Name: Determining Cell Number During Cell Culture using the Scepter Cell Counter (Video) | JoVE Journal
Uploaded: 2010-11-26T18:00:00.000+00:00
Duration: 9 min 33 s
Description: Learn automated cell counting using the Scepter handheld device for accurate cell culture monitoring. This method improves accuracy, reduces user bias, and enables rapid population analysis with histogram visualization.

ai_agent_IP

ai_agent

maintenance

instantTrialDurationMinutes

isBiopharma

enableNewMyJoveSectionDesign

educationFeatures

seoMetaApi

ai_copilot_institution_blacklist

ai_chat_institution_blacklist

freeAccessWindow

ssoRoleCapture

scheduledMaintenanceBanner

joveLabsFeatures

disable_autoplay_for_bots

extended_trial_duration

5 minutes

1. The Importance of Cell Counting
<ol>
<li>Counting cells is a necessary but tedious step for in vitro cell culture.</li>
<li>Consistent cell concentrations ensure experimental reproducibility and accuracy.</li>
<li>Cell counts are important for monitoring cell health and proliferation rate, assessing immortalization or transformation, seeding cells for subsequent experiments, transfection or infection, and preparing for cell-based assays.</li>
<li>Despite the need for speed and accuracy in cell counting,, 71% of 400 researchers surveyed count cells using a hemocytometer. While hemocytometry is inexpensive, it is laborious and subject to user bias and misuse, which results in inaccurate counts.</li>
<li>Sources of error in hemocytometry include: uneven cell distribution in the sample, too many or too few cells in the sample, subjective decisions as to whether a given cell falls within the defined counting area, contamination of the hemocytometer, user-to-user variation, and variation of hemocytometer filling rate.</li>
<li>To alleviate the tedium associated with manual counting, 29% of researchers count cells using automated cell counting devices. However, for most researchers, the price associated with these large bench-top instruments is a barrier to their use.</li>
<li>The Scepter cell counter is an automated handheld device that offers the automation and accuracy of Coulter counting at a relatively low cost.</li>
<li>The system employs the Coulter principle of impedance-based particle detection in a miniaturized format using a combination of analog and digital hardware for sensing, signal processing, data storage, and graphical display.</li>
<li>The disposable sensor is engineered with a microfabricated, cell- sensing zone that enables discrimination by cell size and cell volume at sub-micron and sub-picoliter resolution.</li>
<li>Enhanced with precision liquid-handling channels and electronics, the Scepter cell counter graphically displays cell population statistics as a histogram.</li>
</ol>
2. Preparation of a Single-cell Suspension for Counting
<ol>
<li>To use the Scepter cell counter, begin by diluting a single cell suspension of cells, in phosphate buffered saline. A concentration of 10,000-500,000 cells per mL is optimal.</li>
<li>Transfer 100 μL of diluted cells to a 1.5 mL microfuge tube.</li>
</ol>
3. Performing Cell Counts using the Scepter
<ol>
<li>Turn on the Scepter cell counter by pressing and holding the toggle on the back of the instrument and wait for the on-screen instructions to appear.</li>
<li>When prompted, attach a sensor to the end of the Scepter unit with the electrode sensing panel facing toward the front of the instrument.</li>
<li>Scepter sensors consist of a precision molded sampling chamber, with an electronic sensing zone and integrated cell-sensing electrodes. The sensors make it possible to discriminate cell size at sub-micron resolution, and cell volume at sub-picoliter resolution.</li>
<li>Consistent sensor engineering, ensures that equal sample volumes are counted and accurate size measurements are made.</li>
<li>Once the sensor is attached, perform each step of the counting process according to the on-screen instructions as follows:</li>
<li>When the screen reads "Hold down the plunger to begin," depress the plunger. The screen will then read "submerge the sensor." Submerge the sensor into the cell suspension solution and release the plunger to aspirate the cell suspension into the sensor.</li>
<li>The plunger acts as an electrical signal and will draw the sample plus dead volume into the sensor. The speed or accuracy of plunging does not matter as it does with pipetting. This process will take several seconds. When ready, the instrument will beep, and "Sample loaded" will be displayed on the screen.</li>
<li>Once the sample is loaded into the sensor it is drawn through the sensing zone to assess cell size and cell volume, then through the microchannels. Once 50 μL of sample is counted the Sensor tells the instrument to stop counting.</li>
<li>After the count is complete, the instrument's screen will read "Count Complete. Please remove sensor and discard." Follow the prompt, and remove and discard the sensor.</li>
<li>The instrument will then display a histogram of cell size or diameter on its screen as well as the cell concentration per mL.</li>
</ol>
4. Data Analysis
<ol>
<li>After the count is complete and the histogram is displayed on the instrument, apply gates by pushing the toggle button. Select "auto gating" or "use last" to either automatically set the gate based on the histogram profile, or to use the gates from the previous count.</li>
