JoVE Science Education
Organic Chemistry
This content is Free Access.
JoVE Science Education Organic Chemistry
Purifying Compounds by Recrystallization
  • 00:00Overview
  • 00:58Principles of Recrystallization
  • 03:41Selecting a Solvent
  • 04:50Recrystallization
  • 07:40Applications
  • 09:31Summary

Reinigen von Verbindungen durch Umkristallisation

English

Share

Overview

Quelle: Labor von Dr. Jimmy Franco – Merrimack College

Rekristallisation ist eine Technik verwendet, um feste Verbindungen zu reinigen. 1 Feststoffe tendenziell besser löslich in heißer Flüssigkeiten als in kalten Flüssigkeiten. Während Rekristallisation ist eine unreine solide Verbindung in eine heiße Flüssigkeit aufgelöst, bis die Lösung gesättigt ist, und dann die Flüssigkeit darf abkühlen lassen. 2 die Verbindung sollte dann relativ reines Kristalle bilden. Im Idealfall Verunreinigungen, die vorhanden sind in der Lösung bleiben und fließen nicht in die wachsenden Kristalle (Abbildung 1). Die Kristalle können dann die Lösung durch Filtration entfernt werden. Nicht alle der Verbindung ist wiederherstellbar – einige bleiben in der Lösung und werden verloren gehen.

Rekristallisation wird im Allgemeinen als eine Trennung Technik nicht gedacht; Vielmehr ist es eine Reinigung-Technik, bei der eine kleine Menge einer Verunreinigung von einer Verbindung entfernt wird. Jedoch wenn die Löslichkeit Eigenschaften der beiden Verbindungen ausreichend unterscheiden, Rekristallisation lässt sich trennen, auch wenn sie in fast gleicher Höhe vorhanden sind. Rekristallisation funktioniert am besten, wenn die meisten Verunreinigungen bereits durch eine andere Methode, wie z. B. Extraktion oder Spalte Chromatographie entfernt wurden.

Figure 1
Abbildung 1. Der allgemeinen Regelung für Rekristallisation.

Principles

Eine erfolgreiche Rekristallisation hängt die richtige Wahl des Lösungsmittels. Die Verbindung muss in die heiße Lösungsmittel und unlöslich in dem gleichen Lösungsmittel löslich sein, wenn es kalt ist. Für die Zwecke der Rekristallisation, 3 % w/V betrachten die Trennlinie zwischen löslichen und unlöslichen: Wenn 3 g eines Stoffes in 100 mL Lösungsmittel auflöst, wird es als löslich. Bei der Wahl eines Lösungsmittels, je größer der Unterschied zwischen heißen Löslichkeit und kalten Löslichkeit, das mehr Produkt erzielbare von Rekristallisation.

Die Rate des Abkühlens bestimmt die Größe und Qualität der Kristalle: schnelle Abkühlung begünstigt kleine Kristalle und langsame Abkühlung begünstigt das Wachstum der großen und in der Regel reiner Kristalle. Rekristallisation beträgt in der Regel größte bei ca. 50 ° C unterhalb des Schmelzpunktes des Stoffes; die maximale Bildung von Kristallen tritt bei etwa 100 ° C unterhalb des Schmelzpunktes.

Obwohl die Begriffe “Kristallisation” und “Rekristallisation” manchmal synonym verwendet werden, beziehen sie sich technisch auf unterschiedliche Prozesse. Kristallisation bezieht sich auf die Bildung eines neuen, unlöslichen Produktes durch eine chemische Reaktion; Dieses Produkt fällt dann aus der Reaktionslösung aus als eine amorphe Festkörper mit vielen eingeschlossenen Verunreinigungen. Rekristallisation ist nicht erforderlich, eine chemische Reaktion. Das Rohprodukt wird einfach in der Lösung aufgelöst, und dann die Bedingungen geändert werden, um Kristalle zu re-form zu ermöglichen. Rekristallisation produziert ein reineres Endprodukt. Aus diesem Grund gehören experimentelle Verfahren, die ein solides Produkt durch Kristallisation normalerweise produzieren einen endgültige Rekristallisation Schritt um die reine Verbindung zu geben.

