Cultivo primario de neuronas del hipocampo de ratas recién nacidas P0

JoVE Journal
Biology

Your institution must subscribe to JoVE's Biology section to access this content.

Fill out the form below to receive a free trial or learn more about access:

 

Summary

La disección y el crecimiento de las células de un área del cerebro individuales facilita la investigación de los parámetros celulares y fisiológicos. Se describe un método para el cultivo de células primarias que produce neuronas enriquecido las culturas en un ambiente libre de suero.

Cite this Article

Copy Citation | Download Citations | Reprints and Permissions

Nunez, J. Primary Culture of Hippocampal Neurons from P0 Newborn Rats. J. Vis. Exp. (19), e895, doi:10.3791/895 (2008).

Please note that all translations are automatically generated.

Click here for the english version. For other languages click here.

Abstract

Las propiedades fisiológicas de las neuronas del hipocampo son comúnmente investigados, sobre todo debido a la participación del hipocampo en la memoria y el aprendizaje. Cultivo de células primarias del hipocampo permite neurocientíficos para examinar la actividad y las propiedades de las neuronas en la celda individual y el nivel de sinapsis individuales. En este video, vamos a demostrar cómo aislar y cultivar células primarias del hipocampo de ratas recién nacidas. El hipocampo puede ser aislado de cada animal recién nacido en tan corto como 2 a 3 minutos, y los cultivos se pueden mantener hasta por dos semanas. También vamos a demostrar brevemente cómo utilizar estas neuronas del hipocampo de imágenes de calcio radiométrica. Aunque este protocolo describe el proceso para el hipocampo, con poca o ninguna modificación, se puede aplicar a otras regiones del cerebro.

Protocol

Antes del aislamiento del hipocampo

Antes de comenzar el aislamiento del hipocampo, asegúrese de que todas las herramientas que son estériles. Aerosol por la campana de la cultura con el 70% de etanol, y el lugar de las herramientas dentro de la campana. Usted tendrá 6 - y 10 cm de placas de Petri estériles de poli-L cubreobjetos de vidrio recubierto, pipetas y puntas, pipetas desechables, y una pipeta de electricidad. A partir de ahora, no olvides utilizar una técnica estéril correcta.

  1. A su vez en el baño de agua y asegurarse de que se calienta a 37 ° C.
  2. Las siguientes soluciones que se almacenan a 4 º C será necesario:
    • Medio modificado de Eagle (MEM)
    • Neurobasal
    • Solución salina tamponada de Hank (HBSS)
    • Borato de solución tampón
    • Piruvato sódico
    • Esterilizada por filtración de glucosa en solución al 20% en agua destilada

    • Asegúrese de que la fumigación de todas las botellas hacia abajo con etanol al 70% antes de colocarlos en el capó.

  3. Tome estas soluciones congeladas del congelador y colóquelos en un baño de agua caliente:
    • Una alícuota de 5 ml de suero de caballo
    • A 1 ml de alícuota de B-27 suplemento
    • A 1 ml de alícuota de 100 veces con antibióticos (penicilina y estreptomicina)
    • Y una alícuota de 0,5 ml de L-glutamina
  4. Después de las soluciones se han descongelado, los saca del baño de agua, aerosol hacia abajo con etanol al 70%, y colocarlos en la campana. Ahora el medio de planchas y Neurobasal se puede preparar.
  5. Después de las soluciones se preparan, tapa de los recipientes bien y ponerlos en la 37 ° C baño para calentar mientras se realiza el aislamiento del hipocampo.
  6. Además, tomar una alícuota de la proteasa tripsina (2,5%) del congelador y colocarlo en el baño de agua. Tripsina se digieren en el hipocampo disecado, que se aisló en el siguiente paso.
  7. Tome un tubo cónico de 15 ml, llenar con HBSS, y la etiqueta con el grupo de tratamiento. Es aquí donde aisladas hipocampo se recogerán en el próximo paso.

