カウントと培養細胞の生存率の決定

Biology

Your institution must subscribe to JoVE's Biology section to access this content.

Fill out the form below to receive a free trial or learn more about access:

Welcome!

Enter your email below to get your free 10 minute trial to JoVE!





We use/store this info to ensure you have proper access and that your account is secure. We may use this info to send you notifications about your account, your institutional access, and/or other related products. To learn more about our GDPR policies click here.

If you want more info regarding data storage, please contact gdpr@jove.com.

 

Summary

培養中の細胞の数を決定することは培​​養条件の標準化と正確な定量実験を行う際に重要です。このビデオでは、我々は、細胞を血球計を使用してカウントしている方法を示しています。

Cite this Article

Copy Citation | Download Citations

Ricardo, R., Phelan, K. Counting and Determining the Viability of Cultured Cells. J. Vis. Exp. (16), e752, doi:10.3791/752 (2008).

Please note that all translations are automatically generated.

Click here for the english version. For other languages click here.

Abstract

培養中の細胞の数を決定することは培​​養条件の標準化と正確な定量実験を行う際に重要です。血球計算盤は、カウント室として設計された中央部分と厚いガラスのスライドです。細胞懸濁液は、定義された領域に適用され、細胞密度が計算できるようにカウントされます。

Protocol

この実験的なアプローチのための完全なテキストのプロトコルでは、利用可能です細胞生物学におけるカレントプロトコール

Subscription Required. Please recommend JoVE to your librarian.

Comments

9 Comments

  1. I think it would be helpful if you provided links to related protocols (such as for passaging cells, as referenced in the protocol). For example, have a "Related protocols" section with direct links to them.

    Reply
    Posted by: Anonymous
    June 29, 2008 - 4:32 PM
  2. If  I take ²00microliter.spin it down  and resuspended in ²0 microliter then should I divide result by 10 ? Is that right?

    Reply
    Posted by: Anonymous
    August 2, 2008 - 11:55 PM
  3. If you are talking about the concentration of cells in suspension, then no, you multiply by ten.  When you decrease the volume by a factor of ten, then you are concentrating cells and should increase the concentration by a factor of ten.  

    Reply
    Posted by: Anonymous
    August 3, 2008 - 9:58 AM
  4. I thought it's the opposite.Let's say if you dilute the cells 10x won't you multiply by 10 and it should be the oppsite in concentrating?

    Reply
    Posted by: Anonymous
    August 3, 2008 - 5:32 PM
  5. Divide by 10 since you have made the solution more concentrated than it actually is.

    Reply
    Posted by: Anonymous
    March 10, 2010 - 10:10 AM
  6. So let's make sure we are talking about the concentration of cells, which is what you get after counting them.   concentration of your cells is defined as equal to the # cells/ unit volume.  so, if you spin down your cells, which were at ²00 microliters, and then resuspend in ²0 (thereby decreasing the volume by a factor of 10) you can multiply the concentration by a factor of 10 (because they are inversely proportional as the definition states).  Or if you feel like being fancy multiply ²00 microliters, which is in the denominator by 0.1 (because ²0 is a 10th of ²00).  when you dilute cells you are doing the opposite, increasing the volume that contains a fixed # of cells will lower the concentration, because in your example you are multipling the volume (in the denominator) by a factor of 10.  divide the concentration by 10.

    Reply
    Posted by: Anonymous
    August 3, 2008 - 8:14 PM
  7. Overflowing the center posts when you are loading the cell suspension into the hemacytometer results in liquid flowing over and cells staying behind, so that the count is artificially raised.    The cell suspension loaded onto the stage area (usually about 10-15 uL) should only be allowed to flow (in one swoop, not in jerks as shown) to cover the counting surface, then stopped so that liquid dŒs not overflow into the side wells.   This technique as shown is less than desirable.    

    Reply
    Posted by: Anonymous
    October 21, 2008 - 12:12 PM
  8. maintenance of THP-1 monocyte cell line and can they be used for anti-inflammatory studies  

    Reply
    Posted by: Anonymous
    March 9, 2009 - 9:52 AM
  9. I agree with C. Kolar in his/her comment about not letting the liquid overflow; although it requires some manual sensitivity for not pushing too hard the micropipette plunger, it is something everybody should learn how to do. I would like to make some suggestions to improve the work. First, I would invite authors to consider and discuss subjectivity in this type of cell counting; sometimes it is very subjective to decide how blue a cell should be to be considered dead;. In second place, letting the cells 5 minutes into the trypan blue solution might lead to cell death (and therefore decreased cell viability) if not properly stored; so this time should be standardize for every cell type. The authors also should consider explaining the remaining cell counting area, not just the central part. Some people consider the remaining 4 zones of 1 square mm for cell counting and use all of them to get an average instead of one single value from the central zone.   When calculating the cell concentration, the authors do not explain why the "10.000" appears in the formula (just the product of 1 square millimeter (area) and 0.1 mm (height of the chamber)), and what is considered as dilution...I believe an example would be very helpful to explain this aspect and is missing from the presentation.     

    Reply
    Posted by: Ruben G.
    March 23, 2009 - 7:26 PM

Post a Question / Comment / Request

You must be signed in to post a comment. Please or create an account.

Usage Statistics