Procedure

Führen Sie alle Schritte in einer Dampfhaube, Belastung durch Lösemitteldämpfe zu verhindern. 1. Auswahl eines Lösungsmittels Legen Sie 50 mg der Probe (N-Bromsuccinimid) in einen Erlenmeyerkolben. Hinzugeben Sie 0,5 mL kochendes Lösungsmittel (Wasser). Wenn die Probe vollständig auflöst, ist die Löslichkeit in den kalten Lösungsmittel zu hoch, um eine gute Rekristallisation Lösungsmittel. Wenn die Probe nicht im kalten Lösungsmittel löst, erhitzen Sie das Reagenzglas, bis das Lösungsmittel kocht. Wenn die Probe nicht zu diesem Zeitpunkt vollständig aufgelöst hat, fügen Sie mehr kochendes Lösungsmittel tropfenweise, bis alle festen auflöst. Wenn es mehr als 3 mL die Probe in die heiße Lösungsmittel auflösen dauert, ist die Löslichkeit in diesem Lösungsmittel vermutlich zu gering zu machen, eine gute Rekristallisation Lösungsmittel. Ist die erste Wahl des Lösungsmittels nicht gut Rekristallisation Lösungsmittel, versuchen Sie andere. Wenn ein einziges Lösungsmittel, das funktioniert nicht gefunden werden kann, versuchen Sie zwei Lösungsmittelsystem. Wenn Sie ein geeignetes Lösungsmittels System nicht finden können, kann ein Lösungsmittel paar erforderlich sein. Wenn ein Lösungsmittel paar identifizieren, gibt es mehrere wichtige Überlegungen 1) das erste Lösungsmittel sollten leicht festen auflösen. (2) das zweite Lösungsmittel muss mit 1St Lösungsmittel mischbar, aber haben eine viel geringere Löslichkeit für die gelösten. Als allgemeine Regel “likes” gerne auflösen was bedeutet, dass die polare Verbindungen sind in der Regel löslich in polaren Lösungsmitteln und unpolaren Verbindungen sind oft mehr lösliche unpolaren Verbindungen. Allgemeine Lösungsmittel Paare (Tabelle 1) Stellen Sie sicher, dass das Lösungsmittel hat einen Siedepunkt von mindestens 40 ° C, so gibt es ein angemessene Temperatur-Unterschied zwischen kochendes Lösungsmittel und Raumtemperatur Lösungsmittel. Stellen Sie sicher, dass das Lösungsmittel einen Siedepunkt unter ca. 120 ° C, hat so ist es einfacher, die letzten Spuren des Lösungsmittels aus der Kristalle zu entfernen. Stellen Sie außerdem sicher, dass der Siedepunkt des Lösungsmittels ist niedriger als der Schmelzpunkt der Verbindung, so dass die Verbindung als feste Kristalle nicht als unlösliche Öl bildet. Bestätigen, dass die Verunreinigungen entweder sind in die heiße Lösungsmittel (so heiß-herausgefiltert, können sie die Verbindung aufgelöst ist) unlöslich oder löslich in kalten Lösungsmittel (so dass sie während des gesamten Prozesses gelösten bleiben). (2) auflösen die Probe in heiße Lösungsmittel Legen Sie die Masse in einen Erlenmeyerkolben umkristallisiert werden. Dies ist eine bessere Wahl als ein Becherglas, da die abfallenden Seiten Falle Lösungsmitteldämpfe helfen und die Rate von Verdampfung verlangsamen. Das Lösungsmittel (Wasser) in einem separaten Erlenmeyer-Kolben, geben Sie und kochendes Chips oder Stir Bar kochendem glatt zu halten. Bis zum Sieden auf einer Kochplatte erhitzen. Fügen Sie heiße Lösungsmittel in einem Kolben bei Raumtemperatur, enthält die Substanz in kleinen Portionen, nach jeder Zugabe, wirbeln, bis die Verbindung vollständig gelöst ist. Halten Sie bei der Auflösung die Lösung heiß aller Zeiten durch ruht es auf der Herdplatte zu. Fügen Sie mehr heiße Lösungsmittel als nötig – nicht gerade genug, um die Probe auflöst. Wenn ein Teil des Festkörpers nicht aufzulösen scheint, auch nach mehr heiße Lösungsmittel hinzugefügt wurde, dürfte aufgrund der Anwesenheit von sehr unlösliche Verunreinigungen. In diesem Fall stoppen Sie, Hinzufügen von Lösungsmittel und machen Sie eine heiße Filtration, bevor Sie fortfahren. Eine heiße Filtration, Falten ein Stück Filterpapier in eine geriffelte Kegelform und legen Sie sie in ein Glas stammlose Trichter. Die heiße Lösung, um Verdampfung im Verfahren ermöglichen fügen Sie eine 10-20 % Überschuss an heiße Lösungsmittel hinzu. Gießen Sie die Lösung durch das Papier. Wenn Kristalle jederzeit während des Prozesses zu bilden beginnen, fügen Sie einen kleinen Teil des warmen Lösungsmittel um sie aufzulösen. 3. Kühllösung die Legen Sie die Flasche mit der gelösten Verbindung auf eine Oberfläche, die nicht die Wärme Weg zu schnell, wie ein Papiertuch legen auf eine Tischplatte zu leiten. Decken Sie leicht die Küvette abkühlen um Verdunstung zu verhindern und zu verhindern, dass Staub in die Lösung fallen. Lassen Sie den Kolben ungestört, bis es auf Raumtemperatur abkühlt. Sobald die Kristalle gebildet haben, legen Sie die Lösung in ein Eisbad um sicherzustellen, dass der Höchstbetrag der Kristalle gewonnen wird. Die Lösungen sollten Links ungestört im Eisbad für 30 min bis 1 h, oder bis die Verbindung scheint völlig aus der Lösung kristallisieren haben. Wenn keine Kristallbildung ersichtlich ist, kann es durch Kratzen innen induziert werden Wände des Kolbens mit einem Glasstab oder durch das Hinzufügen einer kleinen Impfkristall der gleichen Verbindung. Wenn dies noch nicht funktioniert, dann wahrscheinlich zu viel Lösungsmittel verwendet wurde. Erwärmen der Lösung, erlauben einige des Lösungsmittels aus Kochen, dann abkühlen. (4) zu isolieren und die Kristalle trocknen Legen Sie die kalte Flasche enthält die neu gebildeten Kristalle auf einem Benchtop. Decken Sie leicht die Flasche um Verdunstung zu verhindern und zu verhindern, dass Staub in die Lösung fallen. Isolieren Sie die Kristalle durch Vakuumfiltration mit Büchner oder Hirsch Trichter (Klemme der Kolben zu einem Ring stehen zuerst). Spülen Sie die Kristalle auf den Büchner-Trichter mit einer kleinen Menge von frischen, kalten Lösungsmittel (die gleichen Lösungsmittels für Rekristallisation) um eventuelle Verunreinigungen zu entfernen, die auf die Kristalle stecken kann. Um die Kristalle zu trocknen, lassen Sie sie in den Trichtereinsatz und ziehen Sie Luft durch sie für einige Minuten. Kristalle können auch luftgetrocknet werden, indem sie sich für mehrere Stunden oder Tage unbedeckt stehen. Eine effizientere Methoden gehören Vakuumtrocknung oder Platzierung in den Exsikkator gestellt. Polares Lösungsmittel Weniger polares Lösungsmittel Ethylacetat Hexan Methanol Methylenchlorid Wasser Ethanol Toluol Hexan Tabelle 1. Allgemeine Lösungsmittel Paare.