Aislamiento del hipocampo

  1. Para comenzar el aislamiento del hipocampo, asegúrese de que los cachorros recién nacidos son limpios y que sus bandas de leche, placentas y cordones umbilicales retirado por su madre.
  2. Lugar a los cachorros en una placa Petri, rocíe con el 70% de etanol para limpiar y colóquelos en la campana. Los animales son sacrificados inmediatamente antes de cultivar.
  3. Para la esterilización de más tener un cachorro de la antena, introduzca el perrito en etanol al 70%, y luego en dos lavados de HBSS estéril.
  4. Quite la cabeza del cuerpo con unas tijeras. Utilizando la misma tijera, cortar la piel y el cráneo.
  5. Con un par de pinzas finas, pelar la cabeza fuera del cerebro y el lugar del cerebro en una pequeña placa de Petri que contiene una pequeña cantidad de HBSS estéril.
  6. Pele los hemisferios cerebrales. El hipocampo es un pequeño caballito de mar en forma de estructura en el lóbulo temporal medial.
  7. Quitar el hipocampo y el lugar en 3 ml de HBSS en un tubo de 15 ml. Repita estos pasos con cada cachorro, y el lugar de cada hipocampo aislado en el tubo de 15 ml. Ahora, es hora de disociar el tejido de las células individuales.

Hipocampo disociación celular

  1. Después de todo hipocampo han sido aislados, llenar el tubo de 15 ml a 4,5 ml con HBSS.
  2. Retire la tripsina del baño de agua, rociar con etanol, y el lugar en el capó. Añadir 0,5 ml de tripsina en el tubo, y se incuba durante 15 minutos a 37 ° C.
  3. En la capilla, se retira la solución HBSS / tripsina del tubo con una pipeta estéril, teniendo cuidado de no molestar a los hipocampos que han depositado en el fondo del tubo. Añadir 5 ml de HBSS en el tubo y agitar. Se incuba a 37 ° C durante 5 minutos.
  4. Repita este paso dos veces, la eliminación de la HBSS viejo y reemplazarlo con solución nueva.
  5. Tomar una alícuota de DNasa I del congelador. Añadir 0,5 ml de DNasa para los hipocampos en 4,5 ml HBSS. La DNAsa se añade a promover la inactivación de la enzima.
  6. Triturar la solución (o una pipeta de arriba a abajo) hasta que esté homogéneo. Tenga cuidado de no introducir burbujas en el homogeneizado.
  7. Determinar la viabilidad celular con el método de exclusión con azul de tripano.
  8. Tome una cápsula de Petri de 10 cm que contiene 6-8 cubreobjetos, y se añaden 10 ml de medio de recubrimiento. Pipeta el número deseado de células de la cápsula que contiene el cubreobjetos. Hágalo girar suavemente para dispersar las células, y asegúrese de que el cubreobjetos no se superpongan.
  9. Permiten a las células para conectar de 2-4 horas en un humidificado incubadora a 37 ° C con 5% de CO 2. Después de confirmar que las células son viables y se ha fijado, la transferencia de los cubreobjetos de platos que contienen medio Neurobasal. Colocar los platos de nuevo en la incubadora.
  10. Una vez a la semana, cambie un tercio de la media con un nuevo medio Neurobasal y tratamientos experimentales, según sea necesario. Ahora, las propiedades funcionales de estas células en cultivo están listos para ser estudiados.

Fura-2 Calcio imágenes de las neuronas del hipocampo

  1. Después de las neuronas del hipocampo cultivadas han sido in vitro durante 48 horas (pero no antes), los experimentos de imagen de calcio puede comenzar. En este punto, estas neuronas se han comenzado a ampliar los procesos. El rango de edad óptima para imágenes de calcio es a partir del día in vitro 3 a 7.
  2. Culturas de carga con Fura-2 AM para 30 minutos a 37 ° C, después de lo cual se pueden visualizar en un objetivo de 20X con una lámpara de arco de xenón para excitar el tinte indicador de calcio y de 512 bits cámara CCD, que se toman muestras cada 150 ms.

Subscription Required. Please recommend JoVE to your librarian.

Discussion

Este protocolo fue desarrollado como una modificación de los trabajos seminales de Gary Banker y Kim Goslin 1. Este libro es un recurso esencial para cualquier persona interesada en el cultivo de células - no sólo los cultivos de neuronas enriquecido se describe en el protocolo actual.