<li>Regardless of the selection, the gates can be manually moved to fine-tune the data. Push the toggle button again to select the left gate and scroll the toggle to move the gate as desired.</li>
<li>Then press the toggle again to activate the right gate and scroll the toggle to place the right gate. Click again; a new cell concentration, average cell volume and diameter will be displayed.</li>
<li>The toggle can also be moved to either side to switch the display between date, time, mean cell size, and mean cell volume.</li>
<li>Up to 72 histograms can be stored on the instrument itself. To upload the data to a personal computer, attach the instrument via the USB cable port on the display screen.</li>
<li>On the PC, double click on the Scepter Software Application to launch the software then click on "connect". All counts will automatically port to the software.</li>
<li>The Scepter Application Software displays the histogram detailing the population distribution of the culture in either volume or diameter. Downloaded files can then be exported to Microsoft Excel, where the raw data will be displayed in bins of specified cell diameters or cell volumes.</li>
</ol>
5. Representative Results
<ol>
<li>Nineteen different cell lines were prepared for counting and theoretical starting concentrations were determined using a Coulter Counter. These cell suspensions were then further diluted to obtain cell suspensions at theoretical cell concentrations.</li>
<li>The Scepter cell counter was then used to determine cell concentrations. Figure 1 shows 5 dilutions that were measured for 5 representative cell lines along with the theoretical cell concentration.</li>
<li>The high degree of linearity as indicated by the R2 values, demonstrates that Scepter counting is a reliable method for the cell lines tested, across a wide linear operating range.</li>
<li>The overall relative accuracy of Scepter counting is demonstrated in Figure 2, in which data obtained from Scepter counting are compared with counts obtained from Coulter Counting.</li>
<li>The log of Scepter cell counts is plotted against the log of Coulter counts, and shows that, across all cell lines tested, Scepter counts match Coulter counts.</li>
<li>Counts of 19 cell lines were performed using a Z2 Coulter Counter, the Scepter cell counter, an automated vision-based counter such as Vi-Cell or Countless system, and a hemocytemeter. </li>
<li>Counts were performed according to the manufacturer's instructions, using the same cell starting suspension and identical dilutions. The results shown in Figure 3 demonstrate that cell concentrations measured by Scepter counting closely match theoretical cell concentrations with high linearity.</li>
<li>The percent coefficient of variation, or CV, was calculated for each dilution of each cell line for each counting system. Figure 4 shows the average %CVs over 19 cell lines with respect to cell concentration and counting method.</li>
<li>Within the operating range, the Scepter cell counter is more precise than vision based hemocytometer counting, displaying smaller standard deviations and smaller average coefficients of variation.</li>
<li>Scepter counting is ten times faster than hemocytometry and faster than other automated counters too. In Figure 5, SF9, MCF7, and HEK293 cells were counted using the methods described in this video.</li>
<li>The average time required to measure cell concentration was recorded. Note that hemocytometry was performed only once per sample.</li>
<li>Scepter makes measurements based on cell size. Thus any changes in cellular morphology can be captured in the histogram. Healthy cultures display a nice bell shaped Gaussian distribution, while unhealthy cells, lyse, and cause a shift in the histogram to the left (Figure 6, left panel).</li>
<li>Similarly, when a population of 50% dead cells were mixed with 50% live cells, histogram shifts were also observed (Figure 6, right panel).</li>
</ol>
<img src="/files/ftp_upload/2204/2204fig1.jpg" alt="Cell count vs. theoretical concentration graph; linear regression; K562, U266, HeLa, SC, SF9 data." data-altupdatedat="1761735611000" data-alt="Figure 1">
<img src="/files/ftp_upload/2204/2204fig2.jpg" alt="Scatter plot comparing cell concentration from Scepter and Z2 Coulter; analysis of cell quantification." data-altupdatedat="1761735611000" data-alt="Figure 2">
<img src="/files/ftp_upload/2204/2204fig3.jpg" alt="Cell counting graph comparing Coulter counter, hemocytometer, Scepter cytometer; error bars shown." data-altupdatedat="1761735611000" data-alt="Figure 3">
<img src="/files/ftp_upload/2204/2204fig4.jpg" alt="Cell concentration variation graph: depicts data from Coulter counter, Scepter cytometer, hemocytometer." data-altupdatedat="1761735611000" data-alt="Figure 4">
<img src="/files/ftp_upload/2204/2204fig5.jpg" alt="Cell counting time comparison, bar graph, Scepter, flow cytometer, Coulter, automated, hemocytometer." data-altupdatedat="1761735611000" data-alt="Figure 5">
<img src="/files/ftp_upload/2204/2204fig6.jpg" alt="Cell culture diameter comparison, graph analysis for normal vs neglected and 50% dead/live 3T3 cells." data-altupdatedat="1761735611000" data-alt="Figure 6">
<img src="/files/ftp_upload/2204/2204fig7.jpg" alt="Differentiation of ES cells, size distribution graphs, data analysis, cell growth tracking." data-altupdatedat="1761735611000" data-alt="Figure 7">