Results

An example of the results of recrystallization is shown in Figure 2. The yellow impurities present in the crude compound have been removed, and the pure product is left as an off-white solid. The purity of the recrystallized compound can now be verified by nuclear magnetic resonance (NMR) spectroscopy or, if it is a compound with a published melting point, by how similar its melting point is to the literature melting point. If necessary, multiple recrystallizations can be performed until the purity is acceptably high.

Figure 2
Figure 2. 2a) A crude compound (left), 2b) recrystallized product before filtration (middle), and 2c) the same compound after recrystallization (right).

Applications and Summary

Recrystallization is a method of purifying a compound by removing any impurities that might be mixed with it. It works best when the compound is very soluble in a hot solvent, but very insoluble in the cold version of the same solvent. The compound must be a solid at room temperature. Recrystallization is often used as a final clean-up step, after other methods (such as extraction or column chromatography) that are effective at removing larger amounts of impurities, but that do not raise the purity of the final compound to a sufficiently high level.

Recrystallization is the only technique that can produce absolutely pure, perfect single crystals of a compound. These crystals can be used for X-ray analysis, which is the ultimate authority in determining the structure and three-dimensional shape of a molecule. In these cases, the recrystallization is allowed to proceed very slowly, over the course of weeks to months, to allow the crystal lattice to form without the inclusion of any impurities. Special glassware is needed to allow the solvent to evaporate as slowly as possible during this time, or to allow the solvent to very slowly mix with another solvent in which the compound is insoluble (called antisolvent addition).

The pharmaceutical industry also makes heavy use of recrystallization, since it is a means of purification more easily scaled up than column chromatography.3 The importance of recrystallization in industrial applications has triggered educators to emphasize recrystallization in the laboratory curriculum.4 For example, the drug Stavudine, which is used to reduce the effects of HIV, is typically isolated by crystallization.5 Often, molecules have multiple different crystal structures available, so it is necessary for research to evaluate and understand which crystal form is isolated under what conditions, such as cooling rate, solvent composition, and so forth. These different crystal forms might have different biological properties or be absorbed into the body at different rates.

