Login processing...

Trial ends in Request Full Access Tell Your Colleague About Jove

18.4: Standard Electrode Potentials

JoVE Core

A subscription to JoVE is required to view this content. Sign in or start your free trial.

Standard Electrode Potentials

18.4: Standard Electrode Potentials

On comparing the reactivity of silver and lead, it is observed that the two ionic species, Ag+ (aq) and Pb2+ (aq), show a difference in their redox reactivity towards copper: the silver ion undergoes spontaneous reduction, while the lead ion does not. This relative redox activity can be easily quantified in electrochemical cells by a property called cell potential. This property is commonly known as cell voltage in electrochemistry, and it is a measure of the energy which accompanies the charge transfer. Potentials are measured using the SI unit Volts, defined as one joule of energy per one coulomb of charge. Thus,


Standard Electrode Potential

When measured for electrochemical purposes, the cell potential is a measure of the driving force for a specific type of charge transfer processes, namely, the electron transfer between reactants. The potential of a single electrode or a single half-cell cannot be measured as electron transfer requires a donor and recipient or a reductant and an oxidant, respectively. Instead, a half-cell potential can only be measured relative to another half-cell. Thus, it is only possible to measure the difference in potential between two half-cells, Ecell, which is defined as


where Ecathode and Eanode represent the potentials of two different half-cells functioning as cathode and anode, respectively. The standard cell potential, E°cell, is the cell potential measured at standard-state conditions of both half-cells ( i.e., 1 M concentrations, 1 bar pressures, 298 K)


To easily calculate half-reaction potentials, the scientific community has designated one particular half-cell to serve as a universal reference for all cell potential measurements, with a potential of 0 V. This half-cell is known as the standard hydrogen electrode (SHE), and it is based on the half-reaction below:


Typically, SHE consists of an inert platinum electrode which is immersed in 1 M aqueous H+, with a stream of bubbling H2 gas at 1 bar pressure, maintained at a uniform temperature of 298 K. The electrode potential (EX) for a half-cell X is thus defined as the potential measured for a cell X, which acts as a cathode, while the SHE acts as an anode.




Under standard-state conditions, the potential of the half-cell X is equal to the standard electrode potential, E°X. As the definition of cell potential requires the half-cells to function as cathodes, these potentials are also called standard reduction potentials.

Prediction of Spontaneity and the Direction of a Redox Reaction

The cell and electrode potentials dictate the spontaneity of redox reactions. It is observed that the spontaneous reactions show a positive cell potential, while the nonspontaneous process shows a negative cell potential. If the summation of the electrode potentials is positive, the reaction is said to be spontaneous. Half-cell reactions having positive electrode potential occur in the forward direction, while those with values lesser than the hydrogen electrode usually occur in the reverse order.

A stronger oxidant exhibits greater standard electrode potential, E°. As electrode potentials measure reduction capacity, an increased E° corresponds to an increased driving force behind the reduction of the species and better oxidizing abilities. Thus, E°cell is positive when E°cathode > E°anode.

Considering this, it explains why copper is oxidized by silver, but not by lead:


Prediction of Dissolution of Metal in Mineral Acids

One of the essential applications of the half-cell potentials is understanding whether a particular metal will dissolve in mineral acid. Most acids like hydrochloric acid dissolve metals by the reduction of protons to hydrogen gas and oxidation of metals to their respective ions. In the case of zinc reacting with hydrochloric acid, the reaction is spontaneous as the standard electrode potential of zinc is lower than that of hydrogen. However, copper does not react with hydrochloric acid on account of its higher electrode potential.

This text is adapted from OpenStax, Chemistry 2e, Section 17.3: Electrode and Cell Potentials.


Standard Electrode Potentials Galvanic Cell Oxidant Reductant Flow Of Electrons Half-cell Electrode Potential Potential Difference Hydrogen Electrode Standard Hydrogen Electrode (SHE) Zinc Electrode Mass Reduction Oxidation Zn2+ Ions Hydrogen Gas Anode Cathode Copper Electrode

Get cutting-edge science videos from JoVE sent straight to your inbox every month.

Waiting X
Simple Hit Counter