PDMS Bauelementherstellung und Oberflächenmodifizierung

Published 10/01/2007
15 Comments
  CITE THIS  SHARE 
Biology

You must be subscribed to JoVE to access this content.

Fill out the form below to receive a free trial:

Welcome!

Enter your email below to get your free 10 minute trial to JoVE!





By clicking "Submit," you agree to our policies.

 

Summary

Cite this Article

Copy Citation

Kotz, K., Cheng, X., Toner, M. PDMS Device Fabrication and Surface Modification. J. Vis. Exp. (8), e319, doi:10.3791/319 (2007).

Please note that all translations are automatically generated through Google Translate.

Click here for the english version. For other languages click here.

Abstract

Comments

15 Comments

  1. I would like to know about the chaotic mixer for microchannels, could you please help me on that? Esmaeil.

    Reply
    Posted by: Anonymous
    February 16, 2008 - 2:22 AM
  2. What would you like to know?  We have a fair bit of experience in our lab with different mixer designs.  Is there a particular application that you looking into? Ken 

    Reply
    Posted by: Anonymous
    February 18, 2008 - 9:01 AM
  3. Thanks for respond Ken,I would like to know if there is a JORNAL movie regarding the chaotic mixer for microchannels?or I need to have enough knowledge to critic (Abraham D.Stroock paper: Chaotic Mixer for Microchannels). Best, Esmaeil.  

    Reply
    Posted by: Anonymous
    February 18, 2008 - 10:12 AM
  4. Hello David, The devices will soon be commercially available. Please email xonamicrofluidics@gmail.com for more information

    Reply
    Posted by: Joseph H.
    June 4, 2008 - 7:51 PM
  5. during silanization of surface, you use 5% of silane is it in absolute ethanol or in H²O? did you characterize surface coverage of functional groups on channel surface?

    Reply
    Posted by: Anonymous
    July 4, 2008 - 12:33 PM
  6. We do 5% silane in either absolute ethanol or in 95% ethanol (5% H²0).  Water catalyzes the silanization and so you need to react a bit longer with the anhydrous ethanol to get good coverage. Typically for anhydrous conditions, we react for ~30 minutes and for the 5% aqueous, we react only 10 minutes. We did not fully characterize the surface coverage of the functional groups on the surface.  You could take the device apart and use XPS to look at the atomic composition of the surface.  We determined the optimal conditions more empirically than that - we modified conditions for the highest density surface coverage by the cells that we wanted to capture.   Ken

    Reply
    Posted by: Anonymous
    July 7, 2008 - 10:09 AM
  7. hi how can i download this video please ? my email address : sg_ghoreishi@sut.ac.ir

    Reply
    Posted by: Anonymous
    July 17, 2008 - 5:04 AM
  8. Hi, Can you please tell me what was the pH of the silane solution that you used? Thanks in anticipation. Regards nidhi

    Reply
    Posted by: Anonymous
    August 4, 2008 - 9:04 PM
  9. It was neutral pH, but can and perhaps should be slightly acidic.  You can make the ethanol solution slightly acidic ~pH 5 with acetic acid.  This will speed up the reaction, and you will need to shorten the time in silane/ethanol solution to about 5 minutes. Also be sure to wash throughly if you go this route.

    Reply
    Posted by: Anonymous
    August 5, 2008 - 9:52 AM
  10. very ingenious device!Great!

    Reply
    Posted by: Anonymous
    October 25, 2008 - 7:46 AM
  11. Great article - thanks for sharing.  I had one question.  Where did you get the spouts for pouring PDMS?  PDMS pouring can be such a mess, and it looks like you have found a nice solution.  If you could share the product information, I would appreciate it.  Thanks!  

    Reply
    Posted by: Anonymous
    November 10, 2008 - 6:23 PM
  12. Dear Kotz, Great work!!! I have a question not related to the experiment. I wonder from where you got those dispensers for the PDMS and the curing agent. Do you get these from Dow Corning? Or you have any other supplier. I will appreciate if you can please share this information with me. My email ID is a.asthana@uq.edu.au. Best regards Amit  

    Reply
    Posted by: Amit A.
    April 14, 2009 - 8:11 PM
  13. Dear Kenneth Kotz

    I have found your work as one of the best processes in microfluidic fabrication.
    I have tried to repeat this process in my laboratory, but I have a problem for peeling
    off PDMS from master mould. Would you please more explain for me about this process? The
    material of Petri dish that you used is glass or plastic? And when I pour PDMS on the
    master, during the curing process PDMS adhere to the Petri dish either glass and plastic,
    in addition the adhesive problem related PDMS and master mould.
    I want to explain more about my problem. In fact I used glass Petri dish and put the
    master mould in it and when I pour PDMS on the master mold, it will be spread and some of
    the PDMS penetrate under the master mould and causes the adhesion between glass wall of
    the Petri Dish and master mould and as a result the master mould break when I want to
    peel off PDMS and pick up mould master.
    In the other hand although I use silanization process for peeling off the
    PDMS from master mould, it is not effective. I think these problems are related together.
    Would you please explain for me how can I solve them?
    I would appreciate you for helping me.
    I am looking forward to hearing from you.

    Thanks
    H.Madadi

    Reply
    Posted by: Anonymous
    June 28, 2011 - 5:16 AM
  14. The master mold was fixed in a polystyrene petri dish with clean room adhesive tape taping the edge. A small amount of liquid PDMS dŒs penetrate under the wafer, but we cut out the PDMS device with a surgical razor blade. If you want to release PDMS from the whole wafer, you need to cut along the edge of the wafer first using a razor blade.

    Reply
    Posted by: Anonymous
    June 28, 2011 - 10:19 AM
  15. Hello,
    I am currently about to start a project investigating glycoproteins-E-selectin in ovarian cancer, and will need to use a microfluidic device. This device is being fabricated by the mechanical engineering department in my university.
    However, they have minimal experience in this area, and have asked me to research what the microfluidic channel would be coated with for our purposes.
    I would eventually need to be able to both immobilise proteins on the walls of the channel and make cells adhere in a monolayer in the channel. I am unable to find much clear information whether a silane coating will fulfil both these functions, and am looking for more information.
    Could you please tell me about what sort of coating will be required in order to be able to achieve both these aims?
    Thank you,
    --
    Shashwati Kala

    Reply
    Posted by: Shashwati K.
    January 29, 2013 - 3:58 AM

Post a Question / Comment / Request

You must be signed in to post a comment. Please or create an account.

Video Stats