A more common use of recrystallization is in making rock candy. Rock candy is made by dissolving sugar in hot water to the point of saturation. Wooden sticks are placed into the solution and the solution is allowed to cool and evaporate slowly. After several days, large crystals of sugar have grown all over the wooden sticks.

Disclosures

  1. Mayo, D. W.; Pike, R. M.; Forbes, D. C., Microscale organic laboratory : with multistep and multiscale syntheses. 5th ed.; J. Wiley & Sons: Hoboken, NJ, p xxi, 681 p (2011).
  2. Armarego, W. L. F.; Chai, C. L. L., Purification of laboratory chemicals. 5th ed.; Butterworth-Heinemann: Amsterdam ; Boston; p xv, 609 p (2003).
  3. Ray, P. C.; Tummanapalli, J. M. C.; Gorantla, S. R., Process for the large scale production of Stavudine. Google Patents: (2011).
  4. Hightower, T. R.; Heeren, J. D., Using a Simulated Industrial Setting for the Development of an Improved Solvent System for the Recrystallization of Benzoic Acid: A Student-Centered Project. Journal of Chemical Education 83 (11), 1663 (2006).
  5. Rohani, S.; Horne, S.; Murthy, K., Control of Product Quality in Batch Crystallization of Pharmaceuticals and Fine Chemicals. Part 1: Design of the Crystallization Process and the Effect of Solvent. Organic Process Research & Development 9 (6), 858-872 (2005).

References

  1. Mayo, D. W.; Pike, R. M.; Forbes, D. C., Microscale organic laboratory : with multistep and multiscale syntheses. 5th ed.; J. Wiley & Sons: Hoboken, NJ, p xxi, 681 p (2011).
  2. Armarego, W. L. F.; Chai, C. L. L., Purification of laboratory chemicals. 5th ed.; Butterworth-Heinemann: Amsterdam ; Boston; p xv, 609 p (2003).
  3. Ray, P. C.; Tummanapalli, J. M. C.; Gorantla, S. R., Process for the large scale production of Stavudine. Google Patents: (2011).
  4. Hightower, T. R.; Heeren, J. D., Using a Simulated Industrial Setting for the Development of an Improved Solvent System for the Recrystallization of Benzoic Acid: A Student-Centered Project. Journal of Chemical Education 83 (11), 1663 (2006).
  5. Rohani, S.; Horne, S.; Murthy, K., Control of Product Quality in Batch Crystallization of Pharmaceuticals and Fine Chemicals. Part 1: Design of the Crystallization Process and the Effect of Solvent. Organic Process Research & Development 9 (6), 858-872 (2005).

Transcript

Recrystallization is a purification technique for solid compounds.

To perform recrystallization, an impure solid compound is mixed with hot solvent to form a saturated solution. As this solution cools, the solubility of the compound decreases, and pure crystals grow from solution.

Recrystallization is often used as a final step after other separation methods such as extraction, or column chromatography. Recrystallization may also be used to separate two compounds with very different solubility properties. This video will illustrate solvent selection for recrystallization, purification of an organic compound from solution, and will introduce a few applications in chemistry.

Crystallization begins with nucleation. Solute molecules come together to form a stable small crystal, which is followed by crystal growth. Nucleation occurs faster on nucleation sites such as seed crystals, scratches, or solid impurities than spontaneously in solution. Agitation may also encourage rapid nucleation. However, rapid growth can lead to incorporation of impurities if not grown in optimal conditions.

The solubility of a compound tends to increase with temperature, and is highly dependent on the choice of solvent. The greater the difference in solubility at high and low temperature, the more likely it is for the solute to come out of the solution as it cools, and form crystals.

The solvent chosen should have a boiling point of at least 40 °C so there is a significant temperature difference between boiling and room temperature. The solvent’s boiling point must also be below the melting point of the solute to enable crystallization. Rapid cooling of the solution induces the formation of many nucleation sites, thus favors the growth of many small crystals. However, slow cooling induces the formation of fewer nucleation sites, and favors larger and purer crystals. Thus, slow cooling is preferred.

Additionally, a solvent can be selected to minimize impurities. If a solution impurity is more soluble than the solute itself, it can be washed off of the fully formed crystals with cold solvent. However, if an impurity is less soluble, it will crystalize first, and can then be filtered out of the heated solution, prior to recrystallization of the solute.

