Waiting
Login processing...

Trial ends in Request Full Access Tell Your Colleague About Jove
Journal / Bioengineering / 工程血管移植缩放使用3D打印指南和环堆叠方法…
JoVE Journal
Bioengineering

A subscription to JoVE is required to view this content.
You will only be able to see the first 2 minutes.

JoVE Journal Bioengineering
工程血管移植缩放使用3D打印指南和环堆叠方法
Advanced 3D Liver Models for In vitro Genotoxicity Testing Following Long-Term Nanomaterial Exposure
Journal (Bioengineering)
Advanced 3D Liver Models for In vitro Genotoxicity Testing Following Long-Term Nanomaterial Exposure
An Open Source Technology Platform to Manufacture Hydrogel-Based 3D Culture Models in an Automated and Standardized Fashion
Journal (Bioengineering)
An Open Source Technology Platform to Manufacture Hydrogel-Based 3D Culture Models in an Automated and Standardized Fashion
 
Click here for the English version

工程血管移植缩放使用3D打印指南和环堆叠方法

Article DOI: 10.3791/55322 • 09:38 min
March 27th, 2017 •
1, 1, 1,2
1Department of Biomedical Engineering, Wayne State University, 2Cardiovascular Research Institute, Wayne State University

Chapters

Summary
Automatic Translation
March 27th, 2017

Please note that all translations are automatically generated.

Click here for the English version.

可扩展的工程血管会提高临床适用性。使用容易可观3D印刷指南，创建并堆叠成管状形式，形成血管移植血管平滑肌的环。移植物的大小可通过简单地改变三维印刷导向大小，以满足人冠状动脉的尺寸范围。

Read Article

Get cutting-edge science videos from JoVE sent straight to your inbox every month.

Waiting X
Simple Hit Counter