<ol><li>Barghshoon, S. <a target="_blank" href="http://scholar.google.com/scholar?hl=en&safe=off&q=author%3aBarghshoon%2C+S+%22Cell+Counting+Survey%22">Cell Counting Survey</a>. , Millipore. (2009).</li>
<li>Tucker, K. G., Chalder, S., al-Rubeai, M., Thomas, C. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Measurement+of+hybridoma+cell+number%2C+viability%2C+and+morphology+using+fully+automated+image+analysis%5BTitle%5D)+AND+%22Enzyme+Microb+Technol%22%5BJournal%5D)">Measurement of hybridoma cell number, viability, and morphology using fully automated image analysis.</a> Enzyme Microb Technol. 16 (1), 29-35 (1994).</li>
<li>Houwen, B. <a target="_blank" href="http://scholar.google.com/scholar?hl=en&safe=off&q=author%3aHouwen%2C+B+%22Fifty+years+of+hematology+innovation%3A+the+Coulter+principle%22">Fifty years of hematology innovation: the Coulter principle</a>. , Medical Laboratory Observer. (2003).</li>
</ol>

Kathleen Ongena, Chandreyee Das, Janet L. Smith, S&oacute;nia Gil, and Grace Johnston are employed by Millipore, which produces the instruments used in this article.

Comparing the performance of the Scepter cell counter to results from other counting methods, we conclude that this new handheld, automated cell counter delivers precise, fast, and reliable cell counts over a wide operating range. The functionality of Scepter counting is a result of the precision engineered technology embedded into the sensor tip and the sophisticated counting instrumentation based upon the Coulter principle. The performance quality suggests Scepter counting as method to increase the speed and improve the reproducibility of cell-based assays. The handheld format allows quick tedium free counting right at the cell culture hood.

<table><tbody><tr><td>Scepter 2.0 Handheld Automated Cell Counter with 40 &amp;mu;m Scepter Sensors</td><td>EMD Millipore</td><td>PHCC20040</td><td></td></tr><tr><td>Scepter 2.0 Handheld Automated Cell Counter with 60 &amp;mu;m Scepter Sensors</td><td>EMD Millipore</td><td>PHCC20060</td><td></td></tr><tr><td>Scepter Sensors, 60 &amp;mu;m</td><td>EMD Millipore</td><td>PHCC60050</td><td>50 Pack of sensors</td></tr><tr><td>Scepter Sensors, 40 &amp;mu;m</td><td>EMD Millipore</td><td>PHCC40050</td><td>50 Pack of sensors</td></tr><tr><td>Universal Power Adapter</td><td>EMD Millipore</td><td>PHCCPOWER</td><td></td></tr><tr><td>Scepter O-Ring Kit</td><td>EMD Millipore</td><td>PHCCOCLIP</td><td>2 O-rings and one filter cover</td></tr></tbody></table>