Los tres factores más importantes en el cultivo de la célula son: la esterilidad, la velocidad, la elección del medio utilizado.

Esterilidad - un flujo laminar / campana estéril, las condiciones de asepsia, y una incubadora de estériles son obligatorios. La contaminación en cualquiera de los pasos es perjudicial no sólo para el actual experimento que está trabajando, sino también el trabajo posterior que se han planificado. Después de una incubadora se contamina, puede tomar semanas (o meses) para limpiarla y estéril. La contaminación, aunque no evidente de inmediato a un nivel visible, sin duda afectará a la viabilidad celular y la fisiología celular. La esterilidad es un imperativo.

Velocidad - la salud de las células en cultivo está fuertemente ligado a la cantidad de tiempo que las células no están en un ambiente y medio ambiente. Por lo tanto, es esencial que la cantidad de tiempo necesario para eliminar las células de los animales hasta que las células se encuentran en el medio de recubrimiento está en un mínimo. Debido a que muchas medidas no pueden ser alterados (tiempo de incubación de la tripsina o lavado de ser), lo que se puede modificar es la cantidad de tiempo necesario para eliminar las células del cerebro. La práctica de la disección a menudo. La cantidad de tiempo necesario para que este paso tiene que ser reproducibles.

Elección del medio - hay numerosos medios de propiedad, uno de los cuales se Neurobasal. Antes de los días de la utilización de medio Neurobasal, gliales acondicionado (que debía hacerse por separado - esto se discute en el libro de Banker y Goslin 1) era necesario. No obstante, es importante que usted sepa lo que está en el medio que se está utilizando. Junto con Neurobasal, un suplemento como el B-27 se utiliza a menudo. Asegúrese de que los componentes de estos medios y los suplementos son conocidos, ya que puede afectar las propiedades de las células. Es una práctica habitual en mi laboratorio para el uso libre de suero / carbón despojado / fenol medio libre de rojo para evitar que las hormonas esteroides (dado que una gran parte de los trabajos realizados en mi laboratorio investiga las acciones de las hormonas esteroides). Este concepto - saber lo que está en las soluciones que está utilizando - es fundamental para todas las etapas de cultivo de células.

Subscription Required. Please recommend JoVE to your librarian.

Acknowledgments

JLN fue apoyada por MH 68347.

Materials

Name Company Catalog Number Comments
Antibiotic antimitotic Invitrogen 15240062
B-27 Supplement Invitrogen 17504044 Serum free
Boric Acid Sigma-Aldrich B6768
Dnase I Sigma-Aldrich DN25
Fura-2, AM cell permeant Molecular Probes, Life Technologies F1221
Glucose Sigma-Aldrich G7528
HBSS (10X) Invitrogen 14185052
HEPES Invitrogen 15630080
L-Glutamine Sigma-Aldrich G7513
MEM Invitrogen 51200038
Neurobasal Invitrogen 12348017 Without phenol red
Poly-L-Lysine Hydrobromide Sigma-Aldrich P6282
Pyruvic Acid Sigma-Aldrich P2256
Sodium Pyruvate Sigma-Aldrich P2256
Sodium Tetraborate Sigma-Aldrich
Trypsin, 2.5% (10X) Invitrogen 15090046

DOWNLOAD MATERIALS LIST

References

  1. Banker, G., Goslin, K. Culturing Nerve Cells, 2nd Edition. The MIT Press. (1998).

Comments

45 Comments

  1. Thank you very much for this vedio. I'd want to know how to get rid of  the debris and trash after the enzyme treatment since they are always abundant in the plate and end with ruining the neurons I need.Thanks!

    Reply
    Posted by: Anonymous
    September 30, 2008 - 11:40 AM
  2. I am not sure what enzyme treatment you are refering to. Do you mean the DNase I treatment (step 5)? If you remember, the cells are first plated in plating medium (in a large dish), then moved to smaller, individual dishes that contain the Neurobasal + medium. So if you have trash and debris during the plating, that is fine - you transfer the coverslips to another dish. If you are talking about dead cells after the transfer (such as overnight) - they are usually cleaned up by the cultures themselves. Very rarely do I have any debris what-so-ever in my dishes. 

