the elbow bent to 90°, and passively rotate the shoulder externally and internally. Finally, perform the crossover test. Raise the patient's arm forward to 90° and move it across the body towards the opposite shoulder. Repeat the same maneuver on the other side and note if the patient feels any pain over the acromioclavicular joint.

The next group of maneuvers assess for glenohumeral joint instability, which refers to the inability of maintaining the humeral head centered inside the glenoid fossa.

The first set of maneuvers in this group is called the Apprehension Tests done in both the anterior and posterior direction. Position the arm in 90° abduction position and elbow bent to 90° and apply an anterior force to the posterior aspect of the shoulder. Next, ask the patient to lie down, and in the same arm position apply a posterior force on the anterior aspect of the shoulder. These tests are considered positive only when they provoke an unpleasant sensation of the shoulder coming out of joint. Simple pain with these tests may be from rotator cuff or labrum injury, rather than instability.

For the subsequent test, called the Relocation Test, passively rotate the patient's shoulder externally until discomfort is noted. Then apply downward pressure to the anterior humeral head. This should relieve the shoulder discomfort in patients with anterior instability. Next, request the patient to stand up. With their arms hanging at the sides, grasp the patient's arm just above their elbow and pull it downward. This would cause formation of a prominent sulcus between the acromion and the humeral head in a patient with inferior instability.

Now lets review the final group of tests called the labrum tests. These maneuvers are performed to diagnose the injury of the cartilage rim that surrounds the glenoid fossa called the glenoid labrum.

Start with the "Clunk test". In seated position, passively rotate the patient's shoulder through a full range of motion. A prominent "clunk" or a "pop" may indicate labrum tear. For the next test, have the patient bend their elbow to 90° and raise their shoulder on the side to 90°. Then grasp the upper arm and compress their humeral head is into the glenoid cavity, while rotating the humerus internally and externally. This maneuver is called the Labrum Grind Test, and it induces significant pain or "clunking" in patients with a labrum injury.

Finally, perform the "O'Brien's test" for SLAP, that is superior labrum, anterior and posterior labral injury. Ask the patient to forward flex both arms to 90° with 10° horizontal adduction and elbows extended. Instruct them to rotate their arms so their thumbs are pointing up. Then apply a downward force on both arms. Repeat the same maneuver in thumbs down position. Increased pain in the thumbs down position, compared to the thumbs up, is suggestive of SLAP injury. Note that this maneuver will also aggravate acromioclavicular joint pain. This test concludes the shoulder examination. Remember, that systematic evaluation of a patient with shoulder pain should also include the neck exam.

You've just watched JoVE's video demonstrating a part of the shoulder examination. In our first video on this topic, we reviewed how to perform inspection and palpation of the shoulder and how to evaluate range of motion. The current video demonstrated how to test the shoulder muscles strength, and how to perform special tests for the impingement syndrome, shoulder instability, and labrum injury. As always, thanks for watching!

A subscription to JoVE is required to view this article.
You will only be able to see the first 20 seconds.

RECOMMEND JoVE