If no single solvent has the necessary properties, a mixture of solvents can be used. For a solvent pair, the first solvent should readily dissolve the solid. The second solvent must have a lower solubility for the solute and be miscible with the first solvent. Common solvent pairs include ethyl acetate and hexane, toluene and hexane, methanol and dichloromethane, and water and ethanol.

Now that you understand the principles of recrystallization, let’s go through a procedure for purification of an organic compound by recrystallization.

To begin this procedure, place 50 mg of the sample in a glass test tube.

Add 0.5 mL of room temperature solvent. If the compound dissolves completely, the solubility in the cold solvent is too high to be used for recrystallization. Otherwise, heat the mixture in the test tube to boiling.

If the compound does not dissolve completely in the boiling solvent, heat another portion of solvent to boiling. Add the boiling solvent dropwise to the test tube until the solid dissolves completely or until the test tube contains 3 mL of solvent. If the solid still does not dissolve, then its solubility in this solvent is too low.

Confirm that impurities are either insoluble in the hot solvent so they can be filtered out after dissolution or soluble in the cold solvent so they remain in solution after recrystallization is complete. If a solvent meets all criteria, it is suitable for recrystallization.

To start recrystallization, heat the solvent to boiling on a hot plate in an Erlenmeyer flask with a stir bar. Place the compound to be recrystallized in another Erlenmeyer flask at room temperature.

Next, add a small portion of hot solvent to the compound. Swirl the mixture in the flask and then place it on the hot plate as well. Repeat this process until the sample has completely dissolved or until addition of solvent causes no further dissolution.

Add a 10% excess of hot solvent to the solution to account for evaporation. Place filter paper in a Büchner funnel setup. Filter the solution to remove insoluble impurities. If crystals form during filtration, dissolve them with drops of hot solvent.

Cool the solution on the benchtop. Cover the flask to prevent solvent loss to evaporation and to keep particulates out of the solution.

Leave the flask undisturbed until it has cooled to room temperature. Agitation during cooling may cause rapid crystallization, yielding less pure crystals. If no crystal formation is evident upon cooling, induce crystallization by gently scratching the inside walls of the flask with a glass rod or adding a small seed crystal of the compound being recrystallized.

If crystal formation cannot be induced, reheat the solution to boil off some of the solvent, and then cool the solvent to room temperature once more.

Once crystals have formed, prepare an ice bath. Keeping the solution covered, cool the solution in the ice bath until crystallization appears to be complete.

Clamp a filtration flask to a ring stand and connect the flask to a vacuum line. Set a Büchner funnel and adapter in the mouth of the flask.

Pour the mixture of solution and crystals into the funnel and begin vacuum filtration. Rinse any crystals remaining in the flask into the funnel with cold solvent. Wash the crystals on the funnel with cold solvent to remove soluble impurities.

Continue drawing air through the funnel to dry the crystals and then turn off the vacuum pump. If necessary, the crystals may be allowed to stand at room temperature to air dry or placed in a desiccator before storing the crystallized solid.

The yellow impurities present in the crude compound have been removed, yielding an off-white solid. Based on the identity of the compound and the impurities, the purity of the crystals can be verified by NMR spectroscopy, melting point measurements, or visual inspection.

Purification by recrystallization is an important tool for chemical synthesis and analysis.

X-ray crystallography is a powerful characterization technique that identifies the three-dimensional atomic structure of a molecule. This requires a pure single crystal, which is obtained by recrystallization. Some classes of molecules such as proteins are difficult to crystallize, but their structures are extremely important for understanding their chemical functions. With careful selection of recrystallization conditions, even these classes of molecules can be analyzed by X-ray crystallography. To learn more about this process, see this collection’s video on growing crystals for crystallography.

Impure reactants can cause unwanted side reactions. Purifying reactants by recrystallization improves product purity and yield. Once a solid product has been isolated and washed, reaction yield can also be increased by removing volatiles from the filtrate and recrystallizing the product from the resulting solid. Antifreeze proteins, or AFPs, are expressed in many organisms that live in icy environments. AFPs hinder internal ice growth by binding to ice planes, inhibiting recrystallization into larger ice crystals. Different AFPs bind to different types of ice crystal planes. Investigating AFP binding mechanisms involves adsorbing them onto single ice crystals. Proper growth of a single ice crystal is essential for clear and informative results. These proteins have applications from the engineering of cold-resistant crops to cryosurgery.

You’ve just watched JoVE’s introduction to purifying compounds by recrystallization. You should now be familiar with the principles of the technique, a purification procedure, and some applications of recrystallization in chemistry.

Thanks for watching!

Tags

Cite This
JoVE Science Education Database. JoVE Science Education. Purifying Compounds by Recrystallization. JoVE, Cambridge, MA, (2023).