    Reply
    Posted by: Anonymous
    October 3, 2008 - 8:48 AM
  3.   Thank you very much for your reply!

    Reply
    Posted by: Anonymous
    October 6, 2008 - 8:45 AM
  4. Thank you for producing this video - I am beginning to isoalte mouse cortical and hippocampal and found this video very helpful! I have a question regarding the isolation procedure.  Our animal facility where we breed and dissect the mice, and harvest brain tissue, is about 30 min drive to the laboratory facility where we setup and maintain cultures. Given that time is a critical factor, is there a convenient stopping point in the protocol during which I can transport the cells to the lab without incurring excessive cell damage/death? Thanks very much.  

    Reply
    Posted by: Anonymous
    October 6, 2008 - 12:59 PM
  5. As a postdoctoral fellow, I too performed my tissue dissections in a different location than where we had our incubator. Through much trial and error, we found that transporting cells while in step 1 of the Hippocampal Cell Dissociation portion of the protocol (dissociated cells in 4.5ml of HBSS+) was the best. Truth be told - for us, it was a maximum of 15 minutes, transportation time. Thirty minutes may be a bit long, and you may have some cell loss. Other colleagues have placed the cells in the test tube on ice, and they have told me viability was not an issue. But I would first see if your viability is fine without the need for placing the cells on ice. Good luck.

    Reply
    Posted by: Anonymous
    October 7, 2008 - 7:59 AM
  6. Thanks very much for the advice - we'll try that, and drive faster!  ; )

    Reply
    Posted by: Anonymous
    October 8, 2008 - 10:39 AM
  7. After you remove the brain, you should put it in the cold solution that was bobbelld with O² and then place the dish on the ice. That should be ok till you get to your lab and then you can start to disect the brain in the lab.  

    Reply
    Posted by: Anonymous
    October 30, 2008 - 3:24 PM
  8. bubbled with O²? that is going to damage the the brain, oxygen radical... use mannitol in your solution...to chelate free oxygen radicals

    Reply
    Posted by: Anonymous
    September 2, 2009 - 11:10 AM
  9. Too long, try to dissect the rats in the lab

    Reply
    Posted by: Anonymous
    September 2, 2009 - 11:08 AM
  10. If the PDMS can be sterilized using UV light and how to prepare the device before using? thanks

    Reply
    Posted by: Anonymous
    October 9, 2008 - 10:48 PM
  11. First off, I do not know what you are refering to by "PDMS." Do you mean plating medium? HBSS+? Neurobasal+ media? If you mean one of those three - no, sterilizing using UV light is not always effective. We used to use UV, because it is quicker, but had issues with contamination. Buy the items sterile and only use them in a sterile hood. For the items that need to be made, sterile filter to make them sterile. And always use pressure sterilized water. And your second point - "how the prepare the device," what device? When I think of a device, I think of some tool. So I do not know what you are refering to, since no advanced tools are used in this procedure. Please respond back and I will try to answer your questions.  

    Reply
    Posted by: Anonymous
    October 11, 2008 - 10:14 PM
  12. Hi Thanks so much for this informative protocol. I just have a few questions. First, you give an extensive list of all the components needed in the particular media, but do not outline the specifc amounts/conc. of each component that make up each buffer. If you could please post the compostion of each buffer used (i.e., conc of each component in the dissection solution, plating media etc) that would be greatly appreciated! Thanks again!

    Reply
    Posted by: Anonymous
    December 2, 2008 - 4:00 PM
  13. I will do that. HBSS+: 1ml of 1M HEPES, pH 7.3 1ml of 100X antibiotic/antimitotic 10ml of 10X HBSS (calcium and magnesium free) 88ml of sterile water   Plating Medium: 86ml of MEM 10ml of horse serum 3ml of ²0% glucose (sterile filtered) 1ml of 100mM pyruvic acid   Neurobasal+: 1ml of B-²7 supplement 1ml of 100X antibiotic/antimitotic 1²5ul of L-glutamine fill to 50ml with Neurobasal (phenol red free)   I hope that is what you needed. Please let me know if you need anything more. Cheers.