determining cell number during cell culture using the scepter cell counter

Determining Cell Number During Cell Culture using the Scepter Cell Counter

Counting cells is often a necessary but tedious step for in vitro cell culture. Consistent cell concentrations ensure experimental reproducibility and accuracy. Cell counts are important for monitoring cell health and proliferation rate, assessing immortalization or transformation, seeding cells for subsequent experiments, transfection or infection, and preparing for cell-based assays. It is important that cell counts be accurate, consistent, and fast, particularly for quantitative measurements of cellular responses.
Despite this need for speed and accuracy in cell counting, 71% of 400 researchers surveyed1 who count cells using a hemocytometer. While hemocytometry is inexpensive, it is laborious and subject to user bias and misuse, which results in inaccurate counts. Hemocytometers are made of special optical glass on which cell suspensions are loaded in specified volumes and counted under a microscope. Sources of errors in hemocytometry include: uneven cell distribution in the sample, too many or too few cells in the sample, subjective decisions as to whether a given cell falls within the defined counting area, contamination of the hemocytometer, user-to-user variation, and variation of hemocytometer filling rate2.
To alleviate the tedium associated with manual counting, 29% of researchers count cells using automated cell counting devices; these include vision-based counters, systems that detect cells using the Coulter principle, or flow cytometry1. For most researchers, the main barrier to using an automated system is the price associated with these large benchtop instruments1.
The Scepter cell counter is an automated handheld device that offers the automation and accuracy of Coulter counting at a relatively low cost. The system employs the Coulter principle of impedance-based particle detection3 in a miniaturized format using a combination of analog and digital hardware for sensing, signal processing, data storage, and graphical display. The disposable tip is engineered with a microfabricated, cell- sensing zone that enables discrimination by cell size and cell volume at sub-micron and sub-picoliter resolution. Enhanced with precision liquid-handling channels and electronics, the Scepter cell counter reports cell population statistics graphically displayed as a histogram.

The Scepter Cell Counter is a handheld automated device that can be used to count cells, monitor cell diameter and volume, and be used to check the health and quality of cellular populations from one culture to the next.

Counting cells is often a necessary but tedious step for in vitro cell culture. Consistent cell concentrations ensure experimental reproducibility and ...

