Journal
/
Engineering
/
Fabrication of Ultra-thin Color Films with Highly Absorbing Media Using Oblique Angle Deposition
JoVE Journal
Engineering
A subscription to JoVE is required to view this content.  Sign in or start your free trial.
JoVE Journal Engineering
Fabrication of Ultra-thin Color Films with Highly Absorbing Media Using Oblique Angle Deposition

Fabrication of Ultra-thin Color Films with Highly Absorbing Media Using Oblique Angle Deposition

DOI:
10.3791/56383-v

•

06:30 min

•

August 29, 2017

•

, , ,
1School of Electrical Engineering and Computer Science,Gwangju Institute of Science and Technology, 2Department of Robotics Engineering,Daegu Gyeongbuk Institute of Science and Technology

Chapters

  • 00:05Title
  • 00:56Substrate Preparation and Oblique Angle Deposition of Germanium
  • 03:23Oblique Angle Deposition of Ge on Large Substrates
  • 04:50Results: Ultra-thin Color Films
  • 05:40Conclusion

Summary

Automatic Translation

Automatic Translation

We present a detailed method for fabricating ultra-thin color films with improved characteristics for optical coatings. The oblique angle deposition technique using an electron beam evaporator allows improved color tunability and purity. Fabricated films of Ge and Au on Si substrates were analyzed by reflectance measurements and color information conversion.

Tags

Ultra-thin Color FilmsOblique Angle DepositionPorosity ControlThin Film ColorationOptical Resonance ApplicationsNanofabricationGermanium DepositionTitanium Adhesion LayerGold Reflection Layer

Article

Embed

ADD TO PLAYLIST

Usage Statistics

Related Videos

Fabrication of Nano-engineered Transparent Conducting Oxides by Pulsed Laser Deposition

Formation of Thick Dense Yttrium Iron Garnet Films Using Aerosol Deposition

Indirect Fabrication of Lattice Metals with Thin Sections Using Centrifugal Casting

A Fabrication Method for Highly Stretchable Conductors with Silver Nanowires

Electrospray Deposition of Uniform Thickness Ge23Sb7S70 and As40S60 Chalcogenide Glass Films

Fabrication of Periodic Gold Nanocup Arrays Using Colloidal Lithography

Preparation of Large-area Vertical 2D Crystal Hetero-structures Through the Sulfurization of Transition Metal Films for Device Fabrication

Experimental Methods for Spin- and Angle-Resolved Photoemission Spectroscopy Combined with Polarization-Variable Laser

Fabricating Reactive Surfaces with Brush-like and Crosslinked Films of Azlactone-Functionalized Block Co-Polymers

Fabrication of Soft Pneumatic Network Actuators with Oblique Chambers

Read Article