    Reply
    Posted by: Anonymous
    December 5, 2008 - 8:50 AM
  14. Hi: I often have a clumping problem in my mouse hippocampal cultures. Some time after day 5-7 the neurons start getting too close and eventually the soma seem to clumb together. Do you have any idea why this is happening?

    Reply
    Posted by: Anonymous
    March 24, 2009 - 1:19 AM
  15. Clumping has never been an issue in my cultures. Two things come to mine - 1)the coating of the culture dishes/slides. We use pol-L-lysine, and the cells always stayed on well. They have to, because I do ratiometric imaging and purfuse solution across teh tops of the culltures. Maybe in your cultures, the interactive forces sticking the neurons together is stronger than that sticking the neurons to the dishes. ²) Or it could be that what you are seeing are clumps of glia. For some reason, the glial cells tend to clump. I am very sorry that I cannot be more helpful. Maybe you can send me a tiff image. That may allow for a better "diagnosis." 

    Reply
    Posted by: Anonymous
    April 19, 2009 - 10:04 AM
  16.   Dear Dr. Nunez, What is the purpose of the Acid boric? WHere do you use that? Angelo O. Rosa

    Reply
    Posted by: Anonymous
    May 21, 2009 - 9:44 AM
  17. The boric acid is used in making the borate buffer. The borate buffer is used in making the poly-L-lysine solution. Here is the recipe for the borate buffer: 1.²4g boric acid 1.90g sodium tetraborate Add both to 400ml sterile dH²0   The Poly-L-lysine is made by adding 10mg poly-L-lysine to 1ml of the borate buffer. I hope that helps.

    Reply
    Posted by: Anonymous
    May 21, 2009 - 12:11 PM
  18. when i see whether the cells have attached to the coverslip after ².5 hrs of incubation, i notice that majority of the cells do attach but on changing the focus i see that a still large number of cells remain in suspension. On transferring to new culture dish with neurobasal medium, i no longer see those large number of unattached cells, but do see quite a few cells attached to the coverslip. My question is, how do I decide whether I need to let the cells attach for more time?

    Reply
    Posted by: Anonymous
    August 7, 2009 - 6:16 PM
  19. This all depends upon the final density that you are shooting for. For both calcium imaging and Western blot analysis, ².5 hours of time in the plating medium is sufficient. If I plate for 3 hours, the density becomes a little too much for calcium imaging (I like to have some cells separate, and some cells making contacts with one another, and ².5 hours fits this purpose). But I would not go longer than 4 hours - you are probably going to have too high a density of cells. And you can keep the cells in plating medium overnight - some cells will never adhere. Probably because they are dead or just not healthy enough to adhere. But not worries - ².5-3 hours in plating medium is sufficient for most applications.

    Reply
    Posted by: Anonymous
    August 8, 2009 - 12:55 AM
  20. Thank you very much for your prompt response. As you mentioned I use them for calcium imaging and also for immunostaining after transfection, and mRNA isolation.
    Do you also do any treatment to stop the proliferation of glia cells?

    Reply
    Posted by: Anonymous
    August 8, 2009 - 4:27 PM
  21. I use ara-C (cytosine arabinoside) to stop unwanted glial cell proliferation.

    Reply
    Posted by: Anonymous
    August 11, 2009 - 6:46 AM
  22. Dear Dr Nunez,
    What are the differences of a cell culture and a slice hippocampal culture will have on the tissues? Will neurons developed differently? Will neurons grow differently in a cell culture, compared to a slice tissue culture of hippocampus.?DŒs the structure of the hippocampus has any significant impact on neurogenesis and neurons development, compared to cell culture methodology? Thank you.