The scepter cell counter is a handheld automated device for counting cells monitoring cell diameter and volume, and checking the health and quality of cellular populations. It offers significant advantages over other counting methods, including improved accuracy, ease of use, and low cost to count cells. Using the scepter, follow the instructions on its graphical display to aspirate cells into the disposable sensor.The cells are then counted and the device reports cell concentrations and statistics, which can be uploaded to a computer and analyzed. Hi, I am Sonya. I'm a research scientist here at Millport, and today I'm gonna show you how to use the scepter.Cell counter Counting cells is a necessary but tedious step for in vitro cell culture. Consistent cell concentrations ensure experimental reproducibility and accuracy. Cell counts are important for monitoring cell health and proliferation rate, assessing immortal or transformation seeding cells for subsequent experiments, transfection or infection, and preparing for cell-based assays despite the need for speed and accuracy.In cell counting, 71%of 400 researchers surveyed count cells using a hemo cytometer. While hemo cytometry is inexpensive, it is laborious and subject to user bias and misuse, which results in inaccurate counts. Sources of error in hemo cytometry include uneven cell distribution in the sample, too many or too few cells in the sample.Subjective decisions as to whether a given cell falls within the defined counting area. Contamination of the hemo cytometer, user tous variation and variation of hemo cytometer filling rate to alleviate the tedium associated with manual counting. 29%of researchers count cells using automated cell counting devices.However, for most researchers, the price associated with these large benchtop instruments is a barrier to their use. The scepter cell counter is an automated handheld device that offers the automation and accuracy of coter counting at a relatively low cost in an easy to use handheld format. The system employs the Coter principle of impedance based particle detection in a miniaturized format using a combination of analog and digital hardware for sensing signal processing, data storage, and graphical display.The disposable sensor is engineered with a micro fabricated cell sensing zone that enables discrimination by cell size and cell volume at submicron and sub picoliter resolution enhanced with precision liquid handling channels and electronics. The scepter cell counter graphically displays cell population statistics as a histogram to use. The scepter cell counter begin by diluting a single cell suspension of cells in phosphate buffered saline.A concentration of 10, 000 to 500, 000 cells per milliliter is optimal. Transfer 100 microliters of diluted cells to a 1.5 milliliter microview tube tube. Turn on the scepter cell counter by pressing and holding the toggle on the back of the instrument and wait for the onscreen instructions to appear.When prompted, attach a sensor to the end of the scepter unit with the electrode sensing panel facing toward the front of the instrument. Scepter sensors consist of a precision molded sampling chamber with an electronic sensing zone and integrated cell sensing electrodes. The sensors make it possible to discriminate cell size at submicron resolution and cell volume at sub picoliter resolution.Consistent sensor engineering ensures that equal sample volumes are counted and accurate size measurements are made. Once the sensor is attached, perform each step of the counting process according to the onscreen instructions as follows. When the screen reads, hold down the plunger to begin to press the plunger, the screen will then read submerge the sensor, submerge the sensor into the cell suspension solution, and release the plunger to aspirate the cell suspension into the sensor.The plunger acts as an electrical signal and will draw the sample plus dead volume into the sensor. The speed or accuracy of plunging does not matter as it does with pipetting. This process will take several seconds when ready.The instrument will beep and sample loaded will be displayed on the screen. Once the sample is loaded into the sensor, it is drawn through the sensing zone to assess cell size and cell volume. Then through the microchannels, once 50 microliters of sample is counted, the sensor tells the instrument to stop counting.After the count is complete, the instrument screen will read count complete. Please remove sensor and discard. Follow the prompt and remove and discard the sensor.The instrument will then display a histogram of cell size or diameter on its screen, as well as the cell concentration per milliliter. After the count is complete and the histogram is displayed on the instrument, apply gates by pushing the toggle button, select auto gating or use last to either automatically set the gate based on the histogram profile or to use the gates from the previous count. Regardless of the selection, the gates can be manually moved to fine.Tune the data, push the toggle button again to select the left gate and scroll the toggle to move the gate as desired. Then press the toggle again to activate the right gate and scroll the toggle to place the right gate. Click again.A new cell concentration, average cell volume and diameter will be displayed. The toggle can also be to either side to switch the display between date time, mean cell size, and mean cell volume up to 72 histograms can be stored on the instrument itself. To upload the data to a personal computer, attach the instrument via the USB cable port, on the display screen on the pc.Double click on the scepter software application to launch the software. Then click on connect. All counts will automatically port to the software.The scepter application software displays the histogram detailing the population distribution of the culture in either volume or diameter. Downloaded files can then be exported to Microsoft Excel, where the raw data will be displayed in bins of specified cell diameters or cell volumes. 19 different cell lines were prepared for counting and theoretical starting concentrations were determined using aculter counter.These cell suspensions were then further diluted to obtain cell suspensions at theoretical cell concentrations. The scepter cell counter was then used to determine cell concentrations. This figure shows five dilution that were measured for five representative cell lines along with the theoretical cell concentration.The high degree of linearity, as indicated by the r-squared values, demonstrates that scepter counting is a reliable method for the cell lines tested across a wide linear operating range. The overall relative accuracy of scepter counting is demonstrated here in which data obtained from scepter counting are compared with counts obtained from coter counting. The log of scepter cell counts is plotted against the log of coter counts and shows that across all cell lines tested scepter counts match coter counts.Counts of 19 cell lines were performed using a Z two coulter counter. The scepter cell counter, an automated vision-based counter, such as V cell or count test system, and a hemo TER counts were performed according to the manufacturer's instructions using the same cell starting suspension and identical dilutions. Results shown in this figure demonstrate that cell concentrations measured by scepter counting closely match theoretical cell concentrations with high linearity.The percent coefficient of variation or CV was calculated for each dilution of each cell line. For each counting system shown here are the average percent CVS over 19 cell lines with respect to cell concentration and counting method within the operating range. The scepter cell counter is more precise than hemo cytometer counting, displaying smaller standard deviations and smaller average coefficients of variation.Scepter counting is 10 times faster than hemo cytometry and faster than other automated counters too. Here SF nine, MCF seven and HC 2 93 cells were counted using the methods described in this video. The average time required to measure cell concentration was recorded.Note that hemo cytometry was performed only once per sample. Scepter makes measurements based on cell size. Thus, any changes in cellular morphology can be captured in the histogram.Healthy cultures display a nice bell-shaped Gaussian distribution while unhealthy cells lice and cause a shift in the histogram to the left. Similarly, when a population of 50%dead cells were mixed with 50%live cells histogram shifts were also observed. I've just shown you how to use the new scepter cell counter for millipore, which is revolutionizing the way that researchers count their cells.

