동물의 희생까지 생체 내에서 엔드 – 투 – 엔드 문합 및 실시간 디지털 평가를 사용하여 양의 경동맥에 조직 설계된 선박 (TEVs)의 상호 위치 배치를위한 단계별 프로토콜입니다.
혈관 조직 엔지니어링 (TEVs)의 발전 능력에 의해 전진 큰 동물 모델로 일상적 효과적으로 임플란트 TEVs (직경 4-5 mm)의 것이다. TEV 및 기본 경동맥의 TEV 및 실시간 디지털 평가의 상호 위치 배치를위한 단계로 단계 프로토콜은 여기에 설명되어 있습니다. 생체 모니터링이 가능하게된다 흐름 프로브, 카테터 및 초음파 결정의 주입 (수로 수술시의 주입 TEVs 네이티브 경동맥) 직경의 동적 변화를 기록. 일단 연구자는 맥파 속도, 증가 지표, 맥압 컴플라이언스와 같은 파라미터를 산출 동맥 혈류 패턴, 침습적 혈압 및 동맥 직경을 계산할 수 주입. 데이터 수집 실험 기간에 걸쳐 분석을 위해 하나의 컴퓨터 프로그램을 이용하여 달성된다. 이러한 귀중한 데이터가 TEV 매트릭스 리모델링에 대한 통찰력을 제공하고, 그 resemblan기본 / 가짜 제어 및 생체 내에서 전체 TEV 성능 CE.
TEVs의 개발을위한 주요 초점은자가 선박을 이용할 수없는 경우에자가 이식 교체에 대한 대체를 제공하기 위해 기증자 시력 이환율을 제한하고있다. 예를 들어 연간 관상 동맥 우회 수술의 수 USA 350,000을 초과하고, 적합한 이식 이상적인 소스는 관상 동맥과 정맥 절편 한 하행 동맥 좌측 내유동, 좌전 남아있다. 혈관 질환으로 고생 많은 개인이자가 이식 교체에 적합 동맥과 정맥이 없을 수 있기 때문에, TEVs의 개발은 이렇게 수십 년 1-6에 대한 연구의 강렬한 분야가되었다. 소설 TEVs의 엔지니어링 및 최적화 자체는 강렬한 토론의 주제되지 않았습니다 TEVs을 이식하기 위해 사용 수술 기법에 대한보고, 많은 발전을받은 상태. 오히려, 동물 모델에 TEVs의 주입에 관한 프로토콜은 크게 남아 있습니다연구자 조회입니다.
다음 원고 단단 문합술 접근법을 이용하여 TEVs를 이식하는 방법을 보여준다. 이 절차는 종 방향의 장력과 생체 모니터링 장비의 추가 최적화 봉합 기술을 안정화 문합 봉합 특정 패턴을 사용하여 최적화되었다. 이 방법은 이전에 사용 된 많은 변화들과 대조된다. 또한,이 절차는 동맥 혈압, TEV 직경 / 준수 등의 매개 변수를 획득하고 적출까지 수술까지 한 후 TEV를 통해 유량을하는 방법에 대해 설명합니다. 이 리모델링 과정에있는 동안이 데이터 수집 TEV의 불가결 분석을 제공한다.
이 보고서의 목적은 양의 경동맥 관심 임플란트 TEVs으로 신뢰성 있고 재현 가능한 절차를 제공하는 것이다. 이 모델에서 사용 된 동물의 네이티브 경동맥은 0.5-0.75 mm 두께 및 바깥 지름이 4.5-5 mm이었다. 여기에 설명 된 수술 기법은 3 개월 기간, 의도 된 종점까지 효과가 입증 두께의 0.25-1 mm, 외부 직경 4-5mm 큰 성공의 길이가 4cm를 측정하는 다양한 형상의 TEVs을 주입에 대한 성공했다. 이 수술 ?…
The authors have nothing to disclose.
이 작품은 국립 심장 및 폐 연구소 (R01 HL086582)와 뉴욕 줄기 세포 과학 기금 (NYSTEM, 계약 # 보조금에 의해 지원되었다 STA와 존 나이 퀴 스트 완료 한 조브 비디오에 사용 된 DDS 그림을 C024316); 버팔로 뉴욕 주립 대학에서 의학 일러스트 레이터.
Equipment | Manufacturer | Serial/Catalog # | Notes | |
Pressure Transducer | Becton Dickinson | P23XL-1 | 1+ (1 for each artery) Used with water-filled diaphragm domes |
|
Amplifier and transducer box | Gould | 5900 Signal Conditioner Cage | 1 Two transducers and amplifiers should be included in cage. While this specific unit may be discontinued, other commercially available pressure transducers with a BNC/analog output will communicate with the Sonometrics equipment |
|
T403 Console with TS420 perivascular flowmeter module(x2) | Transonic Systems | T403 module and TS420 (x2) | 1 Flow probes measuring flow through each of the carotid arteries will connect to each of the TS420 units. |
|
Digital ultrasonic measurement unit | Sonometrics | TR-USB | 1 | |
Flow Probe Precision S-Series 4mm | Transonic Systems Inc. | MC4PSS-LS-WC100-CM4B-GA | 2 | |
1mm Sonometrics Crystals | Sonometrics Systems | 1R-38S-20-NC-SH | 2-4 (2 for each artery) | |
Catheter for implantation | BD (Becton Dickinson) | 381447 | 1+ (1 for each artery) Catheter is cut and secured to microbore tubing, stylette is utilized for insertion |
|
Tygon Microbore Tubing | Norton Performance Plastics | (AAQ04127) Formulation S-54-HL | NA (cut to length for an extension set) | |
Luer Stub Adapter | BD (Becton Dickinson) | 427564 (20 gauge) | 1+ (1 for each arterial catheter) | |
Surflo Injection Plug | Terumo | SR-IP2 | 1+ (1 for each arterial catheter) | |
Meadox | PTFE (Teflon) Felt | 19306 | NA (cut to size) The PTFE felt used in our studies was discontinued. However, comparable companies such as “Surgical Mesh” offer products which are equivalent. |