    Reply
    Posted by: Anonymous
    September 2, 2009 - 11:17 AM
  23. Cell culture has dispersed cells, while the slice culture keeps the connectivity within the hippocampus. Basically, the cell culture is ripping the hippocampus apart, and plating the individual cells, while the slice culture removes the hippocampus as a slice and grows that whole thing in a dish. Yes, neurons will develop differently between the methods - in cell culture, they grow in the absence of their normal neighbors. If you can, I would suggest slice cultures for looking at normal development and neurogenesis. But if you want to see individual cell properties (independent of neighbors), do the cell cultures. I am sure hippocampal development is more altered in the cell cultures. We do not see much neurogenesis in cell culture, but we do see the normal developmental events in the individual neurons (such as GABA-mediated excitation). Both are great tools, and both have their strengths. I hope that helps. Contact me again if you would like further advice.

    Reply
    Posted by: Anonymous
    September 4, 2009 - 9:13 AM
  24. It is really useful to have this video at hand, thank you very much. I wanted to ask about a matter not discussed here.
    I am new to primary neuronal cell cultures and I am interested in buying a CO² incubator. How important is the choice of incubator for the culturing of neurons, any thoughts/advice on the subject? It seems that IR sensor is a must, but when it comes to air jacket vs water jacket, fan no fan, UV vs high temperature decontamination I am lost. Any advice on models/reliable companies would be highly appreciated! Thank you in advance!

    Reply
    Posted by: Anonymous
    June 25, 2010 - 3:55 PM
  25. I know it has been a long time since your response - my apologies. Air vs water jacketed is important in the regulation of temperature. The assumption being that water maintains the temp more efficiently than air. The fan is another item that helps with temp maintenance, especially when you are opening and closing the door to the incubator often. I think a fan is a must, and would prefer water jacketed. I know that UV is more effective - we use UV decontamination in our hoods, and the hood people have never told us that high temps are 100% effective. As for model, I love the VWR I have used. I know that you can spend an arm and a leg. But VWR has been great for us.

    Reply
    Posted by: Anonymous
    March 2, 2012 - 9:36 PM
  26. Thank you very much for this vedio. I am wondering if I know you measure osmolarity of plating media and feeding media?

    Reply
    Posted by: Anonymous
    November 25, 2010 - 1:25 PM
  27. I am sorry, but I have never measured the osmolarity of the plating medium or the culture medium.

    Reply
    Posted by: Anonymous
    November 30, 2010 - 3:12 PM
  28. DR,Joseph.How to avoid the growth of glial cell.Could you tell me how to use ara-C?I was confused.thanks

    Reply
    Posted by: Anonymous
    November 27, 2010 - 1:52 AM
  29. The ara-C, also called cytosine arabinoside, controls glial cell proliferation. This drug affects dividing cells, and since glial cells are really the only thing dividing, it is potent in killing any dividing glial cells. The ara-C can be added after cells have been in culture. Please let me know as to the confusion - do you mean concentration? Vehicle for the ara-C? How often to administer?

    Reply
    Posted by: Anonymous
    November 30, 2010 - 3:18 PM
  30. Thank you for the video. I would like to know protocol to make PDL coated coverslip or dishes. Thanks

    Reply
    Posted by: Anonymous
    January 7, 2011 - 3:35 PM
  31. First rinse the coverslips in dH²O and leave them in nitric acid overnight. Then dip two times in milliQ H²O, and dry in an oven set to 40 degrees. Autoclave the coverslips and allow to cool to room temp. All of the remaining procedures should be performed in a laminar flow hood. Place 4-5 coverslips in a 100mm petri dish. Combine 0.5ml 10X poly-l-lysine and 4.5ml borate buffer. Cover each coverslip with 3-4 drops of the poly-l-lysine/borate buffer solution. place the coverslips overnight in a 37degree C incubator. Rinse twice with sterile H²O. If not using immediately, cover the petri dish with parafilm and store in the fridge for up to one month.

    Reply
    Posted by: Anonymous
    March 2, 2012 - 9:42 PM
  32. HiA²81;
    Thank you very much for your vedio. Neurons initially grow well, but begin to detach and be broken into pieces after day ²-4; no cell survive past 1 week. Do you have any idea why this is happening? Thanks!

    Reply
    Posted by: Anonymous
    May 4, 2011 - 5:45 AM
  33. My guess is that it is a problem with the poly-L coating of the coverslips. You may want to try fresh poly-L, or another method (some people use poly-D-lysine). I have always had survival of at least 10-14 days.