determining-cell-number-during-cell-culture-using-scepter-cell

Research

JoVE Journal

Biology

Knowledge of the exact number of viable cells is required for many tissue culture manipulations.  This protocol describes how to differentiate between live and dead cells and quantify cells using a hemacytometer.  Although it describes counting human neural stem/precursor cells (hNSPCs), it can be used for other cell types.

Counting Human Neural Stem Cells

Determining the number of cells in culture is important in standardization of culture conditions and in performing accurate quantitation experiments.  In this video, we demonstrate how cells are counted using a hemacytometer.

Counting and Determining the Viability of Cultured Cells

The Moxi Z miniature automated cell counter is a novel instrument that combines the Coulter Principle with patented thin-film sensor technology and a proprietary software algorithm to perform sizing and counting of a broad size range of particles as well as to determine the overall health of monodisperse mammalian cell cultures. This protocol describes the use of this instrument for counting and assessing the health of cell cultures.

Determination of Mammalian Cell Counts, Cell Size and Cell Health Using the Moxi Z Mini Automated Cell Counter

This protocol describes the use of three different methods for analyzing cell proliferation in breast cancer cell lines. This includes the use of conventional cell counting, luminescence-based cell viability, and cell counting through the use of a cell imager. Each offers advantages for the reproducible measurement of cell proliferation.

Comparison of Three Different Methods for Determining Cell Proliferation in Breast Cancer Cell Lines

This paper describes the quantification of hemocytometer and migration/invasion micrographs through two new open-source ImageJ plugins Cell Concentration Calculator and migration assay Counter.  Furthermore, it describes image acquisition and calibration protocols as well as discusses in detail the input requirements of the plugins.

Automated Quantification and Analysis of Cell Counting Procedures Using ImageJ Plugins

It is often necessary to assess the potential cytotoxicity of a set of compounds on cultured cells. Here, we describe a strategy to reliably screen for toxic compounds in a 96-well format.

A Strategy to Identify Compounds that Affect Cell Growth and Survival in Cultured Mammalian Cells at Low-to-Moderate Throughput

Crosstalk between mammary epithelial cells and endothelial cells importantly contributes to breast cancer progression, tumor growth, and metastasis. In this study, spheroids have been made from breast cancer cells together with vascular and/or lymphatic endothelial cells and demonstrate their applicability as an in vitro system for breast cancer research.

Mammary Epithelial and Endothelial Cell Spheroids as a Potential Functional In vitro Model for Breast Cancer Research

This protocol provides a comprehensive guideline for the setup and quantitative monitoring of co-cultures, including photoautotrophic sugar-secreting cyanobacteria and heterotrophic yeasts.

Assembly and Quantification of Co-Cultures Combining Heterotrophic Yeast with Phototrophic Sugar-Secreting Cyanobacteria

This article describes a protocol for mechanical characterisation of living spheroids within a 3D matrix using Brillouin micro-spectroscopy. This all-optical method enables spheroid visualisation with microscale resolution and quantitative mechanical properties. This approach has implications for mechanical phenotyping; for instance, determining pathological states of tumor spheroids within a 3D microenvironment.

Mechanical Mapping of Spheroids Using Brillouin Spectroscopy

There is a critical need for 3D cancer models that capture heterocellular crosstalk to study cancer metastasis. Our study presents the generation of heteromulticellular stromal-epithelial in a scaffold and scaffold-free environment that can be used to study invasion and cellular spatial distributions.

Heteromulticellular Stromal Cells in Scaffold-free 3D Cultures of Epithelial Cancer Cells to Drive Invasion

Learn automated cell counting using the Scepter handheld device for accurate cell culture monitoring. This method improves accuracy, reduces user bias, and enables rapid population analysis with histogram visualization.

Determining Cell Number During Cell Culture using the Scepter Cell Counter

Explore More Videos