    Reply
    Posted by: Anonymous
    May 4, 2011 - 12:18 PM
  34. Thank you for your reply, maybe I can change the time of coating.

    Reply
    Posted by: Anonymous
    May 6, 2011 - 10:02 AM
  35. What do you mean - change the time of the coating? You mean coat for longer? Or use "fresher" coverslips?

    Reply
    Posted by: Anonymous
    March 2, 2012 - 9:43 PM
  36. Dr. Joseph Nunez, there are several comments regarding you use of Ara-C to control glial growth in your cultures. I have several questions. When do you first treat your cultures with Ara-C? Do you continue to treat with additional Ara-C and how often? What concentration do you use? I have been trying to use Ara-C in my own cultures but this is resulting in extensive debris. Do you have any further suggestions? Thanks!

    Reply
    Posted by: Anonymous
    May 23, 2011 - 3:57 PM
  37. Honestly, I try to avoid using Ara-C as much as I can because of the debris. I use it 4 days after the day of culturing. I use a concentration of 1uM. I do not continue to use it given I only use my cultures for a maximum of 14 days. My suggestion (please don't take this the wrong way) is to make my initial culturing as glial free as possible. So culturing at an earlier embryonic age, using less steroid containing growth factors, etc, has helped me. Sorry I cannot be more helpful.

    Reply
    Posted by: Anonymous
    March 2, 2012 - 9:48 PM
  38. Hi, Thank you very much for the video. I am wondering if I know how you make a DNase solution from the powder?

    Reply
    Posted by: Anonymous
    October 6, 2011 - 11:10 AM
  39. add one vial of DNA powder to 500ul ddH²O

    Reply
    Posted by: Anonymous
    March 2, 2012 - 9:45 PM
  40. Hi, Thank you very much for the video. I am wondering if I know how you make a DNase solution from the powder?

    Reply
    Posted by: Anonymous
    October 6, 2011 - 11:10 AM
  41. Hello,
    A question completely unrelated to the video. Hope you could help.
    I've just begun neuronal culture experiments with chick embryos.
    I isolated the forebrain portion of the embryo from 8-day old eggs, performed a primary neuron culture isolation procedure and have counted the number of viable cells.
    I would like to know, how I would test the efficiency of my protocol/ the neuronal culture done.
    Please do let me know. Any sort of structural recognition I should be doing? How do I go about the same?
    Thanks.
    P.S: Thank you for the video.

    Reply
    Posted by: Anonymous
    October 13, 2011 - 12:30 AM
  42. Not sure what you mean by efficiency, but in my lab we also are culturing CFNs from E8 embryos. You can always compare numbers of trypan blue + versus - neurons on the hemacytometer to get a % of viable cells. A very good prep will get you about 10^7 viable
    neurons per ² chick telencephali hemispheres

    Reply
    Posted by: Anonymous
    January 17, 2012 - 10:36 PM
  43. Dr. Joseph Nunez, glad to see you again, I²16;ve solved my problem. Actually, the death of my cells was caused by dissociation. Maybe the dissociation is not enough, so I pipetted up and down so strongly,and
    this may hurt the cell.

    Reply
    Posted by: Anonymous
    March 5, 2012 - 12:39 AM
  44. A very helpful video protocol. One question, is it ok if we cut the heads of the pups and bring them to culture room. This kind of transportation will take 15 minute, and then isolate the hipocampus for cell or tissue culturing. Instead of isolating the hippocampus straight after choppiing head in the animal facility.

    Reply
    Posted by: Farah S.
    August 21, 2012 - 4:55 AM
  45. What you mentioned was how I (as a postdoc) used to culture when the location of our animal colony, lab and culture room were far from one another. While the best choice is to have the shortest time interval between euthanasia/brain removal and culturing, we had consistently high numbers of viable cells with the method you suggest.

    Reply
    Posted by: Joseph N.
    August 22, 2012 - 10:26 AM

Post a Question / Comment / Request

You must be signed in to post a comment. Please or create an account.

Usage Statistics